Please choose country and language:

Short description
I/O module 3 digital inputs, 3 analog outputs, 3 encoders (SSI or ABR)
Interfaces 1x X2X Link slave
General information
B&R ID code 0x17D6
Power supply 24 VDC
Status indicators I/O function, status
Diagnostics
I/O function Yes, with LEDs
Status, X2X Yes, with status LED
Power supply Yes, with software status
Power consumption
With 5 V encoder power supply (600 mA) 7.5 W
Without encoder power supply 3 W
Electrical isolation
Encoder - 24 VDC/Digital Yes
Encoder - Encoder/Analog No
X2X Link - Digital/Analog Yes
X2X Link - Encoder Yes
Certifications
CE Yes
UL cULus E115267
Industrial control equipment
GOST-R Yes
Interfaces
User interface
Design 12-pin multipoint plug
Type X2X Link slave
Digital inputs
Quantity 3
Nominal voltage 24 VDC
Input voltage 24 VDC -25 % / +25 %
Input current at 24 VDC Approx. 5 mA
Input filter
Hardware Input 1: ≤100 µs
Input 2 and 3: ≤10 µs
Software ≤16 µs
Input circuit Sink
Additional functions -
Switching threshold
Low <5 V
High >15 V
SSI absolute encoder
Quantity 3
Counter size Max. 31-bit
Keying Gray, binary
Baud rate 400 kbit/s
Encoder power supply
5 VDC Module-internal, max. 300 mA per channel, max. 600 mA for all channels
24 VDC External, max. 300 mA per channel
ABR incremental encoder
Quantity 3
Counter size 32-bit
Input frequency Max. 400 kHz
Evaluation 4x
Signal form Square wave pulse
Counter frequency 1200 MHz
Analog outputs
Quantity 3
Output ±10 V
Digital converter resolution 11-bit + sign
Conversion time ≤300 µs for all channels
Switch on/off behavior Internal enable relay for booting and errors
Output protection Protection against wiring with supply voltage, short circuit protection
Output format
Data type INT
Voltage INT 0x8001 - 0x7FFF / 1 LSB = 0x0001 = 4.882 mV
Max. load per output ±10 mA (load ≥1 kΩ)
Power supply
Voltage range 24 VDC -25 % / +25 %
Operating conditions
Mounting orientation
Horizontal Yes
Vertical Yes
Degree of protection per EN 60529 IP20
Environmental conditions
Temperature
Operation 0 to 50°C
Storage -25 to 70°C
Transport -25 to 70°C
Relative humidity
Operation 5 to 95%, non-condensing
Storage 5 to 95%, non-condensing
Transport 5 to 95%, non-condensing
Mechanical properties
Note Order 1x TB712 terminal block separately
Order 2x TB718 terminal blocks separately
Installation On EN50022 compliant mounting rails or screw mounting
Weight 400 g
Module dimensions including mounting plates 170 x 80 x 30 mm (H x W x D)
Material number:
7XX410.50-1
Description:
  • 3 inputs for absolute and incremental encoder
  • 3 analog outputs
  • 3 digital inputs

Remote I/O module, 24 VDC, with X2X Link, electrically isolated, 3 absolute encoder or incremental encoder inputs, 3 digital inputs, 24 VDC, sink, 3 analog outputs, ±10 V, 2 bits, order 2x terminal block 7TB718 and 1x terminal block 7TB712 separately!

Mandatory Accessories
Terminal blocks
7TB712.9 Accessory terminal block, 12-pin, screw clamps 1.5 mm²
7TB712.91 Accessory terminal block, 12-pin, cage clamp terminal block 1.5 mm²
7TB718.9 Accessory terminal block, 18-pin, screw clamps 1.5 mm²
7TB718.91 Accessory terminal block, 18-pin, cage clamp terminal block 1.5 mm²
Optional Accessories
Documentation Version (Date) Download
CX / XX Users Manual / 7 MB
Compact I/O User's Manual / 12 MB
M-CAD (Mechan. Templates) Version (Date) Download
3D File STEP 7XX_7CX / 791 KB

Please choose country and language:

B&R Logo