General information
| Certifications | |
| CE | Yes |
Motor
| Nominal speed nN [rpm] | 3000 |
| Number of pole pairs | 5 |
| Nominal torque Mn [Nm] | 13.9 |
| Nominal power PN [W] | 0 |
| Nominal current IN [A] | 8.4 |
| Stall torque M0 [Nm] | 19.5 |
| Stall current I0 [A] | 11.78 |
| Maximum torque Mmax [Nm] | 76.6 |
| Maximum current Imax [A] | 64 |
| Maximum speed nmax [rpm] | 6100 |
| Torque constant KT [Nm/A] | 1.66 |
| Voltage constant KE [V/1000 rpm] | 107 |
| Stator resistance R2ph [Ω] | 0.75 |
| Stator inductance L2ph [mH] | 6.2 |
| Electrical time constant tel [ms] | 8.267 |
| Thermal time constant ttherm [min] | 30 |
| Moment of inertia J [kgcm2] | 32 |
| Weight without brake m [kg] | 13.3 |
Holding brake
| Holding torque of brake MBr [Nm] | 0 |
| Mass of brake [kg] | 2 |
| Moment of inertia of brake JBr [kgcm2] | 0.605 |
Recommendations
| ACOPOS 8Vxxxx.xx... | 1180 |
| ACOPOSmulti 8BVIxxxx... | 0110 |
| Cross section for B&R motor cables [mm2] | 4 |
Options
| Connection type | Connector (ytec system) |
| Connection direction | Angled (swivel) |
| Encoder | E6 optical 2048-line single-turn |
| Shaft end | Key |
Número do material:
8JSA64.E6030D100-0Descrição:
Synchronous motor, number of pole pairs: 5 pairs, nominal speed: 3,000 rpm stall torque: 19.500 Nm, without brake, shaft key, angled connector (swivel), centering diameter 130 mm, j6 fit self-cooling, type A, IP54 protection, without oil seal 560 VDC, holding torque of brake: 0.00 Nm, E6 opt. 2048-line single-turn
| Certificados | Version (Data) | Download |
|---|---|---|
| EU Declaration Motors Dreh-Sync | PDF / 302 KB | |
| UK Declaration Motors Dreh-Sync | PDF / 107 KB |
| DT Upgrade | Version (Data) | Download |
|---|---|---|
| V4.0 DT Upgrade (8JSA64.E6030D100-0) | EXE / 299 KB |
| Documentação | Version (Data) | Download |
|---|---|---|
| 8JSA user's manual | PDF / 6 MB |