DWL@DWL10000133497
Sürüm | Dil | İşletim sistemi | Tarih | Boyut | Tip | İndirme |
---|---|---|---|---|---|---|
1.4.3 | DE | WinXP, WES2009, Win7/32bit, Win7/64bit, WES7, Windows8.1, Windows10 | 02/20/2018 | 10 MB | ZIP | B_R_Touch_Driver_V1_4_3.zip |
Açıklama |
Touch driver B&R (WinXP, Win7, Win8.1, Win10 32/64-bit) ---------------------------------------------------------------- GENERAL INFORMATION ---------------------------------------------------------------- The Touch driver supports serial touch screens on B&R devices. You can change and view settings of these touch screens with the touch screen applet in the Control Panel. This driver is recommended for B&R devices with Windows 7 and Windows Embedded Standard 7 or newer and generally for devices with an B&R touch controller. ---------------------------------------------------------------- REQUIREMENTS ---------------------------------------------------------------- Supported operating systems: - Windows XP SP3 - Windows Embedded Standard 2009 - Windows 7 SP1 - Windows Embedded Standard 7 SP1 - Windows 8.1 - Windows 10 Supported serial touch controllers: - B&R (standard) - ELO (COACHII or compatible) You must have administrator rights for installation and to change touch settings! ---------------------------------------------------------------- INSTALLATION ---------------------------------------------------------------- To install this software: 1. Close all applications. 2. Start the setup .exe file (for example by double click in the Explorer). An already existing touch driver will be recognized during installation and can be removed automatically. You can select the installation language, installation directory and start menu entry during installation. In addition you can specify on which serial ports a touch screen is connected and should be installed. Connected touch screen can also be detected and installed automatically. You can also choose if Windows touch features shall be used (operating mode "touch mode"). If this option isn't selected the driver is working in "mouse mode". This is the "classic" operating mode: all touch operations are handled by the system like mouse clicks. The mode can be changed after the installation also. You can find more information about the operating modes in the touch driver help. Depending on the used operating system and the system settings a message may be shown, that the driver is not WHQL certified. Confirm this message with "Install" (or Continue"). ---------------------------------------------------------------- LANGUAGE SUPPORT ---------------------------------------------------------------- The installed software contains german and english dialogs and text that are shown depending on display language selected in the Windows control panel (with region and language settings). The start menu entries are created in the language which is selected at installation. ---------------------------------------------------------------- Version 1.4.3 / 2017-12-21 / HOH ---------------------------------------------------------------- Changes - With "silent" installation the progress dialog for the search or installation of the touch devices is no longer displayed. As a result, the installation can now also be performed in the system context without a desktop. |
|||||
Sürüm | Dil | İşletim sistemi | Tarih | Boyut | Tip | İndirme |
1.4.2 | DE | WinXP, WES2009, Win7/32bit, Win7/64bit, WES7, Windows8.1, Windows10 | 01/29/2018 | 10 MB | ZIP | B_R_Touch_Driver_V1_4_2.zip |
Açıklama |
Touch driver B&R (WinXP, Win7, Win8.1, Win10 32/64-bit) ---------------------------------------------------------------- GENERAL INFORMATION ---------------------------------------------------------------- The Touch driver supports serial touch screens on B&R devices. You can change and view settings of these touch screens with the touch screen applet in the Control Panel. This driver is recommended for B&R devices with Windows 7 and Windows Embedded Standard 7 or newer and generally for devices with an B&R touch controller. ---------------------------------------------------------------- REQUIREMENTS ---------------------------------------------------------------- Supported operating systems: - Windows XP SP3 - Windows Embedded Standard 2009 - Windows 7 SP1 - Windows Embedded Standard 7 SP1 - Windows 8.1 - Windows 10 Supported serial touch controllers: - B&R (standard) - ELO (COACHII or compatible) You must have administrator rights for installation and to change touch settings! ---------------------------------------------------------------- INSTALLATION ---------------------------------------------------------------- To install this software: 1. Close all applications. 