Please choose country and language

General information
Certifications
CE Yes
UL cULus E115267
Industrial control equipment
ATEX Zone 2, II 3G Ex nA nC IIA T5 Gc
IP20, Ta (see X20 user's manual)
FTZÚ 09 ATEX 0083X
DNV GL Temperature: B (0 - 55°C)
Humidity: B (up to 100%)
Vibration: B (4 g)
EMC: B (Bridge and open deck)
Terminal block
Note Protected against vibration by the screw flange
Nominal values according to UL
Number of pins 3 (male)
Type of terminal block Screw clamp terminal block
Cable type Only copper wires (no aluminum wires!)
Spacing 5.08 mm
Connection cross section
AWG wire 26 to 14 AWG
Wire end sleeves with plastic covering 0.20 to 1.50 mm²
Solid wires 0.20 to 2.50 mm²
Fine-stranded wires 0.20 to 1.50 mm²
With wire end sleeves 0.20 to 1.50 mm²
Electrical characteristics
Nominal voltage 300 V
Nominal current 10 A / contact
Contact resistance ≤5 mΩ
Material number:
0TB103.3
Description:
Accessory terminal block, 3-pin male, screw clamp terminal block 1.5 mm², protected against vibration by the screw flange

Please choose country and language

B&R Logo