Short description
I/O module | 2 counter channels, 2 analog outputs |
General information
Status indicators | Up/down counter, referencing, potential offset current between the analog outputs |
Diagnostics | |
Compensation current | Yes, using status LED and software status |
Homing | Yes, using status LED and software status |
Power consumption | |
24 VDC | 3.5 W |
5 VDC | 1.5 W |
Total | 5.0 W |
Electrical isolation | |
Output - Output | No |
Output - Encoder | Yes |
Output - PLC | Yes |
Encoder - Encoder | No |
Encoder - PLC | Yes |
Certifications | |
CE | |
UL | |
EAC | Yes |
Counter channels
Variant | Two 9-pin DSUB sockets |
Evaluation | 1x, 2x, 4x |
Operating modes | Incremental or up/down counter configurable using software |
Input filter | 2 times configurable using software |
Input frequency | Max. 100 kHz |
Encoder inputs | Symmetric and asymmetric |
Encoder power supply | 5 to 30 V external |
Counter size | 32-bit |
Analog outputs
Operating conditions
Degree of protection per EN 60529 | IP20 |
Ambient conditions
Temperature | |
Operation | 0 to 60°C |
Storage | -25 to 70°C |
Relative humidity | |
Operation | 5 to 95% |
Mechanical properties
Note | 8-pin terminal block is included in the delivery |
Dimensions | |
Width | System 2005 single-width |
Can be installed on | |
Base unit | Yes |
Expansion unit | Yes |
Materiaalnummer:
3NC150.6Omschrijving:
2005 counter module, 2 inputs for incremental encoder, 32-bit, input frequency 100 kHz, encoder supply 5 to 30 VDC, 2 analog outputs ±10 V, 12-bit; 8-pin terminal block is included in delivery.
Documentatie | Versie (Datum) | Download |
---|---|---|
Datasheet 3NC150.6 | PDF / 845 KB |