2. Start the setup .exe file (for example by double click in the Explorer). An already existing touch driver will be recognized during installation and can be removed automatically. You can select the installation language, installation directory and start menu entry during installation. In addition you can specify on which serial ports a touch screen is connected and should be installed. Connected touch screen can also be detected and installed automatically. You can also choose if Windows touch features shall be used (operating mode "touch mode"). If this option isn't selected the driver is working in "mouse mode". This is the "classic" operating mode: all touch operations are handled by the system like mouse clicks. The mode can be changed after the installation also. You can find more information about the operating modes in the touch driver help. Depending on the used operating system and the system settings a message may be shown, that the driver is not WHQL certified. Confirm this message with "Install" (or Continue"). ---------------------------------------------------------------- LANGUAGE SUPPORT ---------------------------------------------------------------- The installed software contains german and english dialogs and text that are shown depending on display language selected in the Windows control panel (with region and language settings). The start menu entries are created in the language which is selected at installation. ---------------------------------------------------------------- Version 1.4.2 / 2017-07-13 / HOH ---------------------------------------------------------------- Fixes - Error message "BrTouchSelect: attempted an unsupported operation" could happen at uninstall on slow CPUs (for example Intel Celeron 827E). - Company name adapted. |
|||||
Sürüm | Dil | İşletim sistemi | Tarih | Boyut | Tip | İndirme |
1.4.1 | DE | WinXP, WES2009, Win7/32bit, Win7/64bit, WES7, Windows8.1, Windows10 | 02/27/2017 | 11 MB | ZIP | B_R_Touch_Driver_V1_4_1.zip |
Açıklama |
Touch driver B&R (WinXP, Win7, Win8.1, Win10 32/64-bit) ---------------------------------------------------------------- GENERAL INFORMATION ---------------------------------------------------------------- The Touch driver supports serial touch screens on B&R devices. You can change and view settings of these touch screens with the touch screen applet in the Control Panel. This driver is recommended for B&R devices with Windows 7 and Windows Embedded Standard 7 or generally for Power Panel 500. ---------------------------------------------------------------- REQUIREMENTS ---------------------------------------------------------------- Supported operating systems: - Windows XP SP3 - Windows Embedded Standard 2009 - Windows 7 SP1 - Windows Embedded Standard 7 SP1 - Windows 8.1 - Windows 10 Supported serial touch controllers: - B&R (standard) - ELO (COACHII or compatible) You must have administrator rights for installation and to change touch settings! ---------------------------------------------------------------- INSTALLATION ---------------------------------------------------------------- To install this software: 1. Close all applications. 2. Start the setup .exe file (for example by double click in the Explorer). You can select the installation language, installation directory and start menu entry during installation. In addition you can specify on which serial ports a touch screen is connected and should be installed. Connected touch screen can also be detected and installed automatically. Depending on the used operating system and the system settings a message may be shown, that the driver is not WHQL certified. Confirm this message with "Install" (or Continue"). ---------------------------------------------------------------- LANGUAGE SUPPORT ---------------------------------------------------------------- The installed software contains german and english dialogs and text that are shown depending on display language selected in the Windows control panel (with region and language settings). ---------------------------------------------------------------- APPLICATION NOTES ---------------------------------------------------------------- The touch driver can be used in two operating modes: Touch Mode</> - This mode is only possible on systems with Tablet PC support like Windows 7 and Windows Embedded Standard 7 Premium. - Following touch features are supported by the system: * right-click over time * flicks * multiple touch screens in Extended Desktop mode Note: for that each touch screen must communicate over a separate serial port, for example COM3 and COM4 on APC810. * automatic adapation of touch positions with rotated displays (see also "Tablet PC settings" and "Pen and Touch" in the Windows control panel) Mouse Mode</> - This is the "classic" operating mode: all touch operations are handled by the system like mouse clicks. - After changing the display orientation (portrait, landscape) the touch screen must be calibrated. - Right-click does not work on all Windows user interface elements for example start menu entries, because "left mouse button down" is generated first when the touch is pressed and this leads already to an action. "Right mouse click" is generated after the specified time. ---------------------------------------------------------------- NOTE FOR CALIBRATION IN WINDOWS 7 TOUCH MODE ---------------------------------------------------------------- The Tablet PC calibration shows 16 calibration points at the first call or when the existing calibration was reset. This performs a system-wide calibration. All subsequent calibrations show only four calibration points and store the the calibration data per user. ---------------------------------------------------------------- NOTES FOR USE OF MULTIPLE TOUCH SCREENS AS EXTENDED DESKTOP ---------------------------------------------------------------- - When multiple touch screens are used as extended desktop the Microsoft Hotfix KB2618640 ("You