General information
LEDs Status, SDL4 Out 0, SDL4 Out 1, SDL4 Out 2
B&R ID code 0xF10D
Certifications
CE Yes
UKCA Yes
UL cULus E115267
Industrial control equipment
Interfaces
USB
Quantity 1
Type USB 2.0
Variant Type B
Transfer rate Low speed (1.5 Mbit/s), full speed (12 Mbit/s) to high speed (480 Mbit/s)
SDL/DVI-D interface
Variant DVI-I
Type SDL/DVI
SDL4 Out
Quantity 3
Variant Female RJ45 connector, shielded
Type SDL4
Electrical properties
Nominal voltage 24 VDC ±25%, SELV
Nominal current Max. 0.5 A
Overvoltage category per EN 61131-2 II
Galvanic isolation Yes
Operating conditions
Pollution degree per EN 61131-2 Pollution degree 2
Degree of protection per EN 60529 IP20
Ambient conditions
Temperature
Operation 0 to 45°C
Storage -20 to 60°C
Transport -20 to 60°C
Relative humidity
Operation 5 to 90%, non-condensing
Storage 5 to 95%, non-condensing
Transport 5 to 95%, non-condensing
Vibration
Operation (continuous) 2 to 9 Hz: 1.75 mm amplitude / 9 to 200 Hz: 0.5 g peak
Operation (occasional) 2 to 9 Hz: 3.5 mm amplitude / 9 to 200 Hz: 1 g peak
Storage 2 to 8 Hz: 7.5 mm amplitude / 8 to 200 Hz: 2 g peak / 200 to 500 Hz: 4 g peak
Transport 2 to 8 Hz: 7.5 mm amplitude / 8 to 200 Hz: 2 g peak / 200 to 500 Hz: 4 g peak
Shock
Operation 15 g peak, 11 ms
Storage 30 g peak, 6 ms
Transport 30 g peak, 6 ms
Elevation
Operation Max. 3000 m
Mechanical properties
Housing
Material Aluminum
Coating White
Dimensions
Width 49 mm
Height 100 mm
Depth 80 mm
Weight Approx. 500 g
Materiaalnummer:
5COSD4.1001-00
Omschrijving:

The SDL4 Converter makes operation via SDL4 with Automation Panels possible for B&R industrial PCs that are not equipped with an SDL4 interface or SDL4 slot. In addition, up to 3 Automation Panels can be connected to the 3-port SDL4 Converter in clone mode.

When combined with an SDL4 interface integrated on a B&R industrial PC, an additional Automation Panel can be connected in dual-independent display mode.

Vereiste toebehoren
Accessories
0TB103.9 Connector 24 VDC - 3-pin, female - Screw clamp terminal block 3.31 mm²
0TB103.91 Connector 24 VDC - 3-pin, female - Cage clamp terminal block 3.31 mm²
SDL-cables
5CASDL.0008-00 SDL cable - 0.8 m
5CASDL.0018-00 SDL cable - 1.8 m
5CASDL.0050-00 SDL cable - 5 m
5CASDL.0060-00 SDL cable - 6 m
5CASDL.0100-00 SDL cable - 10 m
SDL3/SDL4/PoE cables
5CASD3.0010-00 SDL3/SDL4/FT50 cable - 1 m - FT50 including Power over Ethernet
5CASD3.0030-00 SDL3/SDL4/FT50 cable - 3 m - FT50 including Power over Ethernet
5CASD3.0050-00 SDL3/SDL4/FT50 cable - 5 m - FT50 including Power over Ethernet
5CASD3.0070-00 SDL3/SDL4/FT50 cable - 7 m - FT50 including Power over Ethernet
5CASD3.0100-00 SDL3/SDL4/FT50 cable - 10 m - FT50 including Power over Ethernet
5CASD3.0150-00 SDL3/SDL4/FT50 cable - 15 m - FT50 including Power over Ethernet
5CASD3.0200-00 SDL3/SDL4/FT50 cable - 20 m - FT50 including Power over Ethernet
5CASD3.0300-00 SDL3/SDL4/FT50 cable - 30 m - FT50 including Power over Ethernet
5CASD3.0500-00 SDL3/SDL4/FT50 cable - 50 m - FT50 including Power over Ethernet
5CASD3.1000-00 SDL3/SDL4/FT50 cable - 100 m - FT50 including Power over Ethernet
Optionele toebehoren
Accessories
5ACCRHMI.0011-000 Strain relief USB - For APC2100/APC2200 - For SDL3 Converter/SDL4 Converter
DVI cables
5CADVI.0018-00 DVI-D cable - 1.8 m
5CADVI.0050-00 DVI-D cable - 5 m
Other
5ACCRHMI.0000-000 HMI grounding clip
SDL cables with 45° connector
5CASDL.0018-01 SDL cable - 45-degree connector - 1.8 m
5CASDL.0050-01 SDL cable - 45-degree connector - 5 m
5CASDL.0100-01 SDL cable - 45-degree connector - 10 m
SDL flex cables
5CASDL.0018-03 SDL flex cable - 1.8 m
5CASDL.0050-03 SDL flex cable - 5 m
5CASDL.0100-03 SDL flex cable - 10 m
USB cables
5CAUSB.0018-00 USB 2.0 connection cable - Type A - type B connector - 1.8 m
5CAUSB.0050-00 USB 2.0 connection cable - Type A - type B connector - 5 m
Documentatie Versie (Datum) Download
SDL4 Converter user's manual PDF / 4 MB
Firmware Upgrades Versie (Datum) Download
Automation Panel FW Upgrade (Autom. Panel, SDL3 and SDL4 converter) ZIP / 3 MB
M-CAD (Mechan. Templates) Versie (Datum) Download
3D files DXF/STP 5COSD4.1001-00 ZIP / 1 MB

Graag land en taal kiezen

B&R Logo