Lütfen ülke ve dil seçiniz

Short description
I/O module 8 digital outputs 11.5 to 30 V for 1-wire connections
General information
B&R ID code 0xDF4E
Status indicators Operating state, module status
Diagnostics
Module run/error Yes, using status LED and software
Outputs Yes, using software
Power consumption
Bus 160 mW
Internal I/O 200 mW (without load)
Additional power dissipation caused by actuators (resistive) [W] -
Certifications
CE (CE) Yes
ATEX Zone 2 (EX) II 3G nA nC T5 IP20 BR
UL (cULus) LISTED UL 508 E115267
CSA HazLoc Cl I Div 2 (cCSAus) ABCD T5 0-60°C IP20 BR
EAC (EAC) BR
Digital outputs
Variant FET push/pull (high-resistance)
Nominal voltage 11.5 to 30 V
Nominal output current 0.5 A
Total nominal current 4 A
Connection type 1-wire connections
Output circuit Sink / source
Diagnostic status
Voltage monitoring 11.5 V < supply voltage < 30 V
Output monitoring Output OK
Leakage current when the output is switched off 5 μA per channel
RDS(on) 120 mΩ (low-side), 140 mΩ (high-side)
Switching delay
0 → 1 Max. 450 μs
1 → 0 Max. 450 μs
Switching frequency
Resistive load Max. 100 Hz
Insulation voltage between channel and bus 500 V
Reverse polarity protection Yes
Switching voltage
Minimum 11.5 VDC
Nominal 12 to 24 VDC
Maximum 30 VDC
Protective circuit
External 24 VDC voltage supply – Maximum current 5A (blow-out fuse)
Internal Thermal cutoff, integrated protection for switching inductances
Electrical properties
Electrical isolation Channel isolated from bus
Channel not isolated from channel and I/O power supply
Operating conditions
Mounting orientation
Horizontal Yes
Vertical Yes
Installation elevation above sea level
0 to 2000 m No limitations
>2000 m Reduction of ambient temperature by 0.5°C per 100 m
Degree of protection per EN 60529 IP20
Ambient conditions
Temperature
Operation
Horizontal mounting orientation -25 to 60°C
Vertical mounting orientation -25 to 50°C
Derating -
Storage -40 to 85°C
Transport -40 to 85°C
Relative humidity
Operation 5 to 95%, non-condensing
Storage 5 to 95%, non-condensing
Transport 5 to 95%, non-condensing
Mechanical properties
Note Order 1x X20TB12 terminal block separately
Order 1x X20BM11 bus module separately
Pitch 12.5+0.2 mm
Malzeme Numarası:
X20DO8323
Açıklama:
  • 8 digital outputs
  • High-side or low-side connection
  • Push/pull outputs
  • 1-wire connections
  • Integrated output protection

The module is an electrically isolated 8-channel digital output module. It can be configured as high-side or low-side or as a push/pull output for controlling 12 to 24 VDC DC motors.

Gerekli aksesuarlar
Bus modules
X20BM11 X20 bus module, 24 VDC keyed, internal I/O supply continuous
X20BM15 X20 bus module, with node number switch, 24 VDC keyed, internal I/O power supply connected through
Terminal blocks
X20TB12 X20 terminal block, 12-pin, 24 VDC keyed
Automation Studio Donanım Güncellemeleri Version (Date) Download
V3.0 HW Upgrade (X20DO8323) EXE / 1 MB
V4.0 HW Upgrade (X20DO8323) EXE / 623 KB
Dokümantasyon Version (Date) Download
Data sheet X20DO8323 PDF / 225 KB
X20 System User´s Manual PDF / 56 MB
E-CAD (Elektrik veya EPLAN Taslakları) Version (Date) Download
X20 EPLAN P8 from V2.4 EXE / 123 MB
M-CAD (Mekanik Taslaklar) Version (Date) Download
3D File DXF/STEP X20 Electronic module ZIP / 10 KB
3D File STEP X20 I/O-Slice ZIP / 872 KB
Dimensions PDF X20 Electronic module PDF / 3 KB
Sertifikalar Version (Date) Download
244665 CSA HazLoc Certificate of Compliance X20, X67 PDF / 56 KB
E115267 UL CoC X20 PDF / 847 KB
FTZU 09 ATEX 0083X PDF / 697 KB

Lütfen ülke ve dil seçiniz

B&R Logo

Please choose country

B&R Logo