cannot calibrate a second touch screen in Windows 7") is required to allow proper calibration in touch mode. You can download the hotfix from the Microsoft website: http://support.microsoft.com/kb/2618640 - When multiple touch screens are used as extended desktop in mouse mode touch input is only possible on the primary monitor. ---------------------------------------------------------------- LIMITATIONS ---------------------------------------------------------------- Beep on release is not supported on Windows 7. ---------------------------------------------------------------- Version 1.4.1 / 2016-12-12 / HOH ---------------------------------------------------------------- Error corrections - KB3033929 was not detected if KB3125574 was installed. The check has been replaced by a message box. |
|||||
Sürüm | Dil | İşletim sistemi | Tarih | Boyut | Tip | İndirme |
1.4 | DE | WinXP, WES2009, Win7/32bit, Win7/64bit, WES7, Windows8.1, Windows10 | 03/18/2016 | 11 MB | ZIP | B_R_Touch_Driver_V1_4.zip |
Açıklama |
Touch driver B&R (WinXP, Win7, Win8.1, Win10 32/64-bit) ---------------------------------------------------------------- GENERAL INFORMATION ---------------------------------------------------------------- The Touch driver supports serial touch screens on B&R devices. You can change and view settings of these touch screens with the touch screen applet in the Control Panel. This driver is recommended for B&R devices with Windows 7 and Windows Embedded Standard 7 or generally for Power Panel 500. ---------------------------------------------------------------- REQUIREMENTS ---------------------------------------------------------------- Supported operating systems: - Windows XP SP3 - Windows Embedded Standard 2009 - Windows 7 SP1 - Windows Embedded Standard 7 SP1 - Windows 8.1 - Windows 10 Supported serial touch controllers: - B&R (standard) - ELO (COACHII or compatible) You must have administrator rights for installation and to change touch settings! ---------------------------------------------------------------- INSTALLATION ---------------------------------------------------------------- To install this software: 1. Close all applications. 2. Start the setup .exe file (for example by double click in the Explorer). You can select the installation language, installation directory and start menu entry during installation. In addition you can specify on which serial ports a touch screen is connected and should be installed. Connected touch screen can also be detected and installed automatically. Depending on the used operating system and the system settings a message may be shown, that the driver is not WHQL certified. Confirm this message with "Install" (or Continue"). ---------------------------------------------------------------- LANGUAGE SUPPORT ---------------------------------------------------------------- The installed software contains german and english dialogs and text that are shown depending on display language selected in the Windows control panel (with region and language settings). ---------------------------------------------------------------- APPLICATION NOTES ---------------------------------------------------------------- The touch driver can be used in two operating modes: Touch Mode</> - This mode is only possible on systems with Tablet PC support like Windows 7 and Windows Embedded Standard 7 Premium. - Following touch features are supported by the system: * right-click over time * flicks * multiple touch screens in Extended Desktop mode Note: for that each touch screen must communicate over a separate serial port, for example COM3 and COM4 on APC810. * automatic adapation of touch positions with rotated displays (see also "Tablet PC settings" and "Pen and Touch" in the Windows control panel) Mouse Mode</> - This is the "classic" operating mode: all touch operations are handled by the system like mouse clicks. - After changing the display orientation (portrait, landscape) the touch screen must be calibrated. - Right-click does not work on all Windows user interface elements for example start menu entries, because "left mouse button down" is generated first when the touch is pressed and this leads already to an action. "Right mouse click" is generated after the specified time. ---------------------------------------------------------------- NOTE FOR CALIBRATION IN WINDOWS 7 TOUCH MODE ---------------------------------------------------------------- The Tablet PC calibration shows 16 calibration points at the first call or when the existing calibration was reset. This performs a system-wide calibration. All subsequent calibrations show only four calibration points and store the the calibration data per user. ---------------------------------------------------------------- NOTES FOR USE OF MULTIPLE TOUCH SCREENS AS EXTENDED DESKTOP ---------------------------------------------------------------- - When multiple touch screens are used as extended desktop the Microsoft Hotfix KB2618640 ("You cannot calibrate a second touch screen in Windows 7") is required to allow proper calibration in touch mode. You can download the hotfix from the Microsoft website: http://support.microsoft.com/kb/2618640 - When multiple touch screens are used as extended desktop in mouse mode touch input is only possible on the primary monitor. ---------------------------------------------------------------- LIMITATIONS ---------------------------------------------------------------- Beep on release is not supported on Windows 7. ---------------------------------------------------------------- Version 1.4 / 2016-02-10 / HOH ---------------------------------------------------------------- Updates - B&R certificate for 2015 - BrTouchSelect.exe V1.5 - BrTouchDrv.sys V1.2.2 Changes - Driver installation adapted for Windows 10. The touch driver is now installed as "COM port" instead "HMI" device under all Windows versions. - "Welcome" page removed. - Presence of KB3033929 is checked. Fixes - Handling of invalid touch controller messages improved. |
