Please choose country and language

Short description
Communication module DeviceNet scanner (master)
General information
B&R ID code 0xA70C
Status indicators Module status, network status, data transfer, terminating resistor
Module status Yes, using status LED and software
Network status Yes, using status LED and software
Data transfer Yes, using status LED
Terminating resistor Yes, using status LED
Power consumption 1.1 W
Additional power dissipation caused by actuators (resistive) [W] -
CE Yes
ATEX Zone 2, II 3G Ex nA nC IIA T5 Gc
IP20, Ta (see X20 user's manual)
FTZÚ 09 ATEX 0083X
UL cULus E115267
Industrial control equipment
HazLoc cCSAus 244665
Process control equipment
for hazardous locations
Class I, Division 2, Groups ABCD, T5
DNV GL Temperature: B (0 - 55°C)
Humidity: B (up to 100%)
Vibration: B (4 g)
EMC: B (bridge and open deck)
KR Yes
KC Yes
Interface IF1
Fieldbus DeviceNet scanner (master)
Variant 5-pin male multipoint connector
Max. distance 500 m
Transfer rate Max. 500 kbit/s
Terminating resistor Integrated in module
Controller netX100
Memory 8 MB SDRAM
Electrical properties
Electrical isolation PLC isolated from DeviceNet (IF1)
Operating conditions
Mounting orientation
Horizontal Yes
Vertical Yes
Installation elevation above sea level
0 to 2000 m No limitation
>2000 m Reduction of ambient temperature by 0.5°C per 100 m
Degree of protection per EN 60529 IP20
Ambient conditions
Horizontal mounting orientation -25 to 60°C
Vertical mounting orientation -25 to 50°C
Derating -
Storage -40 to 85°C
Transport -40 to 85°C
Relative humidity
Operation 5 to 95%, non-condensing
Storage 5 to 95%, non-condensing
Transport 5 to 95%, non-condensing
Mechanical properties
Note Order 1x terminal block TB2105 separately
Slot In the X20 CPU and expandable bus controller X20BC1083
Material number:
  • DeviceNet scanner
  • Integrated terminating resistor

The interface module is equipped with a DeviceNet scanner interface. This allows third-party components to be integrated in the B&R system and makes it possible to quickly and easily transfer data in both directions.

The interface module can be operated in X20 CPUs or in the expandable POWERLINK bus controller X20BC1083.

Mandatory Accessories
Terminal blocks
0TB2105.9010 Accessory terminal block, 5-pin, screw clamps 2.5 mm²
0TB2105.9110 Accessory terminal block, 5-pin, push-in terminal block 2.5 mm²
Automation Studio HW Upgrades Version (Date) Download
V3.0 HW Upgrade (X20IF1051-1) EXE / 657 KB
V3.0 HW Upgrade (X20IF1051-1) EXE / 1 MB
V4.0 HW Upgrade (X20IF1051-1) EXE / 863 KB
Certificates Version (Date) Download
244665 CSA HazLoc Certificate of Compliance X20, X67 PDF / 56 KB
ABS Certificate of Product Design Assessment - X20 IO Series PDF / 2 MB
DNV GL Type Approval Certificate - X20 / Power Panel T30 PDF / 164 KB
E115267 UL CoC X20 PDF / 847 KB
FTZU 09 ATEX 0083X PDF / 697 KB
KR Type Approval Certificate MIL39390-AC003 (X20 System) PDF / 758 KB
Lloyds Register PDF / 506 KB
X20, X67 KC certificates PDF / 6 MB
X20IF1051-1 Certificate PDF / 47 KB
Documentation Version (Date) Download
Data sheet X20IF1051-1 PDF / 1 MB
X20 System User´s Manual PDF / 56 MB
E-CAD (Electro or EPLAN Templates) Version (Date) Download
X20 EPLAN P8 from V2.4 EXE / 161 MB
M-CAD (Mechan. Templates) Version (Date) Download
3D File DXF/STEP X20 Interface module CAN/DeviceNet ZIP / 946 KB
Dimensions PDF X20 Interface Module CAN/DeviceNet PDF / 4 KB

Please choose country and language

B&R Logo