5MP7140.070N-000

General information

Support
mapp View	Recommended widget class: A (see also section "Software-specific information")
Certifications
CE	Yes
CRA (Cyber Resilience Act)	Evaluation ongoing
UL	cULus E115267 Industrial control equipment
KC	Yes

Controller

Processor
Type	ARM Cortex-A9 i.MX6
Clock frequency	1000 MHz
Flash	4 GB
Standard memory
RAM	1 GB DDR3

Display

Type	TFT color
Diagonal	7.0"
Colors	16.7 million
Resolution	WSVGA, 1024 x 600 px
Contrast	500:1
Viewing angles
Horizontal	Direction R = 75° / Direction L = 75°
Vertical	Direction U = 70 to 75° / Direction D = 70 to 75°
Backlight
Brightness	320 cd/m²
Half-brightness time	20,000 h
Touch screen
Technology	Analog, resistive

Interfaces

USB
Quantity	1
Type	USB 2.0
Variant	Type A
Transfer rate	Low speed (1.5 Mbit/s), full speed (12 Mbit/s) to high speed (480 Mbit/s)
Current-carrying capacity	Max. 500 mA
Ethernet
Quantity	1
Variant	RJ45, shielded
Transfer rate	10/100 Mbit/s
Max. baud rate	100 Mbit/s

Keys

System keys	20 numeric keys, cursor block
Stop button	Yes (2 normally closed contacts)
Enable switch	Yes (3-position button)
Key switch	Yes
LEDs	5

Operating system

Edition	mapp View and VNC client
Architecture	ARM
Language	English
Preinstallation	Yes

Electrical properties

Nominal voltage	24 VDC ±25% (integrated reverse polarity protection), SELV
Inrush current	Max. 5.6 A (current limiting available)
Power consumption	12 W (500 mA at 24 VDC)
Max. interruption of power supply	≤10 ms

Operating conditions

Drop height	1.5 m to industrial floor, then at least IP54 protection
Flame-retardant	UL 94 / V-0
Degree of protection per EN 60529	IP65
Protection class	Class 3 per EN 61131-2 and EN 50178

Ambient conditions

Temperature
Operation	0 to 45°C
Storage	-20 to 70°C
Transport	-20 to 70°C
Relative humidity
Operation	5 to 95%, non-condensing
Storage	5 to 95%, non-condensing
Transport	5 to 95%, non-condensing
Vibration
Operation	5 to 8.4 Hz: 3.5 mm amplitude / 8.4 to 150 Hz: 1 g
Shock
Operation	15 g, 11 ms
Elevation
Operation	Max. 2000 m

Mechanical properties

Housing
Material	ABS
Front
Panel overlay
Material	Polyester
Dimensions
Width	212 mm
Height	251 mm
Depth	73 mm (with stop button)
Weight	Approx. 950 g

Materiaalnummer:

5MP7140.070N-000

Omschrijving:

7.0" TFT WSVGA color display
Single-touch (analog resistive)
Freescale i.MX6 single core 1 GHz
20 system keys
Stop button
3-position enable switch
Key switch

Mobile Panel 7100 7.0" WSVGA TFT - 600 x 1024 pixels - Single-touch (analog resistive) - Cortex-A9 processor - For mapp View and VNC - 1x Ethernet 10/100, 1x USB 2.0 - 1x key switch - 1x stop button - 1x enable switch - 20x system keys, 5x LEDs

Vereiste toebehoren

Attachment cables

5CAMPH.0018-40	Attachment cable for MP7100 and MP7200 - Push-Pull circular connector - 1.8 m
5CAMPH.0050-40	Attachment cable for MP7100 and MP7200 - Push-Pull circular connector - 5 m
5CAMPH.0100-40	Attachment cable for MP7100 and MP7200 - Push-Pull circular connector - 10 m
5CAMPH.0150-40	Attachment cable for MP7100 and MP7200 - Push-Pull circular connector - 15 m
5CAMPH.0200-40	Attachment cable for MP7100 and MP7200 - Push-Pull circular connector - 20 m

Control cabinet cables

5CAMPC.0020-10	Mobile Panel control cabinet cable - Push-Pull circular connector - Ethernet crossover - 2 m
5CAMPC.0020-11	Mobile Panel control cabinet cable - Push-Pull circular connector - Ethernet straight-through - 2 m

mapp View and VNC Client

5SWVIS.MP46-ENG	mapp View and VNC client - English - For MP7140 - Installation (without Recovery DVD) - Only available with a new device

Optionele toebehoren

Accessories

4MPCBX.0000-00	Mobile Panel connection box - For cables with push-pull circular connectors
4MPCBX.0001-00	Mobile Panel small connection box - For cables with push-pull circular connectors
5ACCWB40.0000-000	Mobile Panel 7100 wall mount - For MP7140
5CAMPB.0050-10	Mobile Panel box cable - With wire end sleeves - With connector contacts - 5 m
5CAMPB.0100-10	Mobile Panel box cable - With wire end sleeves - With connector contacts - 10 m

Automation Studio HW Upgrades	Versie (Datum)	Download
V4.2 HW Upgrade (5MP7140.070N-000)		EXE / 443 KB Login voor downloaden
V4.3 HW Upgrade (5MP7140.070N-000)		EXE / 547 KB Login voor downloaden

Certificaten	Versie (Datum)	Download
TÜV certificate - safety function of the connection box 4MPCBX.0000-000		PDF / 665 KB Login voor downloaden

Documentatie	Versie (Datum)	Download
Mobile Panel 7100 Device number key		PDF / 196 KB Login voor downloaden
Mobile Panel 7100 User's manual		PDF / 19 MB Login voor downloaden

E-CAD (Electro of EPLAN Templates)	Versie (Datum)	Download
Panel EPLAN P8 from V2.4		EXE / 67 MB Login voor downloaden

M-CAD (Mechan. Templates)	Versie (Datum)	Download
3D file STEP 5ACCWB40.0000-000		ZIP / 11 KB Login voor downloaden
3D file STEP 5MP7140.070N-xxx		ZIP / 3 MB Login voor downloaden