|||||
Sürüm | Dil | İşletim sistemi | Tarih | Boyut | Tip | İndirme |
1.3.1 | DE | WinXP, WinXPe, WinXP+SP2, WES2009, Win7/32bit, Win7/64bit, WES7 | 09/18/2014 | 11 MB | ZIP | B_R_Touch_Driver_V1_3_1.zip |
Açıklama |
Touch driver B&R (WinXP 32-bit, Win7 32/64-bit) ---------------------------------------------------------------- GENERAL INFORMATION ---------------------------------------------------------------- The Touch driver supports serial touch screens on B&R devices. You can change and view settings of these touch screens with the touch screen applet in the Control Panel. This driver is recommended for B&R devices with Windows 7 and Windows Embedded Standard 7 or generally for Power Panel 500. ---------------------------------------------------------------- REQUIREMENTS ---------------------------------------------------------------- Supported operating systems: - Windows 7 (32 and 64-bit) - Windows XP Professional - Windows XP Embedded - Windows Embedded Standard 7 (32 and 64-bit) - Windows Embedded Standard 2009 Supported serial touch controllers: - B&R (standard) - ELO (COACHII or compatible) You must have administrator rights for installation and to change touch settings! ---------------------------------------------------------------- INSTALLATION ---------------------------------------------------------------- To install this software: 1. Close all applications. 2. Start the setup .exe file (for example by double click in the Explorer). You can select the installation language, installation directory and start menu entry during installation. In addition you can specify on which serial ports a touch screen is connected and should be installed. Connected touch screen can also be detected and installed automatically. Depending on the used operating system and the system settings a message may be shown, that the driver is not WHQL certified. Confirm this message with "Install" (or Continue"). ---------------------------------------------------------------- LANGUAGE SUPPORT ---------------------------------------------------------------- The installed software contains german and english dialogs and text that are shown depending on display language selected in the Windows control panel (with region and language settings). ---------------------------------------------------------------- APPLICATION NOTES ---------------------------------------------------------------- The touch driver can be used in two operating modes: Touch Mode</> - This mode is only possible on systems with Tablet PC support like Windows 7 and Windows Embedded Standard 7 Premium. - Following touch features are supported by the system: * right-click over time * flicks * multiple touch screens in Extended Desktop mode Note: for that each touch screen must communicate over a separate serial port, for example COM3 and COM4 on APC810. * automatic adapation of touch positions with rotated displays (see also "Tablet PC settings" and "Pen and Touch" in the Windows control panel) Mouse Mode</> - This is the "classic" operating mode: all touch operations are handled by the system like mouse clicks. - After changing the display orientation (portrait, landscape) the touch screen must be calibrated. - Right-click does not work on all Windows user interface elements for example start menu entries, because "left mouse button down" is generated first when the touch is pressed and this leads already to an action. "Right mouse click" is generated after the specified time. ---------------------------------------------------------------- NOTE FOR CALIBRATION IN WINDOWS 7 TOUCH MODE ---------------------------------------------------------------- The Tablet PC calibration shows 16 calibration points at the first call or when the existing calibration was reset. This performs a system-wide calibration. All subsequent calibrations show only four calibration points and store the the calibration data per user. ---------------------------------------------------------------- NOTES FOR USE OF MULTIPLE TOUCH SCREENS AS EXTENDED DESKTOP ---------------------------------------------------------------- - When multiple touch screens are used as extended desktop the Microsoft Hotfix KB2618640 ("You cannot calibrate a second touch screen in Windows 7") is required to allow proper calibration in touch mode. You can download the hotfix from the Microsoft website: http://support.microsoft.com/kb/2618640 - When multiple touch screens are used as extended desktop in mouse mode touch input is only possible on the primary monitor. ---------------------------------------------------------------- LIMITATIONS ---------------------------------------------------------------- Beep on release is not supported on Windows 7. ---------------------------------------------------------------- Version 1.3.1 / 12-Aug-2014 ---------------------------------------------------------------- Components - Updated with BrTouchDrv.sys V1.2.1 - Updated with BrTouchSvc.exe V1.0.1 Fixes - When the touch screen was pressed during boot, no beep signals were emitted. - When a monitor was not connected to the PC before, touch clicks were disabled by the monitor off handling and worked only after a restart of Windows or the touch screen service. |
