HMI Diagnostics Utility (WES7, Win7, Win8.1, Win10)

DWL@DWL10000115129

Версия Язык
Операционная система
Дата
Размер
Тип Загрузка
2.1 * Win7/32bit, Win7/64bit, WES7, Windows8.1, Windows10 30.03.2018 2 МБ ZIP B_R_HMI_Diagnostics_V2.1.ZIP
Описание HMI Diagnostics Utility (WES7, Win7, Win8.1, Win10)

**************************************************************
Please note that the HMI Diagnostics Utility has been replaced
by the HMI Report Utility in the Universal ADI driver from
version 2.0 (Windows 10 2016 LTSB and later).
**************************************************************

B&R HMI Diagnostics analyzes your device and creates a report
file. This report can be used for error diagnosis.

This version supports the device families:
- Automation PC 510
- Automation PC 511
- Automation PC 620
- Automation PC 810
- Automation PC 820
- Automation PC 910
- Automation PC 2100
- Automation PC 2200
- Automation PC 3100
- Mobile Panel 7100 (32-bit only)
- Panel PC 700
- Panel PC 800
- Panel PC 900
- Panel PC 2100
- Panel PC 2200
- Panel PC 3100
- Power Panel 500
and connected:
- Automation Panel 800
- Automation Panel 900
- Automation Panel 9x3
- Automation Panel 9xD
- Automation Panel 1000
- Automation Panel 5000

Supported B&R operating systems:
- Windows 7 SP1
- Windows Embedded Standard 7 SP1
- Windows 8.1
- Windows 10

Make sure to use the correct binary file:
BrHmiDiag.exe for all 32-bit Windows versions.
BrHmiDiag_x64.exe for all 64-bit Windows versions.


----------------------------------------------------------------
Version 2.1 / 2018-02-27 / PAM
----------------------------------------------------------------

Changes

- Support for Automation PC and Panel PC 2200 added.
- Support for hypervisor synchronization added.
Версия Язык
Операционная система
Дата
Размер
Тип Загрузка
2.0 * Win7/32bit, Win7/64bit, WES7, Windows8.1, Windows10 03.11.2017 2 МБ ZIP B_R_HMI_Diagnostics_V2.0.ZIP
Описание HMI Diagnostics Utility (WES7, Win7, Win8.1, Win10)

B&R HMI Diagnostics analyzes your device and creates a report
file. This report can be used for error diagnosis.

This version supports the device families:
- Automation PC 510
- Automation PC 511
- Automation PC 620
- Automation PC 810
- Automation PC 820
- Automation PC 910
- Automation PC 2100
- Automation PC 3100
- Mobile Panel 7100 (32-bit only)
- Panel PC 700
- Panel PC 800
- Panel PC 900
- Panel PC 2100
- Panel PC 3100
- Power Panel 500
and connected:
- Automation Panel 800
- Automation Panel 900
- Automation Panel 9x3
- Automation Panel 9xD
- Automation Panel 1000
- Automation Panel 5000

Supported B&R operating systems:
- Windows 7 SP1
- Windows Embedded Standard 7 SP1
- Windows 8.1
- Windows 10

Make sure to use the correct binary file:
BrHmiDiag.exe for all 32-bit Windows versions.
BrHmiDiag_x64.exe for all 64-bit Windows versions.


----------------------------------------------------------------
Version 2.0 / 2017-09-05 / PAM
----------------------------------------------------------------

Changes

- Support for Windows XP removed.
- Support for Automation Panel 830 removed.
- Support for Mobile Panel 40/50 removed.
- Support for Mobile Panel 100/200 removed.
- Support for Panel PC 300 removed.
- Support for Power Panel 100/200 removed.
- Support for Power Panel 300/400 removed.
- Support for Automation PC and Panel PC 3100 added.
(B&R Universal ADI driver V1.1 is required)
- Support for Mobile Panel 7100 added.
- Support for SDL4 added.
(B&R Universal ADI driver V1.1 is required)
- Support for USB Enable on Automation Panels added.
(B&R Universal ADI driver V1.1 is required)
- Support for ISIO module (5AC901.ISIO-00) added.
(B&R Universal ADI driver V1.1 is required)
- Support for module functions added.
(B&R Universal ADI driver is required)
- Support for temperature and fan log values added.
(B&R Universal ADI driver is required)
- Updated company name.
- B&R drivers are only shown when an instance is active.
Версия Язык
Операционная система
Дата
Размер
Тип Загрузка
1.90 * WinXP, WinXPe, WES2009, Win7/32bit, Win7/64bit, WES7, Windows8.1, Windows10 24.08.2016 2 МБ ZIP B_R_HMI_Diagnostics_V1.90.ZIP
Описание HMI Diagnostics Utility (WinXP, Win7, Win8.1, Win10)

B&R HMI Diagnostics analyzes your device and creates a report file. This report can be used for error diagnosis.

