Please choose country and language

ADI driver universal (Win10 64-bit)

DWL@DWL10000515514

Version Language
Operating System
Date
Size
Type Download
2.3.0 * Windows10 10/09/2020 4 MB ZIP ADI Driver 2.3.0.zip
Description ADI driver universal (Win10 64-bit)

The Automation Device Interface (ADI) driver enables access to specific functions of B&R devices.

It can be used, for example, to set LEDs or change the brightness setting on a B&R Automation Panel.

Updates

- ADI DLL (BrAdi.dll) 5.2.0
- ADI DLL (generic interface) (BrAdiGi.dll) 1.2.0
- Control Center (BrCtrlCenter.exe) 4.8.0
- HMI Report (BR.Hmi.Report.Gui.exe) 1.3.0
- MTCX driver (BrMtcxDrv.sys) 1.2.1
- UPS Service (BR.Adi.Ups.Service.exe) 2.0.2

Error corrections

ADI DLL:
- A memory error could occur in very rare cases with multi-touch lock.

HMI Report:
- An exception was thrown if there are entries in WERUNTIME.INI without "=" characters.
- When creating a report with invalid XML characters, the creation was aborted. Invalid characters are now replaced by a replacement character (0xFFFD).
- General display data (e.g. brightness, keys, LEDs) of a Panel PC have not been written to the report since version 1.2.0.
- Since version 1.2.0, no line break was added between the device ID and compatibility ID in the text report for panel modules.

MTCX driver:
- No error was returned when a command timeout occurred in interrupt mode.

UPS Service:
- Service name changed from "Service1" to "BrAdiUpsSvc".
- For systems without a UPS, an error entry was sometimes written to the event log during service startup.

Changes

ADI DLL:
- Support for PPC1200.
- Implemented multi-touch lock for PPC900 Skylake.
- Legacy functions that are mapped via module functions have been removed from the MPC3100 (present flags, panel functions).
- ADI_HARDWARE_PANEL_LOCAL can now be used to check whether the selected panel is the local display of a Panel PC.
- The resolution of the local display of a Panel PC can be read with ADI_FACTORY_DVI3_DISPLAY_HRES and ADI_FACTORY_DVI3_DISPLAY_VRES.

Control Center:
- Support for PPC1200.
- Removed support for MP7100.

HMI Report:
- Support for the local display of the PPC1200.
- A DeviceInspector file is now additionally stored in the diagnostic package.
- Support for DVI channel 3 (local display of a Panel PC).
- Support for reading the BIOS update mode.

UPS Service:
- Messages are no longer written to the event log when starting and stopping the service.
Version Language
Operating System
Date
Size
Type Download
2.2.0 * Windows10 03/26/2020 4 MB ZIP ADI Driver V2.2.0.zip
Description ADI driver universal (Win10 64-bit)

The Automation Device Interface (ADI) driver enables access to
specific functions of B&R devices.

It can be used, for example, to set LEDs or change the brightness setting on a B&R Automation Panel.

Updates

- ADI DLL (BrAdi.dll) 5.1.0
- ADI DLL (generic interface) (BrAdiGi.dll) 1.1.0
- Control Center (BrCtrlCenter.exe) 4.7.0
- HMI Report (BR.Hmi.Report.Gui.exe) 1.2.0

Error corrections

- ADI DLL:
- The firmware version and link type could not be read on an
AP830.
- The firmware could not be updated and backed up on an AP830.
- The statistics were displayed four times on an AP830.
- If a file download and upload was started at the same time, an
error could occur in rare cases.

- HMI Report:
- HMI Report got stuck while creating a diagnostics package on an
operating system with German language.
- If a diagnostics package was created on an operating system with
German language, umlauts and special characters were not
displayed correctly in file SystemInfo.txt.
- Corrected misprints in the report.
- If the min. fan speed value was not equal to "Auto", report
creation was aborted.
- The fan test group was written twice on a PPC900 with fans and
bus fans.
- The test name for the PPC900 bus fans was the same as for the
normal fans.
- If the device type could not be read, an empty string was
written into the report instead of "Unknown".