|||||
Sürüm | Dil | İşletim sistemi | Tarih | Boyut | Tip | İndirme |
1.3 | DE | WinXP, WinXPe, WinXP+SP2, WES2009, Win7/32bit, Win7/64bit, WES7 | 01/08/2013 | 11 MB | ZIP | B_R_Touch_Driver_V1_3.zip |
Açıklama |
Touch driver B&R (WinXP 32-bit, Win7 32/64-bit) ---------------------------------------------------------------- GENERAL INFORMATION ---------------------------------------------------------------- The Touch driver supports serial touch screens on B&R devices. You can change and view settings of these touch screens with the touch screen applet in the Control Panel. This driver is recommended for B&R devices with Windows 7 and Windows Embedded Standard 7 or generally for Power Panel 500. ---------------------------------------------------------------- REQUIREMENTS ---------------------------------------------------------------- Supported operating systems: - Windows 7 (32 and 64-bit) - Windows XP Professional - Windows XP Embedded - Windows Embedded Standard 7 (32 and 64-bit) - Windows Embedded Standard 2009 Supported serial touch controllers: - B&R (standard) - ELO (COACHII or compatible) You must have administrator rights for installation and to change touch settings! ---------------------------------------------------------------- INSTALLATION ---------------------------------------------------------------- To install this software: 1. Close all applications. 2. Start the setup .exe file (for example by double click in the Explorer). You can select the installation language, installation directory and start menu entry during installation. In addition you can specify on which serial ports a touch screen is connected and should be installed. Connected touch screen can also be detected and installed automatically. Depending on the used operating system and the system settings a message may be shown, that the driver is not WHQL certified. Confirm this message with "Install" (or Continue"). ---------------------------------------------------------------- LANGUAGE SUPPORT ---------------------------------------------------------------- The installed software contains german and english dialogs and text that are shown depending on display language selected in the Windows control panel (with region and language settings). ---------------------------------------------------------------- APPLICATION NOTES ---------------------------------------------------------------- The touch driver can be used in two operating modes: Touch Mode</> - This mode is only possible on systems with Tablet PC support like Windows 7 and Windows Embedded Standard 7 Premium. - Following touch features are supported by the system: * right-click over time * flicks * multiple touch screens in Extended Desktop mode Note: for that each touch screen must communicate over a separate serial port, for example COM3 and COM4 on APC810. * automatic adapation of touch positions with rotated displays (see also "Tablet PC settings" and "Pen and Touch" in the Windows control panel) Mouse Mode</> - This is the "classic" operating mode: all touch operations are handled by the system like mouse clicks. - After changing the display orientation (portrait, landscape) the touch screen must be calibrated. - Right-click does not work on all Windows user interface elements for example start menu entries, because "left mouse button down" is generated first when the touch is pressed and this leads already to an action. "Right mouse click" is generated after the specified time. ---------------------------------------------------------------- NOTE FOR CALIBRATION IN WINDOWS 7 TOUCH MODE ---------------------------------------------------------------- The Tablet PC calibration shows 16 calibration points at the first call or when the existing calibration was reset. This performs a system-wide calibration. All subsequent calibrations show only four calibration points and store the the calibration data per user. ---------------------------------------------------------------- NOTES FOR USE OF MULTIPLE TOUCH SCREENS AS EXTENDED DESKTOP ---------------------------------------------------------------- - When multiple touch screens are used as extended desktop the Microsoft Hotfix KB2618640 ("You cannot calibrate a second touch screen in Windows 7") is required to allow proper calibration in touch mode. You can download the hotfix from the Microsoft website: http://support.microsoft.com/kb/2618640 - When multiple touch screens are used as extended desktop in mouse mode touch input is only possible on the primary monitor. ---------------------------------------------------------------- LIMITATIONS ---------------------------------------------------------------- Beep on release is not supported on Windows 7. ---------------------------------------------------------------- Version 