4MP181.0843-03

General information
Battery
Type -
Service life -
Removable -
Variant -
Certifications
CE Yes
UKCA Yes
UL cULus E115267
Industrial control equipment
Controller
Bootloader Automation Runtime
Processor
Type Geode SC2200
Clock frequency 266 MHz
L1 cache 16 kB
L2 cache No
Floating point unit (FPU) Yes
MMX-compatible Yes
Mode/Node switches 2, 16 positions each (back)
Watchdog No
Real-time clock
Accuracy Typ. 20 ppm (1.7 seconds) per day
Battery-backed No
Graphics
Controller Geode SC2200
Memory 4 MB shared memory (reserved by main memory)
SRAM
Size -
Battery-backed -
Display
Type TFT color
Diagonal 8.4" (213.4 mm)
Colors 256
Resolution VGA, 640 x 480 pixels
Contrast 250:1
Viewing angles
Horizontal Direction R / Direction L = 55°
Vertical Direction U = 55° / Direction D = 40°
Backlight
Brightness 120 cd/m²
Half-brightness time 50,000 h
Filter glass
Transmittance -
Anti-glare coating -
Touch screen
Type AMT
Technology Analog, resistive
Controller Hampshire, serial, 12-bit
Transmittance Up to 78%
Interfaces
COM1
Type RS232, modem supported, not galvanically isolated
Variant 9-pin male DSUB connector
UART 16550-compatible, 16-byte FIFO buffer
Max. baud rate 115 kbit/s
CompactFlash slot 1
Type Type I
Connection Primary IDE
USB
Quantity 1
Type USB 1.1
Variant Type A
Transfer rate Low speed (1.5 Mbit/s), full speed (12 Mbit/s)
Ethernet
Quantity 1
Controller MacPhyter DP83816
Transfer rate 10/100 Mbit/s
Max. baud rate 100 Mbit/s
CAN
Quantity -
Controller -
Connection -
Keys
Function keys No
Soft keys No
System keys Numeric keys
4 system keys
3-axis joystick No
Electronic handwheel No
Illuminated pushbutton No
Emergency switch-off 2 normally closed contacts, right position
Enable switch 3-position, 2-channel, position on front of handle
Override potentiometer No
Key switch Yes
Service life >1,000,000 actuations at 1 ±0.3 N to 3 ±0.3 N actuating force
LEDs No
Electrical properties
Nominal voltage 24 VDC ±25% (integrated reverse polarity protection)
Inrush current Max. 20 A for ca. 1 ms
Power consumption Typ. approx. 8 W, max. 10 W
Galvanic isolation No
Operating conditions
Drop height 1 m to industrial floor
Flame-retardant UL 94 V-0
Degree of protection per EN 60529 IP54 protected against dust and splashed water (only with handle 4MPHDL.0000-00)
Ambient conditions
Temperature
Operation 0 to 45°C
Storage -20 to 70°C
Transport -20 to 70°C
Vibration
Operation (continuous) 2 to 9 Hz: 1.75 mm amplitude / 9 to 200 Hz: 0.5 g
Operation (occasional) 2 to 9 Hz: 3.5 mm amplitude / 9 to 200 Hz: 1 g
Storage 2 to 8 Hz: 7.5 mm amplitude / 8 to 200 Hz: 2 g / 200 to 500 Hz: 4 g
Transport 2 to 8 Hz: 7.5 mm amplitude / 8 to 200 Hz: 2 g / 200 to 500 Hz: 4 g
Shock
Operation 15 g, 11 ms
Storage 30 g, 15 ms
Transport 30 g, 15 ms
Elevation
Operation Max. 2000 m
Mechanical properties
Housing
Material Double-walled plastic housing (Cycoloy C2950)
Coating Soft paint, similar to RAL 7016
Front
Design Gray
Panel overlay
Material Polyester
Light background color Similar to Pantone 427CV
Dark gray keys color Similar to Pantone 431CV
Orange keys color Similar to Pantone 151CV
Gasket Flat gasket around display front
Dimensions
Width 306.6 mm
Height 76 mm
Depth 270.6 mm
Weight Approx. 1900 g
Materiaalnummer:
4MP181.0843-03
Omschrijving:
Mobile Panel MP181 control device, 8.4" VGA color TFT display with touch screen (resistive), 19 system keys, key switch and emergency switch-off. 64 MB SDRAM, CompactFlash slot (type I), ETH 10/100, USB 1.1, 24 VDC. Order handle and cables separately.
Vereiste toebehoren
Attachment cables
5CAMPH.0018-10 MP100/200 attachment cable with push-pull circular connector for the control cabinet cable, 1.8 m.
5CAMPH.0050-00 Mobile Panel attachment cable, 5 m.
5CAMPH.0050-10 MP100/200 attachment cable with push-pull circular connector for the control cabinet cable, 5 m.
5CAMPH.0070-00 Mobile Panel attachment cable, 7 m
5CAMPH.0100-00 Mobile Panel attachment cable, 10 m.
5CAMPH.0100-10 MP100/200 attachment cable with push-pull circular connector for the control cabinet cable, 10 m.
5CAMPH.0150-00 Mobile Panel attachment cable, 15 m.
5CAMPH.0150-10 MP100/200 attachment cable with push-pull circular connector for the control cabinet cable, 15 m.
5CAMPH.0200-00 Mobile Panel attachment cable, 20 m.
5CAMPH.0200-10 MP100/200 attachment cable with push-pull circular connector for the control cabinet cable, 20 m.
Control cabinet cables
5CAMPC.0020-00 Mobile Panel control cabinet cable Ethernet crossover, 2 m.
5CAMPC.0020-01 Mobile Panel control cabinet cable Ethernet straight-through, 2 m.
Handles
4MPHDL.0000-00 Mobile Panel handle, with integrated 3-position enable switch.
Optionele toebehoren
Accessories
4MPBRA.0000-00 MP100/200 wall mount.
4MPBYP.0000-00 Mobile Panel lock pull bypass connector for control cabinet cable 5CAMPC.0020-00, 5CAMPC.0020-01.
5AC900.1100-00 Touch screen stylus pen , 5 pcs.
CompactFlash cards
5CFCRD.0064-03 CompactFlash 64 MB Western Digital (SLC)
5CFCRD.0128-03 CompactFlash 128 MB Western Digital (SLC)
5CFCRD.0256-03 CompactFlash 256 MB Western Digital (SLC)
5CFCRD.0512-03 CompactFlash 512 MB Western Digital (SLC)
5CFCRD.1024-03 CompactFlash 1 GB Western Digital (SLC)
5CFCRD.2048-03 CompactFlash 2 GB Western Digital (SLC)
5CFCRD.4096-03 CompactFlash 4 GB Western Digital (SLC)
5CFCRD.8192-03 CompactFlash 8 GB Western Digital (SLC)
USB accessories
5MMUSB.2048-01 USB 2.0 flash drive 2048 MB B&R
Automation Studio HW Upgrades Versie (Datum) Download
V4.1 HW Upgrade (4MP181.0843-03) EXE / 522 KB
Documentatie Versie (Datum) Download
Dimensions pdf 4MP181.0843-03 PDF / 1 MB
Mobile Panel 100/200 User's Manual PDF / 14 MB
E-CAD (Electro of EPLAN Templates) Versie (Datum) Download
Panel EPLAN P8 from V2.4 EXE / 67 MB
M-CAD (Mechan. Templates) Versie (Datum) Download
3D file DXF/STEP 4MP181.0843-03, 4MP281.0843-13, 5MP181.0843-07 ZIP / 9 MB

Graag land en taal kiezen

B&R Logo