Please choose country and language

Short description
Bus controller CAN I/O slave
General information
B&R ID code 0x1F1D
Status indicators Module status, bus function, data transfer, terminating resistor
Module status Yes, using status LED and software
Bus function Yes, using status LED
Data transfer Yes, using status LED
Terminating resistor Yes, using status LED
Power consumption
Bus 1.5 W
Additional power dissipation caused by actuators (resistive) [W] -
CE Yes
ATEX Zone 2, II 3G Ex nA nC IIA T5 Gc
IP20, Ta (see X20 user's manual)
FTZÚ 09 ATEX 0083X
UL cULus E115267
Industrial control equipment
HazLoc cCSAus 244665
Process control equipment
for hazardous locations
Class I, Division 2, Groups ABCD, T5
KC Yes
Fieldbus CAN I/O slave
Variant 5-pin male multipoint connector
Max. distance 1000 m
Transfer rate Max. 1 Mbit/s
Default transfer rate Automatic transfer rate detection or fixed rate setting
X2X Link cycle time Permanently set to 1 ms
Synchronization between bus systems possible No
Terminating resistor Integrated in the module
Electrical properties
Electrical isolation
CAN IO isolated from I/O

CAN IO not isolated from bus
Operating conditions
Mounting orientation
Horizontal Yes
Vertical Yes
Installation elevation above sea level
0 to 2000 m No limitations
>2000 m Reduction of ambient temperature by 0.5°C per 100 m
Degree of protection per EN 60529 IP20
Ambient conditions
Horizontal mounting orientation -25 to 60°C
Vertical mounting orientation -25 to 50°C
Derating -
Storage -40 to 85°C
Transport -40 to 85°C
Relative humidity
Operation 5 to 95%, non-condensing
Storage 5 to 95%, non-condensing
Transport 5 to 95%, non-condensing
Mechanical properties
Note Order 1x TB2105 terminal block separately
Order 1x X20TB12 terminal block separately
Order 1x X20PS9400 or X20PS9402 power supply module separately
Order 1x X20BB80 bus base separately
Pitch 37.5 +0.2 mm
  • Fieldbus: CAN bus
  • Automatic firmware update via the fieldbus
  • Integrated I/O access in B&R Automation Studio
  • Integrated terminating resistor

The bus controller makes it possible to connect X2X Link I/O nodes to CAN I/O. CAN I/O is a transfer protocol based on standard CAN bus that is fully integrated in the B&R system.

Up to 43 logic I/O modules can be connected to the bus controller. Up to 16 of them can be analog modules.

System modules for bus controllers
X20BB80 X20 bus base, for X20 base module (BC, HB, etc.) and X20 power supply module, X20 end plates (left and right) X20AC0SL1/X20AC0SR1 included
X20PS9400 X20 power supply module, for bus controller and internal I/O power supply, X2X Link power supply
X20PS9402 X20 power supply module, for bus controller and internal I/O power supply, X2X Link power supply, supply not electrically isolated
Terminal blocks
0TB2105.9010 Accessory terminal block, 5-pin, screw clamps 2.5 mm²
0TB2105.9110 Accessory terminal block, 5-pin, push-in terminal block 2.5 mm²
X20TB12 X20 terminal block, 12-pin, 24 VDC keyed
Automation Studio HW アップグレード Version (Date) Download
V2.6 HW Upgrade (X20BC0073) EXE / 1 MB
V2.6 HW Upgrade (X20BC0073a) EXE / 581 KB
V3.0 HW Upgrade (X20BC0073) EXE / 2 MB
V3.0 HW Upgrade (X20BC0073a) EXE / 581 KB
V4.0 HW Upgrade (X20BC0073) EXE / 1,006 KB
E-CAD (Electro or EPLAN Templates) Version (Date) Download
X20 EPLAN P8 from V2.4 EXE / 161 MB
M-CAD (Mechan. Templates) Version (Date) Download
3D File DXF/STEP X20 Bus Controller CAN/DeviceNet ZIP / 28 KB
Dimensions PDF X20 Bus Controller CAN/DeviceNet PDF / 4 KB
ドキュメンテーション Version (Date) Download
Data sheet X20BC0073 PDF / 221 KB
X20 System User´s Manual PDF / 50 MB
証明書 Version (Date) Download
244665 CSA HazLoc Certificate of Compliance X20, X67 PDF / 56 KB
E115267 UL CoC X20 PDF / 1 MB
FTZU 09 ATEX 0083X PDF / 697 KB

Please choose country and language

B&R Logo