1.3 / 18-Jul-2012 ---------------------------------------------------------------- Components</> - Updated with BrTouchApplet.cpl V1.4 - Updated with BrTouchCalib.exe V1.2.1 - Updated with BrTouchSelect.exe V1.4 - Updated help: note for monitor change at "Monitor Off" feature. Fixes</> - When an already existing version was removed, an eventually required restart of the system was suppressed. - The required disk space for installation was shown with about 1.9 MB, although 15 MB were installed. -> technical related to setup and no longer displayed - At silent installation message boxes could have been displayed at touch select/assignment. - Windows Touch settings were disabled in the applet, when the Tablet PC Input Service was not started. By that sometimes changing from mouse mode to touch mode was not possible. - After cancelling the calibration twice the status was shown as "calibrated" in the applet. Changes</> - Setup now supports the Windows 7 Restart Manager API to close and restart applications using files that need to be updated. - After installation with Windows 7 Touch Mode a restart is no longer forced. - Touch select/assignment at setup is now logged in \Windows\TouchInst.log. - When Touch Mode is selected in the applet the Tablet PC InputService is restarted (when a touch device is present). - The applet shows a red info text, when touch mode is selected but no Tablet PC support exists (that means no touch input is possible): "Touch input is not possible: The Tablet PC Input service is not started or there is no touch screen connected." On Windows XP or WES2009 this text is shown always: "This option is only available on systems with Tablet PC functionality such as Windows 7." Remark: In rare cases it could happen, that a valid Tablet PC support is detected (ie. the Tablet PC Input Service is started), but touch input doesn't work -> this is caused by the system and can not be recognized; the system must be rebooted. - After installation of a touch device via the GUI the Tablet PC Input Service is restarted. |
|||||
Sürüm | Dil | İşletim sistemi | Tarih | Boyut | Tip | İndirme |
1.2 | DE | WinXP, WinXPe, WinXP+SP2, WES2009, Win7/32bit, Win7/64bit, WES7 | 11/30/2011 | 11 MB | ZIP | B_R_Touch_Driver_V1_2.zip |
Açıklama |
Touch driver B&R (WinXP 32-bit, Win7 32/64-bit) ---------------------------------------------------------------- GENERAL INFORMATION ---------------------------------------------------------------- The Touch driver supports serial touch screens on B&R devices. You can change and view settings of these touch screens with the touch screen applet in the Control Panel. This driver is recommended for B&R devices with Windows 7 and Windows Embedded Standard 7 or generally for Power Panel 500. ---------------------------------------------------------------- REQUIREMENTS ---------------------------------------------------------------- Supported operating systems: - Windows 7 (32 and 64-bit) - Windows XP Professional - Windows XP Embedded - Windows Embedded Standard 7 (32 and 64-bit) - Windows Embedded Standard 2009 Supported serial touch controllers: - B&R (standard) - ELO (COACHII or compatible) You must have administrator rights for installation and to change touch settings! ---------------------------------------------------------------- INSTALLATION ---------------------------------------------------------------- To install this software: 1. Close all applications. 2. Start the setup .exe file (for example by double click in the Explorer). You can select the installation language, installation directory and start menu entry during installation. In addition you can specify on which serial ports a touch screen is connected and should be installed. Connected touch screen can also be detected and installed automatically. Depending on the used operating system and the system settings a message may be shown, that the driver is not WHQL certified. Confirm this message with "Install" (or Continue"). ---------------------------------------------------------------- LANGUAGE SUPPORT ---------------------------------------------------------------- The installed software contains german and english dialogs and text that are shown depending on display language selected in the Windows control panel (with region and language settings). ---------------------------------------------------------------- APPLICATION NOTES ---------------------------------------------------------------- The touch driver can be used in two operating modes: Touch Mode</> - This mode is only possible on systems with Tablet PC support like Windows 7 and Windows Embedded Standard 7 Premium. - Following touch features are supported by the system: * right-click over time * flicks * multiple touch screens in Extended Desktop mode Note: for that each touch screen must communicate over a separate serial port, for example COM3 and COM4 on APC810. * automatic adapation of touch positions with rotated displays (see also "Tablet PC settings" and "Pen and Touch" in the Windows control panel) Mouse Mode</> - This is the "classic" operating mode: all touch operations are handled by the system like mouse clicks. - After changing the display orientation (portrait, landscape) the touch screen must be calibrated. - Right-click does not work on all Windows user interface elements