Short description
I/O module 6 digital inputs 100 to 120 VAC for 1-wire connections
General information
B&R ID code 0x256F
Status indicators I/O function per channel, operating state, module status
Diagnostics
Module run/error Yes, using LED status indicator and software
External I/O power supply Yes, using software (typ. threshold 85 VAC)
Power consumption
Bus 0.21 W
Internal I/O -
External I/O 0.68 W
Additional power dissipation caused by actuators (resistive) [W] -
Certifications
CE Yes
UKCA Yes
ATEX Zone 2, II 3G Ex nA nC IIA T5 Gc
IP20, Ta (see X20 user's manual)
FTZÚ 09 ATEX 0083X
UL cULus E115267
Industrial control equipment
HazLoc cCSAus 244665
Process control equipment
for hazardous locations
Class I, Division 2, Groups ABCD, T5
EAC Yes
KC Yes
Digital inputs
Nominal voltage 100 to 120 VAC
Input filter
Software Default 1 ms, configurable between 0 and 25 ms in 0.2 ms increments
Hardware
1 → 0 ≤30 ms
0 → 1 ≤15 ms
Connection type 1-wire connections
Rated frequency 47 to 63 Hz
Switching threshold
Low <20 VAC
High >79 VAC
Insulation voltage between channel and bus 1 minute 1500 VAC
Input voltage
Maximum 132 VAC
Input current
120 VAC / 50 Hz 8.5 mA
120 VAC / 60 Hz 10 mA
Sensor power supply
Voltage Corresponds to the module power supply
Short-circuit proof No
Electrical properties
Electrical isolation Channel isolated from bus
Channel not isolated from channel
Operating conditions
Mounting orientation
Horizontal Yes
Vertical Yes
Installation elevation above sea level
0 to 2000 m No limitation
>2000 m Reduction of ambient temperature by 0.5°C per 100 m
Degree of protection per EN 60529 IP20
Ambient conditions
Temperature
Operation
Horizontal mounting orientation -25 to 60°C
Vertical mounting orientation -25 to 50°C
Derating -
Storage -40 to 85°C
Transport -40 to 85°C
Relative humidity
Operation 5 to 95%, non-condensing
Storage 5 to 95%, non-condensing
Transport 5 to 95%, non-condensing
Mechanical properties
Note Order 1x terminal block X20TB32 separately.
Order 1x bus module X20BM12 separately.
Pitch 12.5+0.2 mm
Materialnummer:
X20DI6553
Beskrivning:
  • 6 digital inputs
  • 100 to 120 VAC inputs
  • 50 Hz or 60 Hz
  • 1-wire connections
  • 240 V coded

The module is equipped with 6 inputs for 1-wire connections. It is designed for an input voltage of 100 to 120 VAC.

Obligatoriska tillbehör
Bus modules
X20BM12 X20 bus module, 240 VAC keyed, internal I/O power supply connected through
Terminal blocks
X20TB32 X20 terminal block, 12-pin, 240 VAC keyed
Automation Studio HW Upgrades Version (datum) Nedladdning
V2.6 HW Upgrade (X20DI6553) EXE / 811 KB
V2.6 HW Upgrade (X20DI6553) EXE / 831 KB
V3.0 HW Upgrade (X20DI6553) EXE / 1 MB
V3.0 HW Upgrade (X20DI6553) EXE / 1 MB
V4.0 HW Upgrade (X20DI6553) EXE / 573 KB
Certificates Version (datum) Nedladdning
244665 CSA HazLoc Certificate of Compliance X20, X67 PDF / 56 KB
E115267 UL CoC X20 PDF / 100 KB
FTZU 09 ATEX 0083X PDF / 771 KB
X20, X67 KC certificates PDF / 6 MB
Dokumentation Version (datum) Nedladdning
Data sheet X20DI6553 PDF / 371 KB
X20 System User´s Manual PDF / 6 MB
E-CAD (Electro or EPLAN Templates) Version (datum) Nedladdning
X20 EPLAN P8 from V2.4 EXE / 177 MB
M-CAD (Mechan. Templates) Version (datum) Nedladdning
3D File DXF/STEP X20 Electronic module ZIP / 10 KB
3D File STEP X20 I/O-Slice ZIP / 872 KB
Dimensions PDF X20 Electronic module PDF / 3 KB

Vänligen välj ditt land och språk

B&R Logo

Please choose country

B&R Logo

Please choose country

B&R Logo