Short description
Stepper motor Stepper motor flange size 87.1 mm, length 130 mm
General information
Certifications
CE Yes
Specific motor data
Wiring
Serial True
Parallel True
Current
Series wiring 3 A
Parallel wiring 6 A
Resistance/Phase
Series wiring 2.7 Ω
Parallel wiring 0.7 Ω
Inductance/Phase
Series wiring 20.0 mH
Parallel wiring 5.0 mH
Stall torque 9.3 Nm
Holding torque 13.6 Nm
Detent torque <420 mNm
Rotor inertia Approx. 3.92 kgcm2
General motor data
Protection class IP40
Stepping angle 1.8°
Max. surface temperature 100°C
Average period of operation between failures 20,000 hours
Cable length 300 mm
Cable cross section AWG 22, UL3266
Shaft type Keyed
Insulation class B (130°C)
Insulation resistance 100 MΩ min. 500 VDC
Dielectric resistance 1776 VAC for 1 minute
Driver supply voltage Max. 80 VDC
Ambient conditions
Temperature
Operation -20 to 40°C
Storage -30 to 85°C
Transport -30 to 85°C
Relative humidity
Operation 5 to 95%, non-condensing
Storage 5 to 95%, non-condensing
Transport 5 to 95%, non-condensing
Mechanical properties
Max. radial load 290 N
Max. axial load 225 N
Weight 4.2 kg
Length 130 mm
Materialnummer:
80MPH6.300S000-01
Beskrivning:
2-phase hybrid stepper motor, 87.1 mm flange, length 130 mm, 3 A series / 6 A parallel, 13.6 Nm holding torque, 9.3 Nm stall torque
Extra tillbehör
Accessories
80XMPHXRE.W1-10 IP upgrade kit with cable clamp for stepper motors from the 80MPH series, IP65, 10 units per package
Certificates Version (datum) Nedladdning
E360421 UL Certificate of Compliance 80MPH PDF / 243 KB
EU Declaration Motors Hybrid PDF / 301 KB
Dokumentation Version (datum) Nedladdning
Stepper motors user's manual PDF / 15 MB

Vänligen välj ditt land och språk

B&R Logo

Please choose country

B&R Logo

Please choose country

B&R Logo