Supported B&R devices:
- Automation Panel 800
- Automation Panel 830
- Automation Panel 900
- Automation Panel 9x3
- Automation Panel 9xD
- Automation Panel 1000
- Automation Panel 5000
- Automation PC 510
- Automation PC 511
- Automation PC 620
- Automation PC 810
- Automation PC 820
- Automation PC 910
- Automation PC 2100
- Mobile Panel 40/50
- Mobile Panel 100/200
- Panel PC 300
- Panel PC 700
- Panel PC 800
- Panel PC 900
- Panel PC 2100
- Power Panel 100/200
- Power Panel 300/400
- Power Panel 500

Supported operating systems:
- Windows XP SP3
- Windows Embedded Standard 2009
- Windows 7 SP1 (32-bit and 64-bit)
- Windows Embedded Standard 7 SP1 (32-bit and 64-bit)
- Windows Embedded 8.1 Industry Pro (32-bit and 64-bit)
- Windows 10 IoT Enterprise 2015 LTSB (32-bit and 64-bit)

Make sure to use the correct binary file:

BrHmiDiag.exe: Windows desktop operating systems like Windows XP, Windows 7 or Windows 8.1.
BrHmiDiag_x64.exe: 64-bit Windows desktop operating systems like Windows 7 64-bit or Windows 8.1 64-bit.

----------------------------------------------------------------
Version 1.90 / 2016-06-28 / PAM
----------------------------------------------------------------

Changes:
- Support for AP1000 and AP5000 added.
- Support for SDL3 added.
- Support for Windows 10 added.
- Support for statistics values greater than 65,535 added. (ADI driver support required)
- "Description" table column renamed to "Remark".
- Unnecessary remarks removed.
- Test group "Automation Device Interface" renamed to "B&R Drivers and Tools".
- Support for DefaultSettingsRestore.exe in test category "B&R Drivers and Tools -> ADI Driver" added.
- Support for ADI SNMP Agent, CAN Driver, SRAM Driver, Touch Driver and Touch Lock added.
- Install location and date added in "Product Information".

Fixes:
- UPS components in test group "Automation Device Interface" were not shown on APC910/PPC900.
- BrAdiUpsSvc.exe in test group "Automation Device Interface" was not shown in Windows 8.1.
- An empty headline ("Temperatures") was shown on APC2100 display link.
- An empty headline ("Temperatures") was shown on APC51x and PP500 IF boards.
- An empty headline ("Temperatures") was shown on APC51x system units.
- Test group "DVI" was shown on PP500s without an I/O board.
- An incorrect error message was shown when the DVI header could not be read.
Версия Язык
Операционная система
Дата
Размер
Тип Загрузка
1.80 * WinXP, WinXPe, WES2009, Win7/32bit, Win7/64bit, WES7, Windows8.1 29.09.2014 488 кБ ZIP B_R_HMI_Diagnostics_V1.80.ZIP
Описание HMI Diagnostics Utility (WinXP, Win7, Win8.1)

B&R HMI Diagnostics analyzes your device and creates a report file. This report can be used for error diagnosis.

Supported B&R devices:
- Automation Panel 800
- Automation Panel 830
- Automation Panel 900
- Automation Panel 9x3
- Automation Panel 9xD
- Automation PC 2100
- Automation PC 510
- Automation PC 511
- Automation PC 620
- Automation PC 810
- Automation PC 820
- Automatoin PC 910
- Mobile Panel 40/50
- Mobile Panel 100/200
- Panel PC 2100
- Panel PC 300
- Panel PC 700
- Panel PC 800
- Panel PC 900
- Power Panel 100/200
- Power Panel 300/400
- Power Panel 500

Supported operating systems:
- Windows XP SP3
- Windows Embedded Standard 2009
- Windows 7 SP1 (32-bit and 64-bit)
- Windows Embedded Standard 7 SP1 (32-bit and 64-bit)
- Windows Embedded 8.1 Industry Pro (32-bit and 64-bit)

Make sure to use the correct binary file:

BrHmiDiag.exe: Windows desktop operating systems like Windows XP, Windows 7 or Windows 8.1.
BrHmiDiag_x64.exe: 64-bit Windows desktop operating systems like Windows 7 64-bit or Windows 8.1 64-bit.


----------------------------------------------------------------
Version 1.80 / 2014-07-16
----------------------------------------------------------------

Changes

- Support for APC2100/PPC2100 has been added. (B&R APC2100/PPC2100 ADI Driver V3.0 is required)
- Support for Windows 8.1 has been added.

Fixes

- Factory settings of the display of a PPC900 were not shown.
- Crashed when no ADI driver was installed.
Версия Язык
Операционная система
Дата
Размер
Тип Загрузка
1.70 * WinXP, WinXPe, WinXP+SP2, WES2009, Win7/32bit, Win7/64bit, WES7 17.01.2014 488 кБ ZIP B_R_HMI_Diagnostics_V1.70.ZIP
Описание HMI Diagnostics Utility (WinXP, Win7)

B&R HMI Diagnostics analyzes your device and creates a report file. This report can be used for error diagnosis.