Changes

- ADI DLL:
- Support for MPC3100.
- New function AdiGetLastError(). The last ADI error is returned
as a Win32 error code.
- File upload is now also supported in hypervisor mode.
- Panel module functions are now also supported on the AP800 and
AP900.
- ADI_MODULE_HARDWARE_PRESENT can now be used to check whether a
PC or panel module is available.
- New function AdiGetPanelModuleHardwareValue().
- Implemented module functions for downloading and uploading
files.
New functions:
- AdiDownloadModuleFile()
- AdiUploadModuleFile()
- AdiDownloadPanelModuleFile()
- AdiUploadPanelModuleFile()

- Control Center:
- The versions dialog box has been converted to a list view. The
CRC error status is displayed as additional information.
- New hot plugging behavior: The displayed modules are updated
when the tab is changed (new modules added, no longer existing
modules removed). Values of modules that no longer exist are
displayed with *** until a tab change occurs.

- HMI Report:
- The Windows 10 activation status is displayed in the report.
- Added support for SDL4 Converter without a connected panel.
Version Language
Operating System
Date
Size
Type Download
2.1.1 * Windows10 06/24/2019 4 MB ZIP ADI Driver V2.1.1.zip
Description ADI driver universal (Win10 64-bit)


----------------------------------------------------------------
GENERAL
----------------------------------------------------------------

The Automation Device Interface (ADI) driver enables access to
specific functions of B&R devices.

This version supports the device families:
- Automation PC 910 (APC910)
- Automation PC 2100 (APC2100)
- Automation PC 2200 (APC2200)
- Automation PC 3100 (APC3100)
- Panel PC 900 (PPC900)
- Panel PC 2100 (PPC2100)
- Panel PC 2200 (PPC2200)
- Panel PC 3100 (PPC3100)
and connected:
- Automation Panel 800 (AP800)
- Automation Panel 830 (AP830)
- Automation Panel 900 (AP900)
- Automation Panel 9x3 (AP9x3)
- Automation Panel 9xD (AP9xD)
- Automation Panel 1000 (AP1000)
- Automation Panel 5000 (AP5000)

Settings for these devices can be displayed and modified using the
Control Center applet.
Note: Some settings may be disabled depending on the B&R device
being used.

Some functions of the ADI driver:
- Changing the display brightness.
- Reading device-specific keys.
- Switching device-specific LEDs.
- Reading total operating hours.
- Reading operating elements.


Supported operating systems:
- Windows 10 IoT Enterprise 2016 LTSB (64-bit)

For additional information about the ADI driver, see the ADI
driver user's manual.

This is available at no charge from the B&R website
(http://www.br-automation.com).


----------------------------------------------------------------
INSTALLATION
----------------------------------------------------------------

Procedure for installing this software:
1. Close all applications.
2. Execute the installer.
3. Follow the instructions.

You must have administrator rights in order to perform the
installation!

Execute the installer with parameter /S for a silent/unattended
installation.
For a detailed description of parameters, see
http://nsis.sourceforge.net/Docs/Chapter3.html#installerusage.

During the installation, an existing ADI driver is detected and
can be removed automatically.
Note: If the ADI driver is in use by another application, it
cannot be removed in the normal way.


----------------------------------------------------------------
Version 2.1.1 / 2019-05-24 / PAM
----------------------------------------------------------------

Updates

- ADI DLL (generic interface) (BrAdiGi.dll) 1.0.1
- HMI Report (BR.Hmi.Report.Gui.exe) 1.1.1
- UPS Manager (BR.Adi.Ups.Manager.exe) 1.1.1
- UPS Service (BR.Adi.Ups.Service.exe) 2.0.1

Error corrections

ADI DLL:
- For strings (e.g. serial number), the last character was
sometimes not read out.

HMI Report:
- The build number was output incorrectly in Windows 10 IoT
Enterprise 2019 LTSC.

UPS Manager:
- The advanced settings could be changed without administrator
rights.

UPS Service:
- When installing on a device without a UPS, error entries were
written to the Windows event log.
Version Language
Operating System
Date
Size
Type Download
2.1 * Windows10 04/29/2019 4 MB ZIP ADI Driver V2.1.zip
Description ADI driver universal (Win10 64-bit)


----------------------------------------------------------------
GENERAL
----------------------------------------------------------------

The Automation Device Interface (ADI) driver enables access to
specific functions of B&R devices.

