Short description
Stepper motor Stepper motor flange size 87.1 mm, length 130 mm
General information
Certifications
CE Yes
Specific motor data
Wiring
Serial true
Parallel true
Current
Series wiring 3 A
Parallel wiring 6 A
Resistance/Phase
Series wiring 2.7 Ω
Parallel wiring 0.7 Ω
Inductance/Phase
Series wiring 20.0 mH
Parallel wiring 5.0 mH
Stall torque 9.3 Nm
Holding torque 13.6 Nm
Detent torque <420 mNm
Rotor inertia Approx. 3.92 kgcm2
General motor data
Protection class IP40
Stepping angle 1.8°
Max. surface temperature 100°C
Average period of operation between failures 20,000 hours
Cable length 300 mm
Cable cross section 22 AWG, UL 3266
Shaft type With key
Insulation class B (130°C)
Insulation resistance 100 MΩ min. 500 VDC
Dielectric resistance 1776 VAC for 1 minute
Driver supply voltage Max. 80 VDC
Ambient conditions
Temperature
Operation -20 to 40°C
Storage -30 to 85°C
Transport -30 to 85°C
Relative humidity
Operation 5 to 95%, non-condensing
Storage 5 to 95%, non-condensing
Transport 5 to 95%, non-condensing
Mechanical properties
Max. radial load 290 N
Max. axial load 225 N
Weight 4.2 kg
Length 130 mm
Materiaalnummer:
80MPH6.300S000-01
Omschrijving:
2-phase hybrid stepper motor, 87.1 mm flange, length 130 mm, 3 A serial / 6 A parallel, 13.6 Nm holding torque, 9.3 Nm stall torque
Optionele toebehoren
Accessories
80XMPHXRE.W1-10 IP expansion and wiring clamp for stepper motors in the 80MPH series, IP65, 10 units per package

Graag land en taal kiezen

B&R Logo