for example start menu entries, because "left mouse button down" is generated first when the touch is pressed and this leads already to an action. "Right mouse click" is generated after the specified time. ---------------------------------------------------------------- NOTE FOR CALIBRATION IN WINDOWS 7 TOUCH MODE ---------------------------------------------------------------- The Tablet PC calibration shows 16 calibration points at the first call or when the existing calibration was reset. This performs a system-wide calibration. All subsequent calibrations show only four calibration points and store the the calibration data per user. ---------------------------------------------------------------- NOTES FOR USE OF MULTIPLE TOUCH SCREENS AS EXTENDED DESKTOP ---------------------------------------------------------------- - When multiple touch screens are used as extended desktop the Microsoft Hotfix KB2618640 ("You cannot calibrate a second touch screen in Windows 7") is required to allow proper calibration in touch mode. You can download the hotfix from the Microsoft website: http://support.microsoft.com/kb/2618640 - When multiple touch screens are used as extended desktop in mouse mode touch input is only possible on the primary monitor. ---------------------------------------------------------------- LIMITATIONS ---------------------------------------------------------------- Beep on release is not supported on Windows 7. ---------------------------------------------------------------- Version 1.2 / 02-Nov-2011 ---------------------------------------------------------------- Fixes</> - The Touch Screen Control Panel item was not shown on Windows Embedded Standard 7 in the Category View (under Hardware and Sound). - The double-click area was not set properly for touch input when a new user was logged on. - After clicking "Select" on the "Hardware" tab, the applet did not react (no window update) until the Touch Select program was terminated. - A COM port with connected loopback adapter was detected as touch device. Changes</> - An already installed touch driver version can be removed by the setup. - New: BrTouchSvc.exe 1.0: Performs the monitor-off handling. - New: BrTouchInit.exe 1.0: Changes the mouse parameters for double-click via touch. - Updated with BrTouchDrv.sys 1.2: New Ioctl's for click and touch enable/disable. - Updated with BrTouchApplet.cpl 1.3: The "calibrated" status on the "Hardware" tab is now updated each time when the tab is selected. New: Calibration "Reset" button on the "Hardware" tab. The applet can be called with a specified start page (index 0 to x): "control.exe brtouchapplet.cpl<(> <)>3" shows the 4th tab. - Updated with BrTouchSelect.exe 1.3: The request is sent again, when it is received as response during auto-detect. - New: BrTouchApplet.exe 1.0: Wrapper for BrTouchApplet.cpl call (required for Control Panel tasks). - New: Windows 7 Control Panel tasks for touch screen. - New: Touch Right-Click utility is installed. - New: setup task for opening the Touch Screen Control Panel item. - New: License agreement is shown at setup. - The actual B&R certificate is installed in the silent mode. |
|||||
Sürüm | Dil | İşletim sistemi | Tarih | Boyut | Tip | İndirme |
1.1.1 | DE | WinXP, WinXPe, WinXP+SP2, WES2009, Win7/32bit, Win7/64bit, WES7 | 08/02/2011 | 7 MB | EXE | TouchDriverSetup.exe |
Açıklama |
Touch driver B&R (WinXP 32-bit, Win7 32/64-bit) ---------------------------------------------------------------- GENERAL INFORMATION ---------------------------------------------------------------- The Touch driver supports serial touch screens on B&R devices. You can change and view settings of these touch screens with the touch screen applet in the Control Panel. This driver is recommended for B&R devices with Windows 7 and Windows Embedded Standard 7 or generally for Power Panel 500. ---------------------------------------------------------------- REQUIREMENTS ---------------------------------------------------------------- Supported operating systems: - Windows XP Professional - Windows XP Embedded - Windows Embedded Standard 2009 - Windows 7 (32 und 64-bit) - Windows Embedded Standard 7 (32 and 64-bit) Supported serial touch controllers: - ELO (COACHII oder kompatibel) - B&R You must have administrator rights for installation and to change touch settings! ---------------------------------------------------------------- INSTALLATION ---------------------------------------------------------------- To install this software: 1. Close all applications. 