This version supports the device families:
- Automation PC 910 (APC910)
- Automation PC 2100 (APC2100)
- Automation PC 2200 (APC2200)
- Automation PC 3100 (APC3100)
- Panel PC 900 (PPC900)
- Panel PC 2100 (PPC2100)
- Panel PC 2200 (PPC2200)
- Panel PC 3100 (PPC3100)
and connected:
- Automation Panel 800 (AP800)
- Automation Panel 830 (AP830)
- Automation Panel 900 (AP900)
- Automation Panel 9x3 (AP9x3)
- Automation Panel 9xD (AP9xD)
- Automation Panel 1000 (AP1000)
- Automation Panel 5000 (AP5000)

Settings for these devices can be displayed and modified using the
Control Center applet.
Note: Some settings may be disabled depending on the B&R device
being used.

Some functions of the ADI driver:
- Changing the display brightness.
- Reading device-specific keys.
- Switching device-specific LEDs.
- Reading total operating hours.
- Reading operating elements.


Supported operating systems:
- Windows 10 IoT Enterprise 2016 LTSB (64-bit)

For additional information about the ADI driver, see the ADI
driver user's manual.

This is available at no charge from the B&R website
(http://www.br-automation.com).


----------------------------------------------------------------
Version 2.1 / 2019-03-27 / PAM
----------------------------------------------------------------

Updates

- ADI DLL (BrAdi.dll) 5.0
- ADI DLL (generic interface) (BrAdiGi.dll) 1.0
- Control Center (BrCtrlCenter.exe) 4.6
- Display Brightness (BR.Adi.Display.Brightness.exe) 1.0.1
- HMI Report (BR.Hmi.Report.Gui.exe) 1.1
- UPS Manager (BR.Adi.Ups.Manager.exe) 1.1
- UPS Service (BR.Adi.Ups.Service.exe) 2.0

Error corrections

ADI DLL:
- HMI Report caused the MTCX to crash on some devices when
certain system data was not available.

Display Brightness:
- On a Panel PC with connected Automation Panels, the wrong
buttons for panel selection were enabled or disabled. The
Automation Panels could not be selected.,
- A display problem with DPI resolutions greater than 96 DPI has
been corrected.

HMI Report:
- The filename in the HMI Report GUI was not applied if the
creation process was started with the Enter key.
- Headings were missing in some places in the text report.

UPS Manager:
- If the UPS Manager was executed as an administrator, the
advanced settings were sometimes only saved a minute after
closing the window.

Changes

ADI DLL:
- Function have been moved to the ADI DLL (generic interface). The
ADI DLL is only a wrapper for Windows data types.

ADI DLL (generic interface):
- First version. Based on ADI DLL 4.15 with a generic interface
(C standard data types).
- Removed support for device-specific ADI drivers.
- Removed support for MP7100.
- Removed WMI support.

Control Center:
- New tools (UPS Manager, Display Brightness, new UPS Service) and
ADI DLL (generic interface) are displayed in the "Versions" tab
under "Info".

HMI Report:
- Extended for the new UPS service.
- Support for the configuration of the new UPS service.
- Support for "Shutdown on battery time" in seconds.
- Support for ADI DLL (generic interface).
- Removed display of Default Brightness.
- Removed author in the report header since it is also displayed
under "Operating system / User account".
- The status and start type are displayed for services.

UPS Manager:
- Adapted to the new UPS Service.

UPS Service:
- Redesign in .NET.
- Removed UPS Miniclass Driver since no longer necessary.
- Removed UPS Message Utility since no longer supported.
Version Language
Operating System
Date
Size
Type Download
2.0 * Windows10 02/22/2019 4 MB ZIP ADI Driver V2.0.zip
Description ADI driver universal (Win10 64-bit)


----------------------------------------------------------------
GENERAL
----------------------------------------------------------------

The Automation Device Interface (ADI) driver enables access to
specific functions of B&R devices.

