Please choose country and language

General information
B&R ID code 0xB1D1
Configuration software Automation Studio (version 3.0.81 and higher) / SYCONnet
Certifications
CE Yes
EAC Product family certification
UL cULus E115267
Industrial control equipment
HazLoc cULus HazLoc E180196
Industrial control equipment
for hazardous locations
Class I, Division 2, Groups ABCD
Controller
Processor netX 100
Dual-port memory 64 kB
Fieldbus
Type CANopen master
Variant 9-pin, male, DSUB connector
Transfer rate 10 kbit/s to 1 Mbit/s
Slaves Max. 126
Cyclic data Max. 7168 bytes
SDO upload and download Max. 200 bytes/request
Emergency Consumer/Producer
Functions Node-/ Life Guard., Heartbeat, PDO Mapping, NMT Management, SYNC
PDO communication synchronized, remotely requested and event driven (change of state) max. 512 Rx/TxPDO
Electrical properties
Nominal voltage +3.3 V ±5%
Nominal current 650 mA
Ambient conditions
Temperature
Operation 0 to 55°C
Mechanical properties
Dimensions
Width 120 mm
Height 73.2 mm
Depth 18.5 mm
Slot Standard PCI half-size module, Plug & Play
Installation in
B&R Automation PC Yes
B&R Panel PC Yes
Desktop PC Yes
Material number:
5ACPCI.XCOM-00
Description:

The 5ACPCI.XCOM-00 is equipped with a CANopen master interface and can therefore be used as a master in a CANopen network. Data is exchanged via the dual port memory.

Automation Studio HW Upgrades Version (Date) Download
V3.0 HW Upgrade (5ACPCI.XCOM-00) EXE / 600 KB
V4.0 HW Upgrade (5ACPCI.XCOM-00) EXE / 518 KB
Documentation Version (Date) Download
B&R Hilscher Fieldbus cards PDF / 3 MB
Datasheet 5ACPCI.XCOM-00 PDF / 460 KB
E-CAD (Electro or EPLAN Templates) Version (Date) Download
APC EPLAN P8 from V2.4 EXE / 90 MB
Firmware Upgrades Version (Date) Download
Hilscher firmware (5ACPCI.XCOM-00) ZIP / 207 KB

Please choose country and language

B&R Logo