Please choose country and language

V3.0 HW Upgrade (8I84xxxxxxx.01P-1)

DWL@DWL10000121107

Version Language
Operating System
Date
Size
Type Download
1.0.9.2 * 07/13/2017 13 MB EXE AS3.0_HW_8I84xxxxxxx.01P-1.exe
Description V3.0 HW Upgrade (8I84xxxxxxx.01P-1)

Revision information 8I84xxxxxxx.01P-1

Version 1.0.9.2:

ID: 541450 / Support ID: 400222673
Internal revision
Inverter can be configured as Multiplexed Station in AS4 project.
Channel description changed: No
Configuration descriptionchanged: Yes
Firmware changed: No
Firmware: 1\45283_1.fw(33), 1\45283_2.fw(33), 1\45283_3.fw(33)

Version 1.0.9.1:

ID: 515915
Internal revision
File history corrected
Channel description changed: No
Configuration description changed: No
Firmware changed: No
Firmware: 1\45283_1.fw(33), 1\45283_2.fw(33), 1\45283_3.fw(33)

Version 1.0.9.0:

ID: 340920 / Support ID: 400114159
Download of parameter SFR revised
Channel description changed: No
Configuration description changed: Yes
Firmware changed: No

ID: 511520
Default values resored
Default parameter values for module supervision, ACC, DEC,and QSTD restored, in order to avoid problems during conversion of existing projects in future.
ATTENTION: If module was stored in an Automation Studio project using hardware file 1.0.8.5, ensure parameters module supervision, ACC, DEC, and QSTD to have the desired values after upgrading.

INFORMATION:
The demaged file V 1.0.8.5 was delivered by Automation Studio 4.2.5 bis 4.2.6(complete installation).
Channel description changed: Yes
Configuration description changed: No
Firmware changed: No

ID: 511560
Function models renamed
no influence to technical behavior
Functions model "default" renamed to "Direct control"
Functions model "default (MotionConfiguration)" renamed to "ACP10SDC (MotionConfiguration)"
Channeldescription changed: Yes
Configuration description changed: No
Firmware changed: No

ID: 511565
Function models renamed
no influence to technical behavior
Functions model "default" renamed to "Direct control"
Functions model "default (MotionConfiguration)" renamed to "ACP10SDC(MotionConfiguration)"
Channel description changed: Yes
Configuration description changed: No
Firmware changed: No
Firmware: 1\45283_1.fw(33), 1\45283_2.fw(33), 1\45283_3.fw(33)

Version 1.0.8.5:

ID: 380415 / Support ID: 400132814
View in System Designer revised
Channel description changed: No
Configuration description changed: No
Firmware changed: No

ID: 394765 / Support ID: 400139210, 400136560
Motion Wizzard revised
In AS 4.x, the aged library "AsString" won’t be added to a AS project anymore. The "AsBrStr" will be used by the Motion instead.
Channel description changed: No
Configuration description changed: No
Firmware changed: No

ID: 437595 / Support ID: 400157277
Descriptions of parameters in hardware file revised
Channel descriptionchanged: No
Configuration description changed: Yes
Firmware changed: No
Firmware: 1\45283_1.fw(33), 1\45283_2.fw(33), 1\45283_3.fw(33)

Version 1.0.7.0:

ID: 325225
Correction of the powerlink parameter
Channel description changed: No
Configuration description changed: No
Firmware changed: No

ID: 326100
Increase minimal configuration
Channel description changed: No
Configuration description changed: No
Firmware changed: No

ID: 329035 / Support ID: 400106905
Support for additional motor parameters
Channel description changed: No
Configuration description changed: No
Firmware changed: No

ID: 337925 / Support ID: 400112441
Changed order of parameters transfer (LET, EFT)
Channel description changed: No
Configuration description changed: No
Firmware changed: No
Firmware: 1\45283_1.fw(33),1\45283_2.fw(33), 1\45283_3.fw(33)

Version 1.0.5.0:

ID: 291170 / Support ID: 400087675
The parameter RSA (Cold Stator Resistance) can not be written with the IO configuration
Channel description changed: No
Configuration description changed: Yes
Firmware changed: No
Firmware: 1\45283_1.fw(33), 1\45283_2.fw(33), 1\45283_3.fw(33)

Version 1.0.4.0:

ID: 278900 / Support ID: 400080764
FLU-Parameter is alwaystransitted to Inverter during initialisazion now.
Channel description changed: No
Configuration description changed: Yes
Firmware changed: No

ID: 291690
With the configuration "Download parameters = no" all inverter configurations will be retained now.
Channel description changed: No
Configuration description changed: Yes
Firmware changed: No

ID: 299720 / Support ID: 400093601
SDC-LifeCnt does not count ifDownload parameters = "no"
Channel description changed: No
Configuration description changed: Yes
Firmware changed: No

ID: 305530
Bug-fix of SDC_SetTime monitoring
Channel description changed: No
Configuration description changed: No
Firmware changed: Yes
Firmware: 1\45283_1.fw(33), 1\45283_2.fw(33), 1\45283_3.fw(33)

Version 1.0.2.0:

ID: 256295 / Support ID: 400064215
Expanded commandbits can be linked in the IO-Mapping.
Channel description changed: Yes
Configuration description changed: No
Firmware changed: No

ID: 276980
Support of 'Multiple Asynchronous Send'
Channel description changed: No
Configuration description changed: No
Firmware changed: Yes

ID: 276990
Support of Hardware Variant 3
Channel description changed: No
Configuration description changed: No
Firmware changed: Yes
Firmware: 1\45283_1.fw(29), 1\45283_2.fw(29), 1\45283_3.fw(29)

Version 1.0.1.0:

ID: 246155 / Support ID: 400056761
The parameter TLA (torque limit active) now allows the option YES to be selected.
Channel description changed: No
Configuration description changed: Yes
Firmware changed: No
Firmware: 1\45283_1.fw(24), 1\45283_2.fw(24)

Version 1.0.0.3:

ID: 217845
First version.
Channel description changed: No
Configuration description changed: No
Firmware changed: No
Firmware: 1\45283_1.fw(24), 1\45283_2.fw(24)
Back to list

Please choose country and language

B&R Logo

Please choose country

B&R Logo