This version supports the device families:
- Automation PC 910 (APC910)
- Automation PC 2100 (APC2100)
- Automation PC 2200 (APC2200)
- Automation PC 3100 (APC3100)
- Panel PC 900 (PPC900)
- Panel PC 2100 (PPC2100)
- Panel PC 2200 (PPC2200)
- Panel PC 3100 (PPC3100)

and connected:
- Automation Panel 800 (AP800)
- Automation Panel 830 (AP830)
- Automation Panel 900 (AP900)
- Automation Panel 9x3 (AP9x3)
- Automation Panel 9xD (AP9xD)
- Automation Panel 1000 (AP1000)
- Automation Panel 5000 (AP5000)

Settings for these devices can be displayed and modified using the Control Center applet in the Control Panel.
Note: Some settings may be disabled depending on the B&R device
being used.

Some functions of the ADI driver:
- Changing the display brightness.
- Reading device-specific keys.
- Switching device-specific LEDs.
- Reading total operating hours.
- Reading operating elements.


Supported operating systems:
- Windows 10 IoT Enterprise 2016 LTSB (64-bit)

For additional information about the ADI driver, see the ADI
driver user's manual.

This is available at no charge from the B&R website
(http://www.br-automation.com).


----------------------------------------------------------------
Version 2.0 / 2018-11-23 / PAM
----------------------------------------------------------------

Updates

- ADI DLL (BrAdi.dll) 4.15
- ADI Service (BR.Adi.Service.dll) 1.0
- Control Center (BrCtrlCenter.exe) 4.5
- Display Brightness (BR.Adi.Display.Brightness.exe) 1.0
- HMI Report (BR.Hmi.Report.Gui.exe) 1.0
- MTCX Driver (BrMtcxDrv.sys) 1.2
- UPS Manager (BR.Adi.Ups.Manager.exe) 1.0
- UPS Message Utility (BrUpsMsg.exe) 2.2

Error corrections

ADI DLL:
- On an AP900 with SDL3 receiver, the factory settings could not
be written and read.

Control Center:
- On an AP900 with SDL3 receiver the temperature and statistical
values could not be read.

Changes

General:
- Application texts are displayed in the language of the operating system (German or English).

ADI DLL:
- Timeout for 256 byte flash commands increased to 60 seconds.
- The brightness and equalizer settings now apply systemwide and
no longer per user.
- Functions AdiSetDisplayDefaultBrightness() or
AdiGetDisplayDefaultBrightness() and AdiSetDisplayBrightness()
or AdiGetDisplayBrightness() now have the same function. Both
functions set the brightness and save it or read out the set
brightness.
- Support for reading the MTCX interrupt status.
- Optimized backup and update of firmware.

ADI Service:
- First version. Replaces DefaultSettingsRestore.

Control Center:
- Removed tab "UPS" and replaced by new UPS Manager application.
- Removed tab "Report" and replaced by new HMI Report application.
- Added tab "Tools". The new ADI applications can be started from
here.
- Removed KPOS display in the key dialog box.
- Removed LPOS option in tab "LEDs".

Display Brightness:
- First version.

HMI Report:
- First version. Replaces Control Center Report and HMI Diag.

MTCX driver:
- Support for the MTCX interrupt.
- Updated KMDF version from 1.09 to 1.19.

UPS Manager:
- First version. Replaces tab "UPS" of the Control Center.

UPS Message Utility:
- Removed unctions that were only supported in Windows XP.
Version Language
Operating System
Date
Size
Type Download
1.4 * Windows10 06/12/2018 6 MB ZIP ADI Driver V1.4.zip
Description ADI driver universal (Win10 64-bit)


----------------------------------------------------------------
GENERAL
----------------------------------------------------------------

The Automation Device Interface (ADI) driver enables access to
specific functions of B&R devices.

This version supports the device families:
- Automation PC 910 (APC910)
- Automation PC 2100 (APC2100)
- Automation PC 2200 (APC2200)
- Automation PC 3100 (APC3100)
- Panel PC 900 (PPC900)
- Panel PC 2100 (PPC2100)
- Panel PC 2200 (PPC2200)
- Panel PC 3100 (PPC3100)
and connected:
- Automation Panel 800 (AP800)
- Automation Panel 830 (AP830)
- Automation Panel 900 (AP900)
- Automation Panel 9x3 (AP9x3)
- Automation Panel 9xD (AP9xD)
- Automation Panel 1000 (AP1000)
- Automation Panel 5000 (AP5000)

Settings for these devices can be displayed and modified using the
Control Center applet in the Control Panel.
Note: Some settings may be disabled depending on the B&R device
being used.

