3IF771.9

Short description

Communication module	1x CAN bus

General information

Status indicators	Transmitting/Receiving data for IF1
Diagnostics
Data transfer	Yes, using LED status indicators
Power consumption
3.3 VDC	0.64 W
5 VDC	0.66 W
Total	1.3 W
Electrical isolation
PLC - IF1	Yes
Certifications
CE	Yes
UKCA	Yes
HazLoc	cULus HazLoc E180196 Industrial control equipment for hazardous locations Class I, Division 2, Groups ABCD
KC	Yes

Interfaces

Interface IF1
Signal	CAN bus
Variant	4-pin male multipoint connector
Max. distance	1000 m
Transfer rate	Max. 500 kbit/s

Operating conditions

Degree of protection per EN 60529	IP20

Ambient conditions

Temperature
Operation	0 to 60°C
Storage	-25 to 70°C
Relative humidity
Operation	5 to 95%, non-condensing

Mechanical properties

Note	Order 1x terminal block TB704 separately.
Slot	Slot, e.g. in the CP360

Número de material:

3IF771.9

Descripción:

CAN bus connection as single interface

aPCI interface module, 1 CAN bus interface, max. 500 kbit/s, electrically isolated, network-capable, object buffer in the transmit and receive directions, order 1x terminal block TB704 separately!

Accesorios obligatorios

Terminal blocks

0TB704.9	Accessory terminal block, 4-pin, screw clamp terminal block 2.5 mm²
0TB704.91	Accessory terminal block, 4-pin, push-in terminal block 2.5 mm²

Accesorios opcionales

Infrastructure components

0AC913.93	Bus adapter, CAN bus, 2 CAN bus interfaces, including 03 m attachment cable (TB704)

Actualizaciones de hardware de Automation Studio	Versión (fecha)	Descargar
V2.6 HW Upgrade (3IF771.9)		EXE / 449 KB Para descargar se debe iniciar sesión
V3.0 HW Upgrade (3IF771.9)		EXE / 449 KB Para descargar se debe iniciar sesión
V4.0 HW Upgrade (3IF771.9)		EXE / 346 KB Para descargar se debe iniciar sesión

Documentación	Versión (fecha)	Descargar
Datasheet 3IF771.9		PDF / 271 KB Para descargar se debe iniciar sesión