General information
Cable cross section 4x 1.5 mm² + 2x 2x 0.75 mm²
Durability Oil resistance per VDE 0472 Part 803 as well as standard hydraulic oils
Certification UL AWM style 20234, 80°C, 1000 V, E63216 and CSA AWM I/II A/B, 90°C, 1000 V, FT2 LL46064
Certifications
CE Yes
UL cULus E225616
Power conversion equipment
EAC Yes
Cable construction
Power lines
Quantity 4
Wire insulation Special thermoplastic material
Wire colors Black, brown, blue, yellow/green
Variant Tinned copper stranded wire
Cross section 1.5 mm²
Shield No
Stranding No
Signal line
Quantity 4
Wire insulation Special thermoplastic material
Wire colors White, white/red, white/blue, white/green
Variant Tinned copper stranded wire
Cross section 0.75 mm²
Shield Individually shielded in pairs, tinned copper braiding, optical coverage >85% and foil shield
Stranding White with white/red and white/blue with white/green
Cable stranding With filler elements and foil shield
Cable shield Tinned copper braiding, optical coverage >85% and foil shield
Outer jacket
Material PUR
Color Orange, similar to RAL 2003 flat
Labeling BERNECKER & RAINER 4x1,5+2x2x0,75 FLEX
Connector
Type 8-pin female speedtec motor connector, size 1.0
Mating cycles <500
Contacts 8 (4 power and 4 signal contacts)
Degree of protection per EN 60529 IP67 when connected
Electrical properties
Operating voltage Max. 1000 V
Test voltage
Wire - Wire 1500 VAC
Wire - Shield 1500 VAC
Conductor resistance
Power lines ≤0.07 Ω
Signal line ≤0.09 Ω
Insulation resistance >40 GΩ
Current-carrying capacity per DIN VDE 0298 part 4, table 11
Wall mounting 20 A
Installed in conduit or cable duct 17.8 A
Installed in cable tray 20.9 A
Ambient conditions
Temperature
Moving -10 to 70°C
Static -20 to 90°C
Mechanical properties
Dimensions
Length 14 m
Diameter 12.8 mm ±0.4 mm
Bend radius
Single bend >40 mm
Moving ≥99 mm
Drag chain data
Acceleration <60 m/s²
Flex cycles ≥3,000,000
Velocity ≤4 m/s
Weight 4.00 kg
Numero materiale:
8CM014.12-1
Descrizione:
Motor cable, length 14 m, 4x 1.5 mm² + 2x 2x 0.75 mm², 8-pin female Intercontec motor connector size 1, can be used in cable drag chains
Documentazione Versione (data) Download
Datasheet 8CM014.12-1 PDF / 163 KB

Si prega di scegliere il Paese e la lingua

B&R Logo