Please choose country and language

Short description
Communication module 1x X2X Link master, 1x POWERLINK (V1/V2) managing or controlled node
General information
Ready relay Normally open and normally closed contact, max. 30 VDC, max. 6 A
Status indicators Status of the POWERLINK station, network activity, link/collision for IF2
Diagnostics
Bus function (IF2) Yes, using LED status indicators and software
Data transfer (IF1) Yes, using software
Station status (IF2) Yes, using LED status indicators and software
Power consumption 4.0 W
Electrical isolation
IF1 - IF2 Yes
PC - IFx Yes
Certifications
CE Yes
UL cULus E115267
Industrial control equipment
GOST-R Yes
Controller
SRAM 1 MB, battery-backed
Interfaces
Interface IF1
Fieldbus X2X Link master
Design 4-pin male multipoint connector
Distance between 2 stations Max. 100 m
Interface IF2
Fieldbus POWERLINK (V1/V2) managing or controlled node
Type Type 3
Design 1x shielded RJ45 port
Cable length Max. 100 m between two stations (segment length)
Transfer rate 100 Mbit/s
Transfer
Physical layer 100BASE-TX
Half-duplex Yes
Full-duplex POWERLINK mode: No / Ethernet mode: Yes
Autonegotiation Yes
Auto-MDI / MDIX Yes
Operating conditions
Degree of protection per EN 60529 IP20 when installed
Environmental conditions
Temperature
Operation 0 to 55°C
Storage -25 to 70°C
Relative humidity
Operation 0 to 95%, non-condensing
Mechanical properties
Note Order 2x TB704 terminal blocks separately
Lithium battery included in delivery
Slot Standard PCI half-size module, Plug & Play
Installation in
B&R Automation PC Yes
B&R Panel PC Yes
Desktop PC Yes
Kod towaru:
5LS189.6-1
Opis:
  • POWERLINK
  • X2X Link connection
Logic scanner, PCI half-size module, 1 POWERLINK (V1/V2) interface, managing or controlled node, 1 X2X Link master interface, electrically isolated, 1 MB SRAM (Automation Runtime), order 2x TB704 terminal blocks separately
Wymagane akcesoria
Terminal blocks
0TB704.9 Accessory terminal block, 4-pin, screw clamp terminal block 2.5 mm²
0TB704.91 Accessory terminal block, 4-pin, push-in terminal block 2.5 mm²
Dodatkowe akcesoria
Batteries
0AC201.91 Lithium batteries 4 pcs., 3 V / 950 mAh button cell
4A0006.00-000 Lithium battery, 3 V / 950 mAh, button cell
Automation Studio HW Upgrades Version (Date) Download
V2.7 HW Upgrade (5LS189.6-1) / 630 KB
V3.0 HW Upgrade (5LS189.6-1) / 630 KB
V4.0 HW Upgrade (5LS189.6-1) / 529 KB

Please choose country and language

B&R Logo