Please choose country and language:

Short description
Communication module 1x CAN bus, 1x POWERLINK (V1/V2) managing or controlled node
General information
B&R ID code 0x1DF5
Ready relay Normally open and normally closed contact, max. 30 VDC, max. 6 A
Status indicators Status of the POWERLINK station, network activity, link/collision for IF2
Diagnostics
Bus function (IF2) Yes, using LED status indicators and software
Data transfer (IF1) Yes, using software
Station status (IF2) Yes, using LED status indicators and software
Power consumption 4.0 W
Electrical isolation
IF1 - IF2 Yes
PC - IFx Yes
Certifications
CE Yes
UL cULus E115267
Industrial control equipment
GOST-R Yes
Controller
SRAM 1 MB, battery-backed
Interfaces
Interface IF1
Signal CAN bus
Design 4-pin male multipoint connector
Max. distance 1000 m
Transfer rate Max. 1 Mbit/s
Interface IF2
Fieldbus POWERLINK (V1/V2) managing or controlled node
Type Type 3
Design 1x shielded RJ45 port
Cable length Max. 100 m between two stations (segment length)
Transfer rate 100 Mbit/s
Transfer
Physical layer 100BASE-T
Half-duplex Yes
Full-duplex POWERLINK mode: No / Ethernet mode: Yes
Autonegotiation Yes
Auto-MDI / MDIX Yes
Operating conditions
Degree of protection per EN 60529 IP20 when installed
Environmental conditions
Temperature
Operation 0 to 55°C
Storage -25 to 70°C
Relative humidity
Operation 0 to 95%, non-condensing
Mechanical properties
Note Order 2x TB704 terminal blocks separately
Lithium battery included in delivery
Slot Standard PCI half-size module, Plug & Play
Installation in
B&R Automation PC Yes
B&R Panel PC Yes
Desktop PC Yes
Référence du matériel:
5LS187.6-1
Description:
  • Interface module with CAN bus and POWERLINK
Logic scanner, PCI half-size module, 1 POWERLINK (V1/V2) interface, managing or controlled node, 1 CAN bus interface, electrically isolated, max. 500 kbit/s, object buffer in transmit and receive direction, 1 MB SRAM (Automation Runtime), order 2x terminal block TB704 separately
Accessoires obligatoires
Terminal blocks
0TB704.9 Accessory terminal block, 4-pin, screw clamp terminal block 2.5 mm²
0TB704.91 Accessory terminal block, 4-pin, push-in terminal block 2.5 mm²
Accessoires optionnels
Batteries
0AC201.91 Lithium batteries 4 pcs., 3 V / 950 mAh button cell
4A0006.00-000 Lithium battery, 3 V / 950 mAh, button cell
Infrastructure components
0AC913.93 Bus adapter, CAN bus, 2 CAN bus interfaces, including 03 m attachment cable (TB704)
Automation Studio HW Upgrades Version (Date) Téléchargement
V2.7 HW Upgrade (5LS187.6-1) / 633 KB
V3.0 HW Upgrade (5LS187.6-1) / 632 KB
V4.0 HW Upgrade (5LS187.6-1) / 529 KB
Documentation Version (Date) Téléchargement
Datasheet 5LS187.6-1 / 16 MB

Please choose country and language:

B&R Logo