8WSA43.ee055ffgg-0

General information
Certifications
CE Yes
Motor
Nominal speed nN [rpm] 5500
Number of pole pairs 4
Nominal torque Mn [Nm] 0.3
Nominal current IN [A] 3.3
Stall torque M0 [Nm] 0.35
Stall current I0 [A] 3.8
Maximum torque Mmax [Nm] 0.96
Maximum current Imax [A] 11.4
Maximum speed nmax [rpm] 7000
Torque constant KT [Nm/A] 0.095
Voltage constant KE [V/1000 rpm] 6.07
Stator resistance R2ph [Ω] 0.72
Stator inductance L2ph [mH] 1.34
Electrical time constant tel [ms] 1.87
Thermal time constant ttherm [min] 11.3
Moment of inertia J [kgcm2] 0.025
Weight without brake m [kg] 0.54
Recommendations
ACOPOSmicro 80VD100Px.xxxx-01 C03X, C033
Référence produit:
8WSA43.ee055ffgg-0
Description:
Synchronous motor 8WSA43, SSI encoder, single-turn, nominal speed: 5500 rpm, smooth shaft, IP54, fixed attachment cable 0.5 m with hybrid connector
Accessoires obligatoires
Accessories
8BCM00X5.1B48E-0 8WS/ACOPOSmicro hybrid motor cable, length 0.5 m, ((2x(2x26AWG) + 2x24AWG)C + 3x16AWG)C, 12+3-pin female series 915 hybrid connector, can be used in cable drag chains
Accessoires optionnels
Accessories
8BCM0003.1B470-0 8WS hybrid motor cable extension, length 3 m, ((3x(2x26AWG)+(2x24AWG))C+3x26AWG+3x16AWG)C, 12+3-pin Itec hybrid motor connector, can be used in cable drag chains
8BCM0005.1B470-0 8WS hybrid motor cable extension, length 5 m, ((3x(2x26AWG)+(2x24AWG))C+3x26AWG+3x16AWG)C, 12+3-pin Itec hybrid motor connector, can be used in cable drag chains
8BCM0010.1B470-0 8WS hybrid motor cable extension, length 10 m, ((3x(2x26AWG)+(2x24AWG))C+3x26AWG+3x16AWG)C, 12+3-pin Itec hybrid motor connector, can be used in cable drag chains
8BCM0015.1B470-0 8WS hybrid motor cable extension, length 15 m, ((3x(2x26AWG)+(2x24AWG))C+3x26AWG+3x16AWG)C, 12+3-pin Itec hybrid motor connector, can be used in cable drag chains

Veuillez sélectionner un pays et une langue

B&R Logo