2. Start the setup .exe file (for example by double click in the Explorer). You can select the installation language, installation directory and start menu entry during installation. In addition you can specify on which serial ports a touch screen is connected and should be installed. Connected touch screen can also be detected and installed automatically. Depending on the used operating system and the system settings a message may be shown, that the driver is not WHQL certified. Confirm this message with "Install" (or Continue"). ---------------------------------------------------------------- LANGUAGE SUPPORT ---------------------------------------------------------------- The installed software contains german and english dialogs and text that are shown depending on display language selected in the Windows control panel (with region and language settings). ---------------------------------------------------------------- APPLICATION NOTES ---------------------------------------------------------------- The touch driver can be used in two operating modes: Mouse mode - This is the "classic" operating mode: all touch operations are handled by the system as mouse inputs. - After changing the display orientation (portrait, landscape) the touch screen must be calibrated. - Right-click does not work on all Windows user interface elements for example start menu entries, because "left mouse button down" is generated first when the touch is pressed and this leads already to an action. "Right mouse click" is generated after the specified time. Touch mode - This mode is only possible on systems with Tablet PC support like Windows 7. - Following touch features are supported by the system: * right-click over time * flicks * multiple touch screens in Extended Desktop mode Note: for that each touch screen must communicate over a separate serial port, for example COM3 and COM4 on APC810. * automatic adapation of touch positions with rotated displays (see also "Tablet PC settings" and "Pen and Touch" in the Windows control panel) ---------------------------------------------------------------- LIMITATIONS ---------------------------------------------------------------- - When the driver is used the mouse mode and multiple monitors are used in extended desktop mode touch input is only possible on the primary monitor. - Beep on untouch is not supported on Windows 7. |
|||||
Sürüm | Dil | İşletim sistemi | Tarih | Boyut | Tip | İndirme |
1.1 | DE | WinXP, WinXPe, WinXP+SP2, WES2009, Win7/32bit, Win7/64bit, WES7 | 08/22/2011 | 7 MB | EXE | TouchDriverSetup.exe |
Açıklama |
Touch driver B&R (WinXP 32-bit, Win7 32/64-bit) ---------------------------------------------------------------- GENERAL INFORMATION ---------------------------------------------------------------- The Touch driver supports serial touch screens on B&R devices. You can change and view settings of these touch screens with the touch screen applet in the Control Panel. This driver is recommended for B&R devices with Windows 7 and Windows Embedded Standard 7 or generally for Power Panel 500. ---------------------------------------------------------------- REQUIREMENTS ---------------------------------------------------------------- Supported operating systems: - Windows XP Professional - Windows XP Embedded - Windows Embedded Standard 2009 - Windows 7 (32 und 64-bit) - Windows Embedded Standard 7 (32 and 64-bit) Supported serial touch controllers: - ELO (COACHII oder kompatibel) - B&R You must have administrator rights for installation and to change touch settings! ---------------------------------------------------------------- INSTALLATION ---------------------------------------------------------------- To install this software: 1. Close all applications. 2. Start the setup .exe file (for example by double click in the Explorer). You can select the installation language, installation directory and start menu entry during installation. In addition you can specify on which serial ports a touch screen is connected and should be installed. Connected touch screen can also be detected and installed automatically. Depending on the used operating system and the system settings a message may be shown, that the driver is not WHQL certified. Confirm this message with "Install" (or Continue"). ---------------------------------------------------------------- LANGUAGE SUPPORT ---------------------------------------------------------------- The installed software contains german and english dialogs and text that are shown depending on display language selected in the Windows control panel (with region and language settings). ---------------------------------------------------------------- APPLICATION NOTES ---------------------------------------------------------------- The touch driver can be used in two operating modes: Mouse mode - This is the "classic" operating mode: all touch operations are handled by the system as mouse inputs. - After changing the display orientation (portrait, landscape) the touch screen must be calibrated. - Right-click does not work on all Windows user interface elements for example start menu entries, because "left mouse button down" is generated first when the touch is pressed and this leads already to an action. "Right mouse click" is generated after the specified time. Touch mode - This mode is only possible on systems with Tablet PC support like Windows 7. - Following touch features are supported by the system: * right-click over time * flicks * multiple touch screens in Extended Desktop mode Note: for that each touch screen must communicate over a separate serial port, for example COM3 and COM4 on APC810. * automatic adapation of touch positions with rotated displays (see also "Tablet PC settings" and "Pen and Touch" in the Windows control panel) ---------------------------------------------------------------- LIMITATIONS ---------------------------------------------------------------- - When the driver is used the mouse mode and multiple monitors are used in extended desktop mode touch input is only possible on the primary monitor. - Beep on untouch is not supported on Windows 7. |