Some functions of the ADI driver:
- Changing the display brightness.
- Reading device-specific keys.
- Switching device-specific LEDs.
- Reading total operating hours.
- Reading operating elements.


Supported operating systems:
- Windows 10 IoT Enterprise 2016 LTSB (64-bit)


----------------------------------------------------------------
Version 1.4 / 2018-03-19 / PAM
----------------------------------------------------------------

Updates
- ADI DLL (BrAdi.dll) 4.14
- Control Center (BrCtrlCenter.exe) 4.4

Error corrections

ADI DLL:
- When reading HDBT statistical values, valid values were also
returned in the event of error.
- On some customized AP5000 devices, the FPGA boot area could
not be read.

Control Center:
- When switching between an AP800/AP900 and an AP9x3, AP9xD,
AP1000 or AP5000, the tabs for factory settings, temperatures
and statistics displayed the values of the disconnected
panel or errors.

Changes

ADI DLL:
- Support for SDL4 Converter.
- Support for SDL4 on xPC2200.
- Support for USB Enable on Automation Panels on xPC2200.
- Changed module name ADI_PANEL_MODULE_NUMBER_CONV from
"SDL3 Converter" to "SDL Converter".
- The version of factory settings can be read on modules
ADI_PANEL_MODULE_NUMBER_PANEL, ADI_MODULE_NUMBER_PANEL and
ADI_PANEL_MODULE_NUMBER_CONV.
- UPS user settings can be read or written via
AdiGetHardwareValue() or AdiSetHardwareValue() with
ADI_HARDWARE_UPS_LOW_BAT_SHUTDOWN_TIME.

Control Center:
- Support for SDL4 Converter.
- The state of UPS user settings is no longer displayed in
tab "UPS".
- Panel fan speeds are no longer displayed.
- A report can now be generated from the command line with
"BrCtrlCenter.exe -r <Filename>".
Version Language
Operating System
Date
Size
Type Download
1.3 * Windows10 03/19/2018 6 MB ZIP ADI Driver V1.3.zip
Description ADI driver universal (Win10 64-bit)


----------------------------------------------------------------
GENERAL
----------------------------------------------------------------

The Automation Device Interface (ADI) driver enables access to
specific functions of B&R devices.

This version supports the device families:
- Automation PC 910 (APC910)
- Automation PC 2100 (APC2100)
- Automation PC 2200 (APC2200)
- Automation PC 3100 (APC3100)
- Panel PC 900 (PPC900)
- Panel PC 2100 (PPC2100)
- Panel PC 2200 (PPC2200)
- Panel PC 3100 (PPC3100)
and connected:
- Automation Panel 800 (AP800)
- Automation Panel 830 (AP830)
- Automation Panel 900 (AP900)
- Automation Panel 9x3 (AP9x3)
- Automation Panel 9xD (AP9xD)
- Automation Panel 1000 (AP1000)
- Automation Panel 5000 (AP5000)

Settings for these devices can be displayed and modified using the
Control Center applet in the Control Panel.
Note: Some settings may be disabled depending on the B&R device
being used.

Some functions of the ADI driver:
- Changing the display brightness.
- Reading device-specific keys.
- Switching device-specific LEDs.
- Reading total operating hours.
- Reading operating elements.


Supported operating systems:
- Windows 10 IoT Enterprise 2016 LTSB (64-bit)


----------------------------------------------------------------
Version 1.3 / 2018-01-03 / PAM
----------------------------------------------------------------

Updates

- ADI DLL (BrAdi.dll) 4.13
- Control Center (BrCtrlCenter.exe) 4.3

Error corrections

ADI DLL:
- Functions AdiGetPanelLockTime(), AdiSetPanelLockTime(),
AdiLockPanel() and AdiIsPanelLocked() only worked if the
selected panel was linked.
- The update section was read when backing up the SDL4 transmitter
firmware.
- The SDL3 Converter factory settings could not be programmed.