B&R HMI Diagnostics supports different operating systems.
Make sure to use the correct binary file:

BrHmiDiag.exe Windows desktop operating systems like Windows XP, Windows Vista or Windows 7.
BrHmiDiag_x64.exe 64-bit Windows desktop operating systems like Windows Vista 64-bit or Windows 7 64-bit.


----------------------------------------------------------------
Version 1.70 / 2013-10-22
----------------------------------------------------------------

Changes

- Support for PPC900 has been added. (B&R APC910 PPC900 ADI Driver V2.1 is required)
- Key layers now begin at 0.
- Support for CPU power on APC910 and PPC900 has been added.
- Support for CPU temperature on CCAX CPU boards has been added.
- Support for BIOS core version has been removed.
- Support for temperature, fan and UPS alarms have been added.

Fixes

- Raw data of factory settings on APC910 were read with wrong size.
- Mode/node switch was shown on APC510.
Версия Язык
Операционная система
Дата
Размер
Тип Загрузка
1.50 * WinXP, WinXPe, WinXP+SP2, WES2009, Win7/32bit, Win7/64bit, WES7 14.11.2012 480 кБ ZIP B_R_HMI_Diagnostics_V1.50.ZIP
Описание HMI Diagnostics Utility (WinXP, Win7)

B&R HMI Diagnostics analyzes your device and creates a report file. This report can be used for error diagnosis.

B&R HMI Diagnostics supports different operating systems.
Make sure to use the correct binary file:

BrHmiDiag.exe Windows desktop operating systems like Windows XP, Windows Vista or Windows 7.
BrHmiDiag_x64.exe 64-bit Windows desktop operating systems like Windows Vista 64-bit or Windows 7 64-bit.


----------------------------------------------------------------
Version 1.50 / 2012-09-12
----------------------------------------------------------------

Changes

- Support for APC910 has been added. (B&R APC910 ADI Driver V0.6 is required)

Fixes

- Serveral smaller bug fixes and optimizations on the program interface.
Версия Язык
Операционная система
Дата
Размер
Тип Загрузка
1.40 * WinXP, WinCE5x, WinXPe, WinXP+SP2, WinCE6x, WES2009, Win7/32bit, Win7/64bit, WES7 13.12.2011 822 кБ ZIP B_R_HMI_Diagnostics_V1.40.ZIP
Описание HMI Diagnostics Utility

B&R HMI Diagnostics analyzes your device and creates a report
file. This report can be used for error diagnosis.

B&R HMI Diagnostics supports different operating systems.
Make sure to use the correct binary file:

BrHmiDiag.exe Windows desktop operating systems like Windows XP or Windows 7.

Folder x64:</>
BrHmiDiag_x64.exe 64-bit Windows desktop operating systems like Windows 7 64-bit.

Folder CE:</>
BrHmiDiag_CE50_ARM.exe Windows CE 5.0, ARM
BrHmiDiag_CE50_X86.exe Windows CE 5.0, X86
BrHmiDiag_CE60_X86.exe Windows Embedded CE 6.0, X86
Версия Язык
Операционная система
Дата
Размер
Тип Загрузка
1.30 * WinXP, WinCE5x, WinXPe, WinXP+SP2, WinCE6x, WES2009, Win7/32bit 12.04.2011 552 кБ ZIP B_R_HMI_Diagnostics_V1.30.ZIP
Описание HMI Diagnostics Utility

B&R HMI Diagnostics analyzes your device and creates a report
file. This report can be used for error diagnosis.

B&R HMI Diagnostics supports different operating systems. Make sure to use the correct binary file:

BrHmiDiag.exe Windows desktop operating systems like Windows XP, Windows Vista or Windows 7.
BrHmiDiag_CE50_ARM.exe Windows CE 5.0, ARM
BrHmiDiag_CE50_X86.exe Windows CE 5.0, X86
BrHmiDiag_CE60_X86.exe Windows Embedded CE 6.0, X86
Версия Язык
Операционная система
Дата
Размер
Тип Загрузка
1.20 * WinXP, WinCE5x, WinXPe, WinXP+SP2, WinCE6x, WinVista, WES2009, Win7/32bit, Win7/64bit 21.09.2010 527 кБ ZIP B_R_HMI_Diagnostics_V1.20.ZIP
Описание HMI Diagnostics Utility

B&R HMI Diagnostics analyzes your device and creates a report
file. This report can be used for error diagnosis.

B&R HMI Diagnostics supports different operating systems. Make sure to use the correct binary file:

BrHmiDiag.exe Windows desktop operating systems like Windows XP, Windows Vista or Windows 7.
BrHmiDiag_CE50_ARM.exe Windows CE 5.0, ARM
BrHmiDiag_CE50_X86.exe Windows CE 5.0, X86
BrHmiDiag_CE60_X86.exe Windows Embedded CE 6.0, X86
Loading
Вернутся к списку

Укажите страну и язык

B&R Logo