The Power Panel C70 controller is equipped with a 333 MHz Intel Atom CPU, 256 MB DDRAM, 16 kB FRAM and 2 GB onboard flash drive. The controller with a built-in touch screen is available in three display sizes. The Power Panel C70 achieves cycle times as fast as 1 ms. POWERLINK and standard Ethernet, 2x USB 2.0 interfaces meet all connection requirements.
General information
Figure |
System features |
---|---|
![]() |
|
Order data
Order data
Model number |
Short description |
---|---|
ETAL610.1C07-1 |
C-Series 7" process visualization |
Required accessories
Required accessories
Model number / reference |
Short description |
---|---|
Base plate for installing up to two ETA light systems |
|
Desktop power supply 24 VDC, 2.5 A |
|
POWERLINK connection cable for connecting a PC with Automation Studio to the X20 controller or for connecting two ETA light systems |
Included in delivery
Included in delivery
Model number |
Short description |
---|---|
4PPC70.0702-20W |
Power Panel C70, 7", analog resistive touch screen, Intel ATOM 333 MHz comp., 256 MB DDRAM |
- |
The system is delivered as shown in the image with a pre-configured power supply cable for connecting to the female connector of the desktop power supply (0TP650.07). The system can therefore be put into operation immediately after the supply voltage is connected. The item listed under the "Required accessories" category is not included in the content of delivery and must be ordered separately. All terminal blocks are included in the delivery. The model numbers can also be found in the respective data sheet. |