Please choose country and language

Short description
Communication module PROFINET IO device (slave)
General information
B&R ID code 0xE238
Status indicators Module status, network status, data transfer
Module status Yes, using status LED and software
Network status Yes, using status LED and software
Data transfer Yes, using status LED
Power consumption 2 W
Additional power dissipation caused by actuators (resistive) [W] -
CE Yes
ATEX Zone 2, II 3G Ex nA nC IIA T5 Gc
IP20, Ta (see X20 user's manual)
FTZÚ 09 ATEX 0083X
UL cULus E115267
Industrial control equipment
HazLoc cCSAus 244665
Process control equipment
for hazardous locations
Class I, Division 2, Groups ABCD, T5
DNV GL Temperature: B (0 - 55°C)
Humidity: B (up to 100%)
Vibration: B (4 g)
EMC: B (bridge and open deck)
KR Yes
Fieldbus PROFINET IO device (slave)
PROFINET attributes
Conformance class C
Performance class RT (switch supports IRT)
Netload class III
Variant 2x shielded RJ45 (switch)
Line length Max. 100 m between 2 stations (segment length)
Transfer rate 100 Mbit/s
Physical layer 100BASE-TX
Half-duplex Yes
Full-duplex Yes
Autonegotiation Yes
Controller netX100
Electrical properties
Electrical isolation PLC isolated from PROFINET IO (IF1 and IF2)
Operating conditions
Mounting orientation
Horizontal Yes
Vertical Yes
Installation elevation above sea level
0 to 2000 m No limitations
>2000 m Reduction of ambient temperature by 0.5°C per 100 m
Degree of protection per EN 60529 IP20
Ambient conditions
Horizontal mounting orientation -25 to 60°C
Vertical mounting orientation -25 to 50°C
Derating -
Storage -40 to 85°C
Transport -40 to 85°C
Relative humidity
Operation Up to 100%, condensing
Storage 5 to 95%, non-condensing
Transport 5 to 95%, non-condensing
Mechanical properties
Slot In the X20c CPU and in the X20cBC1083 expandable bus controller
  • PROFINET IO device
  • Integrated switch for efficient cabling

The interface module works as a PROFINET IO device (slave). It can be operated in X20 CPUs or in expandable POWERLINK bus controller X20BC1083.

The interface has two female RJ45 connectors. Both connections lead to an integrated switch. This makes daisy-chain wiring for PROFINET IO easy.

Automation Studio HW アップグレード Version (Date) Download
V3.0 HW Upgrade (X20cIF10E3-1) EXE / 2 MB
V4.0 HW Upgrade (X20cIF10E3-1) EXE / 1 MB
E-CAD (Electro or EPLAN Templates) Version (Date) Download
X20 EPLAN P8 from V2.4 EXE / 161 MB
Fieldbus equipment description files Version (Date) Download
X20cIF10E3-1 GSD Package ZIP / 11 KB
M-CAD (Mechan. Templates) Version (Date) Download
3D File STEP/DXF X20 Module ZIP / 1 MB
ドキュメンテーション Version (Date) Download
Coated modules PDF / 60 KB
Data sheet X20(c)IF10E3-1 PDF / 2 MB
X20 System User´s Manual PDF / 50 MB
証明書 Version (Date) Download
244665 CSA HazLoc Certificate of Compliance X20, X67 PDF / 56 KB
DNV GL Type Approval Certificate - X20 / Power Panel T30 PDF / 164 KB
E115267 UL CoC X20 PDF / 1 MB
FTZU 09 ATEX 0083X PDF / 697 KB
KR Type Approval Certificate MIL39390-AC003 (X20 System) PDF / 758 KB

Please choose country and language

B&R Logo