DWL@DWL10000403024
| Версия | Язык | Операционная система | Дата | Размер | Тип | Загрузка |
|---|---|---|---|---|---|---|
| 1.6.0.0 | * | 30.07.2025 | 946 кБ | EXE | AS4_HW_X20PS3300.exe | |
| Описание |
V4.0 HW Upgrade (X20PS3300) Revision information X20PS3300 Version 1.6.0.0: ID: TDYD-8923 The current limit values have been standardized on the HW variants. The warning LED is activated from 1.5 A. From 2.3 A, the error bit and the error LED are set. Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\7104_1.fw(530), 1\7104_2.fw(530), 1\7104_21.fw(241), 1\7104_22.fw(241), 1\7104_5.fw(768), 1\7104_6.fw(816) Version 1.5.0.0: ID: TDYD-7552 Incorrectly configured modules were not identified on the X2X bus in certain circumstances. A dynamic hardware configuration is used for various customer applications.In this case, a default configuration is simply created in AS and the actual configuration is read out after the system has started up. Due to a hardware change of several I/O modules, only a cyclic size of 12 bytes (previously 31 bytes) is accepted in the bootloader. If a module with more cyclic data (e.g. a safety module) is now configured, this module can no longer be identified on the bus. As a workaround, these "large" modules can be configured on other X2X slots. This problem can only be corrected with a new bootloader, which can only be delivered via production. Production will be switched to the new softwareaccordingly. Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\7104_1.fw(530), 1\7104_2.fw(530), 1\7104_21.fw(210), 1\7104_22.fw(240), 1\7104_5.fw(768), 1\7104_6.fw(816) Version 1.4.0.0: ID: 740435 Support new HW variant 21 Channel descriptionchanged: No Configuration description changed: No Firmware changed:Yes ID: 743315 Module documentation revised Data sheet V 3.17 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\7104_1.fw(530), 1\7104_2.fw(530), 1\7104_21.fw(210), 1\7104_5.fw(768), 1\7104_6.fw(816) Version 1.3.0.0: ID: Adaptations for Automation Studio 4.11 Channel description changed: no Configuration description changed: yes Firmware changed: no Version 1.2.0.0: ID: Adaptations for Automation Studio 4.8 Channel description changed: no Configuration description changed: yes Firmware changed: no Version 1.1.0.0: ID: 464150 General adaptions in hardware files Adaptions to maintain hardwarefiles of X20 and X20c modules more easily Channel description changed: Yes Configuration description changed: Yes Firmware changed:No ID: 464160 Currently produced Firmware added Firmware for HW variant 6 published in AS Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\7104_1.fw(530), 1\7104_2.fw(530), 1\7104_5.fw(768), 1\7104_6.fw(816) Version 1.0.3.0: ID: 459435 Adaption for AS4 - AutoConnect changed to X20BM01 - Accessory X20BM05 added to documentation Channel description changed: No Configuration description changed: No Firmwarechanged: No Firmware: 1\7104_1.fw(530), 1\7104_2.fw(530), 1\7104_5.fw(768), 1\7104_6.fw(784) Version 1.0.2.0: ID: 260545 Error correction in channel description Adverse settings in the AS I/O configuration may cause an error on X2X Channel description changed: Yes Configuration description changed: No Firmware changed: No Firmware: 1\7104_1.fw(530), 1\7104_2.fw(530), 1\7104_5.fw(768), 1\7104_6.fw(784) Version 1.0.1.0: ID: 227870 Extension in IO-Mapping for SG3 CanIO Datapoints for Bus current and Bus voltage added Channel description changed: Yes Configuration description changed: No Firmware changed: No Firmware: 1\7104_1.fw(530), 1\7104_2.fw(530), 1\7104_5.fw(768), 1\7104_6.fw(784) |
|||||
| Версия | Язык | Операционная система | Дата | Размер | Тип | Загрузка |
| 1.5.0.0 | * | 20.01.2025 | 917 кБ | EXE | AS4_HW_X20PS3300.exe | |
| Описание |
V4.0 HW Upgrade (X20PS3300) Revision information X20PS3300 Version 1.5.0.0: ID: TDYD-7552 Incorrectly configured modules were not identified on the X2X bus in certain circumstances. A dynamic hardwareconfiguration is used for various customer applications. In this case, a default configuration is simply created in AS and the actual configuration is readout after the system has started up. Due to a hardware change of several I/O modules, only a cyclic size of 12 bytes (previously 31 bytes) is accepted in the bootloader. If a module with more cyclic data (e.g. a safety module) is nowconfigured, this module can no longer be identified on the bus. As a workaround, these "large" modules can be configured on other X2X slots. This problem can only be corrected with a new bootloader, which can only be delivered via production. Production will be switched to the new software accordingly. Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\7104_1.fw(530), 1\7104_2.fw(530), 1\7104_21.fw(210), 1\7104_22.fw(240), 1\7104_5.fw(768), 1\7104_6.fw(816) Version 1.4.0.0: ID: 740435 Support new HW variant 21 Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 743315 Module documentation revised Data sheet V 3.17 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\7104_1.fw(530), 1\7104_2.fw(530), 1\7104_21.fw(210), 1\7104_5.fw(768), 1\7104_6.fw(816) Version 1.3.0.0: ID: Adaptations for Automation Studio 4.11 Channel description changed: no Configuration description changed: yes Firmware changed: no Version 1.2.0.0: ID: Adaptations for Automation Studio 4.8 Channel description changed: no Configuration description changed: yes Firmware changed: no Version 1.1.0.0: ID: 464150 General adaptions in hardware files Adaptionsto maintain hardwarefiles of X20 and X20c modules more easily Channel description changed: Yes Configuration description changed: Yes Firmware changed: No ID: 464160 Currently produced Firmware added Firmware for HW variant 6 published in AS Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\7104_1.fw(530), 1\7104_2.fw(530), 1\7104_5.fw(768), 1\7104_6.fw(816) Version 1.0.3.0: ID: 459435 Adaption for AS4 - AutoConnect changed to X20BM01 - Accessory X20BM05 added to documentation Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\7104_1.fw(530), 1\7104_2.fw(530), 1\7104_5.fw(768), 1\7104_6.fw(784) Version 1.0.2.0: ID: 260545 Error correction in channel description Adverse settings in the AS I/Oconfiguration may cause an error on X2X Channel description changed: Yes Configuration description changed: No Firmware changed: No Firmware: 1\7104_1.fw(530), 1\7104_2.fw(530), 1\7104_5.fw(768), 1\7104_6.fw(784) Version 1.0.1.0: ID: 227870 Extension in IO-Mapping for SG3 CanIO Datapoints for Bus current and Bus voltage added Channel description changed: Yes Configuration description changed: No Firmware changed: No Firmware: 1\7104_1.fw(530), 1\7104_2.fw(530), 1\7104_5.fw(768), 1\7104_6.fw(784) |
|||||
| Версия | Язык | Операционная система | Дата | Размер | Тип | Загрузка |
| 1.4.0.0 | * | 20.01.2022 | 712 кБ | EXE | AS4_HW_X20PS3300.exe | |
| Описание |
V4.0 HW Upgrade (X20PS3300) Revision information X20PS3300 Version 1.4.0.0: ID: 740435 Support new HW variant 21 Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 743315 Module documentation revised Datasheet V 3.17 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\7104_1.fw(530), 1\7104_2.fw(530), 1\7104_21.fw(210), 1\7104_5.fw(768), 1\7104_6.fw(816) Version 1.3.0.0: ID: Adaptations for Automation Studio 4.11 Channel description changed: no Configuration description changed: yes Firmware changed: no Version 1.2.0.0: ID: Adaptationsfor Automation Studio 4.8 Channel description changed: no Configuration description changed: yes Firmware changed: no Version 1.1.0.0: ID: 464150 General adaptions in hardware files Adaptions to maintain hardwarefiles of X20 and X20c modules more easily Channel description changed: Yes Configuration description changed: Yes Firmware changed: No ID: 464160 Currently produced Firmware added Firmware for HW variant 6 published in AS Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\7104_1.fw(530), 1\7104_2.fw(530), 1\7104_5.fw(768), 1\7104_6.fw(816) Version 1.0.3.0: ID: 459435 Adaption for AS4 - AutoConnect changed to X20BM01 - Accessory X20BM05 added to documentation Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\7104_1.fw(530), 1\7104_2.fw(530), 1\7104_5.fw(768), 1\7104_6.fw(784) Version 1.0.2.0: ID: 260545 / Support ID: 400061307 Error correction in channel description Adversesettings in the AS I/O configuration may cause an error on X2X Channel description changed: Yes Configuration description changed: No Firmware changed: No Firmware: 1\7104_1.fw(530), 1\7104_2.fw(530), 1\7104_5.fw(768), 1\7104_6.fw(784) Version 1.0.1.0: ID: 227870 Extension in IO-Mapping for SG3 CanIO Datapoints for Bus current and Bus voltage added Channel description changed: Yes Configuration description changed: No Firmware changed: No Firmware: 1\7104_1.fw(530), 1\7104_2.fw(530), 1\7104_5.fw(768), 1\7104_6.fw(784) |
|||||
| Версия | Язык | Операционная система | Дата | Размер | Тип | Загрузка |
| 1.3.0.0 | * | 23.07.2021 | 622 кБ | EXE | AS4_HW_X20PS3300.exe | |
| Описание |
