• Site
  • Model Numarası
  • Seri Numarası
Üye Girişi
Aktif KullanıcıKullanıcı AdıÇıkış
Yükleniyor...
B&R Logo
  • Teknik Bilgiler

  • Temel Bilgiler

  • Aksesuarlar

  • İndir

  • Revizyonlar

  • Seri No

    Status displayGreen LED (DC OK), threshold value Uout = 21.5 V
    Isolation voltages
    Input - Output4 kV AC (type test)
    2 kV AC (routine test)
    Input - PE2 kV AC (type test)
    2 kV AC (routine test)
    Output - PE500 VDC (routine test)
    Connection typeScrew clamp connection
    Connection cross section
    Input
    Wire end sleevesFlexible cables require wire end sleeves in order to fulfill EN 60950 / UL 60950
    Flexible0.2 to 2.5 mm² / 24 to 14 AWG
    Inflexible0.2 to 2.5 mm² / 24 to 14 AWG
    Output
    Wire end sleevesFlexible cables require wire end sleeves in order to fulfill EN 60950 / UL 60950
    Flexible0.5 to 4 mm² / 12 to 10 AWG
    Inflexible0.5 to 6 mm² / 12 to 10 AWG
    Wire stripping length9 mm (input)
    14 mm (output)
    Certifications
    CEYes
    ULcULus E123528
    Industrial control equipment
    Nominal input voltage2/3x 400 to 500 VAC
    Input voltage3x 320 to 575 VAC, 45 to 65 Hz
    2x 360 to 575 VAC, 45 to 65 Hz
    Input current3x 1.1 A (400 VAC)
    3x 0.8 A (480 VAC)
    Inrush current limitation<15 A
    I2t0.5 A2s
    Power failure bypass>17 ms (400 VAC)
    >20 ms (480 VAC)
    Switch-on time<1 s (typical)
    Power factor (cos φ)0.67
    Discharge current to PE<3.5 mA
    Protective circuitTransient surge protection (varistor)
    Required line fuse for device and line protection2/3x 6 A (characteristic B)
    2/3x 10 A (characteristic B)
    2/3x 16 A (characteristic B)
    Nominal voltage24 VDC ±1%
    Output power480 W
    Setting range for output voltage22.5 to 29.5 VDC
    Output current
    -25 to 55°C20.0 A
    >55°CDerating: 2.5% per °C
    Current limitationApprox. 25 A
    Control deviation<1% (static load change 10 to 90%)
    <2% (dynamic load change 10 to 90%)
    <0.1% (input voltage change ±10%)
    Rise time<2 ms (UOUT (10 to 90%))
    Residual ripple<10 mVSS
    Switching peaks<50 mVSS
    Can be connected in parallelYes, to establish redundancy and increase capacity
    Can be connected in seriesNo
    Max. capacitive loadUnlimited
    Protection against internal overvoltagesYes, limited to <35 VDC
    Protection functionsOutput protected against continuous short circuit, open circuit and overload
    Power back immunityMax. 35 VDC
    Output noise suppressionUnit complies with EN 55011 (Class B)
    Efficiency>91%
    MTBF>500,000 h, in accordance with IEC 61709 (SN 29500)
    Power dissipation
    Rated loadMax. 48 W
    No-load operationMax. 6 W
    Mounting orientation
    HorizontalYes
    VerticalNo
    Ventilation/CoolingNormal convection, no fan required
    Degree of protection per EN 60529IP20
    Rated protectionI, with PE connection
    Temperature
    Operation-25 to 70°C (>55°C derating)
    Storage-40 to 85°C
    Transport-40 to 85°C
    Relative humidity
    OperationMax. 95%, non-condensing
    Vibration
    Operation<15 Hz, amplitude ±2.5 mm, in accordance with IEC 60068-2-6
    15 to 150 Hz, 2.3 g, 90 min
    Shock
    Operation30 g in each direction, in accordance with IEC 60068-2-27
    Pollution degree2, in accordance with EN 50178
    Climate category3K3, in accordance with EN 60721
    Housing
    MaterialSheet metal, galvanized
    Side panels: Aluminum
    InstallationEasy rail mounting (DIN rail NS 35, EN 60715)
    Dimensions
    Width115 mm
    Height130 mm
    Depth152.5 mm
    Weight2000 g

0PS3200.1

  • 400 to 500 VAC wide-range input
  • Reliable supply even if one phase briefly fails in 3-phase operation
  • High dielectric strength
  • Can be connected in parallel for increased capacity and redundancy
  • Reliable operation due to long power failure bypass function under full load and high MTBF (>500,000 h)
  • International certification package
  • Wide temperature range from -25 to 70°C
  • Closed metal housing
-
Product description:
Material number:
0PS3200.1
Description:
24 VDC power supply, 3 phase, 20 A, input 400 to 500 VAC, wide range, top-hat rail installation
Hepsini Aç/Kapat
Share
Um Ihnen benutzerdefinierte Einstellungen auf br-automation.com bereitstellen zu können, speichert B&R Informationen über Ihren Besuch in sogenannten Cookies. Durch die Nutzung dieser Webseite erklären Sie sich mit der Verwendung von Cookies einverstanden. Informationen über den Einsatz von Cookies erhalten Sie in unserer Veri Koruma Bildirimi.