Control Center:
- If an Automation Panel was disconnected, error messages for that
panel appeared in the report.
- After a firmware update and restart of an SDL receiver or SDL3
Converter, a warning that the panel or SDL3 Converter must be
restarted appeared when backing up the firmware.

Changes

ADI DLL:
- Support for APC2200/PPC2200.

Control Center:
- Support for APC2200/PPC2200.
Version Language
Operating System
Date
Size
Type Download
1.2 * Windows10 12/05/2017 6 MB ZIP ADI Driver V1.2.zip
Description ADI driver universal (Win10 64-bit)


----------------------------------------------------------------
GENERAL
----------------------------------------------------------------

The Automation Device Interface (ADI) driver enables access to
specific functions of B&R devices.

This version supports the device families:
- Automation PC 910 (APC910)
- Automation PC 2100 (APC2100)
- Automation PC 3100 (APC3100)
- Panel PC 900 (PPC900)
- Panel PC 2100 (PPC2100)
- Panel PC 3100 (PPC3100)
and connected:
- Automation Panel 800 (AP800)
- Automation Panel 830 (AP830)
- Automation Panel 900 (AP900)
- Automation Panel 9x3 (AP9x3)
- Automation Panel 9xD (AP9xD)
- Automation Panel 1000 (AP1000)
- Automation Panel 5000 (AP5000)

Settings for these devices can be displayed and modified using the
Control Center applet in the Control Panel.
Note: Some settings may be disabled depending on the B&R device
being used.

Some functions of the ADI driver:
- Changing the display brightness.
- Reading device-specific keys.
- Switching device-specific LEDs.
- Reading total operating hours.
- Reading operating elements.


Supported operating systems:
- Windows 10 IoT Enterprise 2016 LTSB (64-bit)


----------------------------------------------------------------
Version 1.2 / 2017-09-22 / PAM
----------------------------------------------------------------

Updates

- ADI DLL (BrAdi.dll) 4.12
- Control Center (BrCtrlCenter.exe) 4.2
- UPS Message Utility (BrUpsMsg.exe) 2.1
- UPS Miniclass Driver (BrAdiUps.dll) 1.6
- UPS Monitor (BrUpsMon.exe) 1.6

Error corrections

ADI DLL:
- Error code 87 was returned instead of FALSE as the return
value if a data type with a size not equal to BYTE was
specified when reading ADI_TEMPERATURE_CPU_INTERNAL.

Changes

ADI DLL:
- Extended multi-touch lock for APC3100/PPC3100.
- Support for SDL4 on APC910.
- Support for hypervisor synchronization.
- Support for reading out device name
(ADI_HARDWARE_DEVICE_TYPE and ADI_HARDWARE_DEVICE_TYPE_SHORT).

Control Center:
- Support for hypervisor synchronization in the report.

UPS Message Utility:
- Updated company name.
- Combined German and English languages into one file.

UPS Miniclass Driver:
- Updated company name.
- Combined German and English languages into one file.

UPS Monitor:
- Updated company name.
- Combined German and English languages into one file.

Installer:
- B&R ADI SNMP Agent and multi-touch lock are ended during
installation.
- Values for hypervisor synchronization are written to the
Windows registry.
Version Language
Operating System
Date
Size
Type Download
1.1 * Windows10 12/05/2017 6 MB ZIP ADI Driver V1.1.zip
Description ADI driver universal (Win10 64-bit)


----------------------------------------------------------------
GENERAL
----------------------------------------------------------------

The Automation Device Interface (ADI) driver enables access to
specific functions of B&R devices.

This version supports the device families:
- Automation PC 910 (APC910)
- Automation PC 2100 (APC2100)
- Automation PC 3100 (APC3100)
- Panel PC 900 (PPC900)
- Panel PC 2100 (PPC2100)
- Panel PC 3100 (PPC3100)
and connected:
- Automation Panel 800 (AP800)
- Automation Panel 830 (AP830)
- Automation Panel 900 (AP900)
- Automation Panel 9x3 (AP9x3)
- Automation Panel 9xD (AP9xD)
- Automation Panel 1000 (AP1000)
- Automation Panel 5000 (AP5000)

Settings for these devices can be displayed and modified using the
Control Center applet in the Control Panel.
Note: Some settings may be disabled depending on the B&R device
being used.

