Please choose country and language

Short description
Bus module Bus base - Backplane for bus controller fieldbus interface and bus controller power supply module
General information
Power consumption
Bus 0.25 W
Internal I/O -
Additional power dissipation caused by actuators (resistive) [W] -
Certifications
CE Yes
ATEX Zone 2, II 3G Ex nA nC IIA T5 Gc
IP20, Ta (see X20 user's manual)
FTZÚ 09 ATEX 0083X
UL cULus E115267
Industrial control equipment
HazLoc cCSAus 244665
Process control equipment
for hazardous locations
Class I, Division 2, Groups ABCD, T5
DNV GL Temperature: B (0 - 55°C)
Humidity: B (up to 100%)
Vibration: B (4 g)
EMC: B (bridge and open deck)
LR ENV1
KR Yes
ABS Yes
EAC Yes
KC Yes
I/O power supply
Nominal voltage 24 VDC
Permissible contact load 10 A
Operating conditions
Mounting orientation
Horizontal Yes
Vertical Yes
Installation elevation above sea level
0 to 2000 m No limitation
>2000 m Reduction of ambient temperature by 0.5°C per 100 m
Degree of protection per EN 60529 IP20
Ambient conditions
Temperature
Operation
Horizontal mounting orientation -25 to 60°C
Vertical mounting orientation -25 to 50°C
Derating -
Storage -40 to 85°C
Transport -40 to 85°C
Relative humidity
Operation 5 to 95%, non-condensing
Storage 5 to 95%, non-condensing
Transport 5 to 95%, non-condensing
Mechanical properties
Note Left and right X20 end cover plates included in delivery
Pitch 37.5+0.2 mm
Material number:
X20BB80
Description:

The following modules are used on the bus module:

  • Base module (BC, HB, etc.)
  • Supply module

The left and right end plates are included in the delivery.

  • Bus base

The following modules are used on the bus module:

  • Base module (BC, HB, etc.)
  • Supply module

The left and right end plates are included in the delivery.

Please choose country and language

B&R Logo