V4.0 HW Upgrade (X20PS3300) Revision information X20PS3300 Version 1.3.0.0: ID: Adaptations for Automation Studio 4.11 Channel description changed: no Configuration description changed: yes Firmware changed: no Version 1.2.0.0: ID: Adaptations for Automation Studio 4.8 Channel description changed: no Configuration description changed: yes Firmware changed: no Version 1.1.0.0: ID: 464150 General adaptions in hardware files Adaptions tomaintain hardwarefiles of X20 and X20c modules more easily Channel description changed: Yes Configuration description changed: Yes Firmware changed: No ID: 464160 Currently produced Firmware added Firmware for HW variant 6 published in AS Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\7104_1.fw(530), 1\7104_2.fw(530), 1\7104_5.fw(768), 1\7104_6.fw(816) Version 1.0.3.0: ID: 459435 Adaption for AS4 - AutoConnect changed to X20BM01 - Accessory X20BM05 added to documentation Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\7104_1.fw(530), 1\7104_2.fw(530), 1\7104_5.fw(768), 1\7104_6.fw(784) Version 1.0.2.0: ID: 260545 / Support ID: 400061307 Error correction in channel description Adverse settings in the AS I/O configuration may cause an error on X2X Channel description changed: Yes Configuration description changed: No Firmwarechanged: No Firmware: 1\7104_1.fw(530), 1\7104_2.fw(530), 1\7104_5.fw(768), 1\7104_6.fw(784) Version 1.0.1.0: ID: 227870 Extension in IO-Mapping for SG3 CanIO Datapoints for Bus current and Bus voltage added Channel description changed: Yes Configuration description changed: No Firmware changed: No Firmware: 1\7104_1.fw(530), 1\7104_2.fw(530), 1\7104_5.fw(768), 1\7104_6.fw(784) |
|||||
| Версия | Язык | Операционная система | Дата | Размер | Тип | Загрузка |
| 1.2.0.0 | * | 25.10.2019 | 616 кБ | EXE | AS4_HW_X20PS3300.exe | |
| Описание |
V4.0 HW Upgrade (X20PS3300) Revision information X20PS3300 Version 1.2.0.0: ID: Adaptations for Automation Studio 4.8 Channel description changed: no Configuration description changed: yes Firmware changed: no Version 1.1.0.0: ID: 464150 General adaptions in hardware files Adaptions to maintain hardwarefiles of X20 and X20c modules more easily Channel description changed: Yes Configuration description changed: Yes Firmware changed: No ID: 464160 Currently produced Firmware added Firmware for HW variant 6 publishedin AS Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\7104_1.fw(530), 1\7104_2.fw(530), 1\7104_5.fw(768), 1\7104_6.fw(816) Version 1.0.3.0: ID: 459435 Adaption for AS4 - AutoConnect changed to X20BM01 - Accessory X20BM05 added to documentation Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\7104_1.fw(530), 1\7104_2.fw(530), 1\7104_5.fw(768), 1\7104_6.fw(784) Version 1.0.2.0: ID: 260545 / Support ID: 400061307 Error correction in channel description Adverse settings in the AS I/O configuration may cause an error on X2X Channel description changed: Yes Configuration description changed: No Firmware changed: No Firmware: 1\7104_1.fw(530), 1\7104_2.fw(530), 1\7104_5.fw(768), 1\7104_6.fw(784) Version 1.0.1.0: ID: 227870 Extension in IO-Mapping for SG3 CanIO Datapoints for Bus current and Bus voltage added Channel description changed: Yes Configuration description changed: No Firmware changed: No Firmware: 1\7104_1.fw(530), 1\7104_2.fw(530), 1\7104_5.fw(768), 1\7104_6.fw(784) |
|||||
| Версия | Язык | Операционная система | Дата | Размер | Тип | Загрузка |
| 1.1.0.0 | * | 11.02.2016 | 635 кБ | EXE | AS4_HW_X20PS3300.exe | |
| Описание |
V4.0 HW Upgrade (X20PS3300) Revision information X20PS3300 Version 1.1.0.0: ID: 464150 General adaptions in hardware files Adaptions to maintain hardwarefiles of X20 and X20c modules more easily Channel description changed: Yes Configuration description changed: Yes Firmware changed: No ID: 464160 Currently produced Firmware added Firmware for HW variant 6 published in AS Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\7104_1.fw(530), 1\7104_2.fw(530), 1\7104_5.fw(768), 1\7104_6.fw(816) Version 1.0.3.0: ID: 459435 Adaption for AS4 - AutoConnect changed to X20BM01 - Accessory X20BM05 added to documentation Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\7104_1.fw(530), 1\7104_2.fw(530), 1\7104_5.fw(768), 1\7104_6.fw(784) Version 1.0.2.0: ID:260545 / Support ID: 400061307 Error correction in channel description Adverse settings in the AS I/O configuration may cause an error on X2X Channel description changed: Yes Configuration description changed: No Firmware changed: No Firmware: 1\7104_1.fw(530), 1\7104_2.fw(530), 1\7104_5.fw(768), 1\7104_6.fw(784) Version 1.0.1.0: ID: 227870 Extension in IO-Mapping for SG3 CanIO Datapoints for Bus current andBus voltage added Channel description changed: Yes Configuration description changed: No Firmware changed: No Firmware: 1\7104_1.fw(530), 1\7104_2.fw(530), 1\7104_5.fw(768), 1\7104_6.fw(784) |
|||||
