• Website
  • Model Number
  • Serial number
Logged in as UsernameLogout
B&R Logo
  • Specifications

  • Basic Information

  • Accessories

  • Downloads

  • Revisions

  • Serial number

    Communication module1x X2X Link master, 1x POWERLINK (V1/V2) managing or controlled node
    Ready relayNormally open and normally closed contact, max. 30 VDC, max. 6 A
    Status indicatorsStatus of the POWERLINK station, network activity, link/collision for IF2
    Bus function (IF2)Yes, using LED status indicators and software
    Data transfer (IF1)Yes, using software
    Station status (IF2)Yes, using LED status indicators and software
    Power consumption4.0 W
    Electrical isolation
    IF1 - IF2Yes
    PC - IFxYes
    ULcULus E115267
    Industrial control equipment
    SRAM1 MB, battery-backed
    Interface IF1
    FieldbusX2X Link master
    Design4-pin male multipoint connector
    Distance between 2 stationsMax. 100 m
    Interface IF2
    FieldbusPOWERLINK (V1/V2) managing or controlled node
    TypeType 3
    See the POWERLINK help system under "General information, Hardware - IF/LS".
    Design1x shielded RJ45 port
    Cable lengthMax. 100 m between two stations (segment length)
    Transfer rate100 Mbit/s
    Physical layer100BASE-TX
    Full-duplexPOWERLINK mode: No / Ethernet mode: Yes
    Auto-MDI / MDIXYes
    Degree of protection per EN 60529IP20 when installed
    Operation0 to 55°C
    Storage-25 to 70°C
    Relative humidity
    Operation0 to 95%, non-condensing
    NoteOrder 2x TB704 terminal blocks separately
    Lithium battery included in delivery
    SlotStandard PCI half-size module, Plug & Play
    Installation in
    B&R Automation PCYes
    B&R Panel PCYes
    Desktop PCYes


  • X2X Link connection
Product description:
Material number:
Logic scanner, PCI half-size module, 1 POWERLINK (V1/V2) interface, managing or controlled node, 1 X2X Link master interface, electrically isolated, 1 MB SRAM (Automation Runtime), order 2x TB704 terminal blocks separately
Terminal blocks
  • 0TB704.9

    Accessory terminal block, 4-pin, screw clamp terminal block 2.5 mm²

  • 0TB704.91

    Accessory terminal block, 4-pin, push-in terminal block 2.5 mm²

  • 0AC201.91

    Lithium batteries 4 pcs., 3 V / 950 mAh button cell

  • 4A0006.00-000

    Lithium battery, 3 V / 950 mAh, button cell

toggle all
This site uses cookies to enable a better customer experience. By continuing to browse the site you are agreeing to our use of cookies. Please find more information about cookies in our Privacy Policy.