Please choose country and language

General information
Module type ACOPOS plug-in module
B&R ID code 0xBD5A
Slot Slots 2, 3 and 4
Max. power consumption 5.8 W
Certifications
CE Yes
UL cULus E225616
Power conversion equipment
KC Yes
Encoder connection
Module-side connection 9-pin female DSUB
Status indicators UP/DN LEDs
Electrical isolation
Encoder - ACOPOS No
Encoder monitoring Yes
Max. encoder cable length 100m
Depends on the cross section of the power supply wires of the encoder cable
Encoder power supply
Output voltage Typ. 12 V
Load capacity 350 mA
Protective measures
Overload-proof Yes
Short-circuit proof Yes
Synchronous serial interface
Signal transmission RS485
Baud rate 6.25 Mbit/s
Ambient conditions
Temperature
Operation
Nominal 5 to 40°C
Maximum 55°C
Storage -25 to 55°C
Transport -25 to 70°C
Relative humidity
Operation 5 to 85%
Storage 5 to 95%
Transport Max. 95% at 40°C
Material number:
8AC125.61-2
Description:
  • BiSS encoder interface (Mode C) for installation in ACOPOS servo drives
  • 6.25 Mbit/s, 12 V encoder supply
  • Encoder monitoring
ACOPOS plug-in module, BiSS encoder interface 12 V, baud rate 6.25 Mbit/s
Automation Studio HW Upgrades Version (Date) Download
V3.0 HW Upgrade (8AC125.61-2) EXE / 567 KB
V4.0 HW Upgrade (8AC125.61-2) EXE / 376 KB
Certificates Version (Date) Download
ACOPOS KC certificates ZIP / 601 KB
Declaration of conformity Servos PDF / 163 KB
E225616 UL Certificate of Compliance ACOPOS PDF / 242 KB
Documentation Version (Date) Download
ACOPOS User´s Manual PDF / 71 MB
Datasheet 8AC125.61-2 PDF / 470 KB

Please choose country and language

B&R Logo