Please choose country and language:

General information
B&R ID code 0xB1CE
Configuration software Automation Studio (version 3.0.81 and higher) / SYCONnet
Certifications
CE Yes
UL cULus E115267
Industrial control equipment
HazLoc cULus HazLoc E180196
Industrial control equipment
for hazardous locations
Class I, Division 2, Groups ABCD
GOST-R Yes
Controller
Processor netX 100
Dual-port memory 64 kB
Fieldbus
Type PROFIBUS DP slave
Design 9-pin, male, DSUB connector
Transfer rate Max. 12 Mbit/s
Cyclic data Max. 488 bytes (IOCR)
DPV1 class 1, 2 Yes
Configuration data 244 bytes
Application-specific parameters 237 bytes
Electrical characteristics
Nominal voltage +3.3 V ±5%
Nominal current 650 mA
Environmental conditions
Temperature
Operation 0 to 55°C
Mechanical properties
Dimensions
Width 120 mm
Height 73.2 mm
Depth 18.5 mm
Slot Standard PCI half-size module, Plug & Play
Installation in
B&R Automation PC Yes
B&R Panel PC Yes
Desktop PC Yes
Référence du matériel:
5ACPCI.XDPS-00
Description:
PCI PROFIBUS DP slave

The 5ACPCI.XDPS-00 is equipped with a Profibus DP slave interface and can therefore be used as a slave in a Profibus DP network. Data is exchanged via the dual port memory.

Automation Studio HW Upgrades Version (Date) Téléchargement
V3.0 HW Upgrade (5ACPCI.XDPS-00) / 576 KB
V4.0 HW Upgrade (5ACPCI.XDPS-00) / 555 KB
Documentation Version (Date) Téléchargement
B&R Hilscher Fieldbus cards PDF / 3 MB
Datasheet 5ACPCI.XDPS-00 PDF / 679 KB
Fichiers de description de l'équipement Fieldbus Version (Date) Téléchargement
5ACPCI.XDPS-00 GSD package / 2 KB
Firmware Upgrades Version (Date) Téléchargement
Hilscher firmware (5ACPCI.XDPS-00) / 190 KB

Please choose country and language:

B&R Logo