Please choose country and language

Short description
Bus receiver X2X Link bus receiver
General information
B&R ID code 0xB0E4
Status indicators Operating state, module status
Diagnostics
Module run/error Yes, using LED status indicator and software
Overload Yes, using LED status indicator and software
Power consumption
External I/O 500 mW
Additional power dissipation caused by actuators (resistive) [W] -
Electrical isolation
X2X Link - Frequency inverter Yes
Certifications
CE Yes
UL UL E225616
Power conversion equipment
CSA CSA E272421
Industrial control equipment
Operating conditions
Mounting orientation
Vertical Yes
Installation elevation above sea level
0 to 2000 m No limitation
>2000 m Reduction of ambient temperature by 0.5°C per 100 m
Degree of protection per EN 60529 IP20
Ambient conditions
Temperature
Operation -10 to 60°C
Storage -40 to 85°C
Transport -40 to 85°C
Relative humidity
Operation 5 to 95%, non-condensing
Storage 5 to 95%, non-condensing
Transport 5 to 95%, non-condensing
Mechanical properties
Note Terminal blocks must be ordered separately.
2x 8TB2104.2010-00 (corresponds to 0TB704.9) or
2x 8TB2104.2210-00 (corresponds to 0TB704.91) or
1x 8TB2108.2010-00 or
1x 8TB2108.2210-00
Material number:
8I0IF109.400-2
Description:

2x X2X Link interface, interface module for ACOPOSinverter P64new

X2X Link communication cards available in following packages:

  • 8I64S200018.0X-000
  • 8I64S200037.0X-000
  • 8I64S200055.0X-000
  • 8I64S200075.0X-000
  • 8I64S200110.0X-000
  • 8I64S200150.0X-000
  • 8I64S200220.0X-000
  • 8I64T200018.0X-000
  • 8I64T200037.0X-000
  • 8I64T200055.0X-000
  • 8I64T200075.0X-000
  • 8I64T200110.0X-000
  • 8I64T200150.0X-000
  • 8I64T200220.0X-000
  • 8I64T200300.0X-000
  • 8I64T200400.0X-000
  • 8I64T200550.0X-000
  • 8I64T200750.0X-000
  • 8I64T201100.0X-000
  • 8I64T201500.0X-000
  • 8I64T400037.0X-000
  • 8I64T400055.0X-000
  • 8I64T400075.0X-000
  • 8I64T400110.0X-000
  • 8I64T400150.0X-000
  • 8I64T400220.0X-000
  • 8I64T400300.0X-000
  • 8I64T400400.0X-000
  • 8I64T400550.0X-000
  • 8I64T400750.0X-000
  • 8I64T401100.0X-000
  • 8I64T401500.0X-000
Optional Accessories
Terminal blocks
8TB2104.2010-00 4-pin screw clamp, single row, spacing: 5.08 mm, label 1: numbered serially
8TB2108.2010-00 8-pin screw clamp, single row, spacing: 5.08 mm, label 1: numbered serially
8TB2108.2210-00 Push-in terminal block 8-pin, 1-row, spacing: 5.08 mm, label 1: numbered consecutively
Terminals
8TB2104.2210-00 Push-in terminal block 4-pin, 1-row, pitch: 5.08 mm, label 1: numbered consecutively

Please choose country and language

B&R Logo