Some functions of the ADI driver:
- Changing the display brightness.
- Reading device-specific keys.
- Switching device-specific LEDs.
- Reading total operating hours.
- Reading operating elements.


Supported operating systems:
- Windows 10 IoT Enterprise 2016 LTSB (64-bit)


----------------------------------------------------------------
Version 1.1 / 2017-08-22 / PAM
----------------------------------------------------------------

Updates

- ADI DLL (BrAdi.dll) 4.10
- Control Center (BrCtrlCenter.exe) 4.1

Error corrections

Control Center:
- If the display brightness was changed by another program, the
slider for the brightness was not updated. The brightness from
the start of the program is set if the Control Center is exited
with "Cancel".

Changes

Control Center:
- Support for SDL4 statistical and firmware values.
- Support for USB Enable on Automation Panels.
- Support for ISIO module (5AC901.ISIO-00).
- Low-resolution temperatures and operating times are now shown
with two decimal places.
- Sensor numbers for temperatures and fans now begin with 1
instead of 0 to match the manual.
- Updated company name.

ADI DLL:
- Support for SDL4 statistical and firmware values.
New values:
- ADI_STAT_HDBT_MSE_A
- ADI_STAT_HDBT_MSE_B
- ADI_STAT_HDBT_MSE_C
- ADI_STAT_HDBT_MSE_D
- ADI_STAT_PANEL_HDBT_MSE_A
- ADI_STAT_PANEL_HDBT_MSE_B
- ADI_STAT_PANEL_HDBT_MSE_C
- ADI_STAT_PANEL_HDBT_MSE_D
- ADI_STAT_HDBT_MAX_ERROR_A
- ADI_STAT_HDBT_MAX_ERROR_B
- ADI_STAT_HDBT_MAX_ERROR_C
- ADI_STAT_HDBT_MAX_ERROR_D
- ADI_STAT_PANEL_HDBT_RETRANSMISSION_RATE
- ADI_FIRMWARE_HDBT_VERSION
- ADI_FIRMWARE_PANEL_HDBT_VERSION
- Support for USB Enable on Automation Panels.
New values:
- ADI_HARDWARE_PANEL_USB0_ENABLE
- ADI_HARDWARE_PANEL_USB1_ENABLE
- ADI_HARDWARE_PANEL_USB2_ENABLE
- ADI_HARDWARE_PANEL_USB3_ENABLE
- ADI_HARDWARE_PANEL_USB4_ENABLE
- Support for ISIO module (5AC901.ISIO-00).
New value:
- ADI_MODULE_HARDWARE_RDY_STATE
- Updated company name.

Installer:
- Updated company name.
Version Language
Operating System
Date
Size
Type Download
1.0 * Windows10 12/05/2017 6 MB ZIP ADI Driver V1.0.zip
Description ADI driver universal (Win10 64-bit)


----------------------------------------------------------------
GENERAL
----------------------------------------------------------------

The Automation Device Interface (ADI) driver enables access to
specific functions of B&R devices.

This version supports the device families:
- Automation PC 910 (APC910)
- Automation PC 2100 (APC2100)
- Automation PC 3100 (APC3100)
- Panel PC 900 (PPC900)
- Panel PC 2100 (PPC2100)
- Panel PC 3100 (PPC3100)
and connected:
- Automation Panel 800 (AP800)
- Automation Panel 830 (AP830)
- Automation Panel 900 (AP900)
- Automation Panel 9x3 (AP9x3)
- Automation Panel 9xD (AP9xD)
- Automation Panel 1000 (AP1000)
- Automation Panel 5000 (AP5000)

Settings for these devices can be displayed and modified using the
Control Center applet in the Control Panel.
Note: Some settings may be disabled depending on the B&R device
being used.

Some functions of the ADI driver:
- Changing the display brightness.
- Reading device-specific keys.
- Switching device-specific LEDs.
- Reading total operating hours.
- Reading operating elements.


Supported operating systems:
- Windows 10 IoT Enterprise 2016 LTSB (64-bit)


----------------------------------------------------------------
Version 1.0 / 2017-04-27 / PAM
----------------------------------------------------------------

First version.
Back to list

Please choose country and language

B&R Logo

Please choose country

B&R Logo