• Site web
  • Référence produit
  • Numéro de série
Identifié sous le nom Nom d'utilisateurDéconnexion
Chargement en cours...
B&R Logo
  • Spécifications

  • Informations de base

  • Accessoires

  • Téléchargements

  • Révisions

  • Numéro de série

    Communication module1x POWERLINK (V1/V2) managing or controlled node
    B&R ID code0xAAC0
    Ready relayNormally open and normally closed contact, max. 30 VDC, max. 10 A
    Status indicatorsStatus of POWERLINK node, network activity, link
    Bus functionYes, using status LED and software
    Station statusYes, using status LED and software
    Power consumption2 W
    Electrical isolation
    PC - IFxYes
    ULcULus E115267
    Industrial control equipment
    SRAM1 MB, battery-backed
    Fieldbus POWERLINK (V1/V2) managing or controlled node
    TypeType 4
    See the POWERLINK section of Automation Help under "General information, Hardware - IF/LS".
    Design2x shielded RJ45 (hub)
    Cable lengthMax. 100 m between 2 nodes (segment length)
    Transfer rate100 Mbit/s
    Physical layerANSI/IEEE 802.3
    Full-duplexPOWERLINK mode: No / Ethernet mode: Yes
    Auto-MDI / MDIXYes
    Hub propagation delay0.96 to 1 µs
    Degree of protection per EN 60529IP20 when installed
    Operation0 to 55°C
    Storage-25 to 70°C
    Transport-25 to 70°C
    Relative humidity
    Operation0 to 95%, non-condensing
    Storage0 to 95%, non-condensing
    Transport0 to 95%, non-condensing
    NoteOrder 1x TB704 terminal block separately
    Lithium battery included in content of delivery
    SlotStandard PCI half-size module, Plug & Play
    Installation in
    B&R Automation PCYes
    B&R Panel PCYes
    Desktop PCYes


  • POWERLINK (V1/V2) for real-time Ethernet communication
  • Integrated hub for efficient cabling
  • Configurable ring redundancy
  • Poll response chaining
Product description:
Material number:
Logic scanner, PCI half-size module, 1 POWERLINK (V1/V2) interface, managing or controlled node, integrated 2-port hub, ring redundancy function, PRC function, 1 MB SRAM (Automation Runtime), order 1x TB704 terminal block separately
Terminal blocks
  • 0TB704.9

    Accessory terminal block, 4-pin, screw clamp terminal block 2.5 mm²

  • 0TB704.91

    Accessory terminal block, 4-pin, push-in terminal block 2.5 mm²

  • 0AC201.91

    Lithium batteries 4 pcs., 3 V / 950 mAh button cell

  • 4A0006.00-000

    Lithium battery, 3 V / 950 mAh, button cell

étendre ou réduire
This site uses cookies to enable a better customer experience. By continuing to browse the site you are agreeing to our use of cookies. Please find more information about cookies in our Privacy Policy.