Lütfen ülke ve dil seçiniz

Short description
Communication module PROFINET IO device (slave)
General information
B&R ID code 0xE238
Status indicators Module status, network status, data transfer
Diagnostics
Module status Yes, using status LED and software
Network status Yes, using status LED and software
Data transfer Yes, using status LED
Power consumption 2 W
Additional power dissipation caused by actuators (resistive) [W] -
Certifications
CE Yes
ATEX Zone 2, II 3G Ex nA nC IIA T5 Gc
IP20, Ta (see X20 user's manual)
FTZÚ 09 ATEX 0083X
UL cULus E115267
Industrial control equipment
HazLoc cCSAus 244665
Process control equipment
for hazardous locations
Class I, Division 2, Groups ABCD, T5
DNV GL Temperature: B (0 - 55°C)
Humidity: B (up to 100%)
Vibration: B (4 g)
EMC: B (bridge and open deck)
LR ENV1
KR Yes
ABS Yes
EAC Yes
Interfaces
Fieldbus PROFINET IO device (slave)
PROFINET attributes
Conformance class C
Performance class RT (switch supports IRT)
Netload class III
Variant 2x shielded RJ45 (switch)
Cable length Max. 100 m between 2 stations (segment length)
Transfer rate 100 Mbit/s
Transfer
Physical layer 100BASE-TX
Half-duplex Yes
Full-duplex Yes
Autonegotiation Yes
Auto-MDI/MDIX Yes
Controller netX100
Electrical properties
Electrical isolation PLC isolated from PROFINET IO (IF1 and IF2)
Operating conditions
Mounting orientation
Horizontal Yes
Vertical Yes
Installation elevation above sea level
0 to 2000 m No limitations
>2000 m Reduction of ambient temperature by 0.5°C per 100 m
Degree of protection per EN 60529 IP20
Ambient conditions
Temperature
Operation
Horizontal mounting orientation -25 to 60°C
Vertical mounting orientation -25 to 50°C
Derating -
Storage -40 to 85°C
Transport -40 to 85°C
Relative humidity
Operation Up to 100%, condensing
Storage 5 to 95%, non-condensing
Transport 5 to 95%, non-condensing
Mechanical properties
Slot In the X20c CPU and in the X20cBC1083 expandable bus controller
Malzeme Numarası:
X20cIF10E3-1
Açıklama:
  • PROFINET IO device
  • Integrated switch for efficient cabling

The interface module is equipped with a PROFINET IO device interface. This allows the B&R system (I/O modules, POWERLINK, etc.) to be connected to systems from other manufacturers and makes it possible to quickly and easily transfer data in both directions.

The interface module can be operated in X20 CPUs or in the expandable POWERLINK bus controller X20BC1083.

The interface is equipped with 2 RJ45 connections. Both connections result in an integrated switch. This makes it easy to implement daisy chain cabling.

Automation Studio Donanım Güncellemeleri Version (Date) Download
V3.0 HW Upgrade (X20cIF10E3-1) EXE / 2 MB
V4.0 HW Upgrade (X20cIF10E3-1) EXE / 1 MB
Dokümantasyon Version (Date) Download
Coated modules PDF / 60 KB
Data sheet X20(c)IF10E3-1 PDF / 2 MB
X20 System User´s Manual PDF / 56 MB
E-CAD (Elektrik veya EPLAN Taslakları) Version (Date) Download
X20 EPLAN P8 from V2.4 EXE / 161 MB
Fieldbus Donanım Tanımlama Dosyaları Version (Date) Download
X20cIF10E3-1 GSD Package ZIP / 11 KB
M-CAD (Mekanik Taslaklar) Version (Date) Download
3D File STEP/DXF X20 Module ZIP / 1 MB
Sertifikalar Version (Date) Download
244665 CSA HazLoc Certificate of Compliance X20, X67 PDF / 56 KB
ABS Type Approval Certificate - X20 IO Series PDF / 2 MB
DNV GL Type Approval Certificate - X20 / Power Panel T30 PDF / 164 KB
E115267 UL CoC X20 PDF / 847 KB
FTZU 09 ATEX 0083X PDF / 697 KB
KR Type Approval Certificate MIL39390-AC003 (X20 System) PDF / 758 KB
Lloyds Register PDF / 506 KB

Lütfen ülke ve dil seçiniz

B&R Logo