General information
| Certifications | |
| CE | Yes |
Motor
| Nominal speed nN [rpm] | 4500 |
| Number of pole pairs | 5 |
| Nominal torque Mn [Nm] | 2.800 |
| Nominal power PN [W] | 1319 |
| Nominal current IN [A] | 2.890 |
| Stall torque M0 [Nm] | 3.200 |
| Stall current I0 [A] | 3.300 |
| Maximum torque Mmax [Nm] | 11.30 |
| Maximum current Imax [A] | 15.00 |
| Maximum speed nmax [rpm] | 7000 |
| Torque constant KT [Nm/A] | 0.970 |
| Voltage constant KE [V/1000 rpm] | 58.64 |
| Stator resistance R2ph [Ω] | 5.300 |
| Stator inductance L2ph [mH] | 12.40000 |
| Electrical time constant tel [ms] | 2.340 |
| Thermal time constant ttherm [min] | 38.0 |
| Moment of inertia J [kgcm2] | 1.1000 |
| Weight without brake m [kg] | 3.80 |
Holding brake
| Holding torque of brake MBr [Nm] | 3.20 |
| Mass of brake [kg] | 0.60 |
| Moment of inertia of brake JBr [kgcm2] | 0.3800 |
Recommendations
| ACOPOS 8Vxxxx.xx... | 1045 |
| ACOPOSmulti 8BVIxxxx... | 0028 |
| ACOPOS P3 8EIxxxx... | 4X5X |
| Cross section for B&R motor cables [mm2] | 0.7500 |
| Connector size | 1.0 |
Options
| Connection type | Single-cable solution |
| Connection direction | Swivel, SCS |
| Encoder | D9 2.2 inductive multi-turn |
| Shaft end | Key |
Materialnummer:
8LSAA4.D9045S300-3Beskrivning:
Synchronous motor, number of pole pairs: 5 pairs, nominal speed: 4500 rpm stall torque: 3.200 Nm, motor with holding brake, shaft key single-cable solution (swivel), single-cable solution, centering diameter 60 mm j6 fit (self-cooling, construction type A), without oil seal, 560 VDC brake holding torque: 3.20 Nm, D9 2.2 ind. multi-turn.
| DT Upgrade | Version (datum) | Nedladdning |
|---|---|---|
| V4.0 DT Upgrade (8LSAA4.D9045S300-3) | EXE / 299 KB |
