• Site web
  • Référence produit
  • Numéro de série
Identifié sous le nom Nom d'utilisateurDéconnexion
Chargement en cours...
B&R Logo
  • Spécifications

  • Informations de base

  • Accessoires

  • Téléchargements

  • Révisions

  • Numéro de série

    B&R ID code0xB1D1
    Configuration softwareAutomation Studio (version 3.0.81 and higher) / SYCONnet
    ULcULus E115267
    Industrial control equipment
    HazLoccULus HazLoc E180196
    Industrial control equipment
    for hazardous locations
    Class I, Division 2, Groups ABCD
    Yes, although applies only if all components installed within the complete system have this certification and the complete system itself carries the corresponding mark.
    ProcessornetX 100
    Dual-port memory64 kB
    TypeCANopen master
    Design9-pin, male, DSUB connector
    Transfer rate10 kbit/s to 1 Mbit/s
    SlavesMax. 126
    Cyclic dataMax. 7168 bytes
    SDO upload and downloadMax. 200 bytes/request
    FunctionsNode-/ Life Guard., Heartbeat, PDO Mapping, NMT Management, SYNC
    PDO communicationsynchronized, remotely requested and event driven (change of state) max. 512 Rx/TxPDO
    Nominal voltage+3.3 V ±5%
    Nominal current650 mA
    Operation0 to 55°C
    Width120 mm
    Height73.2 mm
    Depth18.5 mm
    SlotStandard PCI half-size module, Plug & Play
    Installation in
    B&R Automation PCYes
    B&R Panel PCYes
    Desktop PCYes


Product description:
Material number:

The 5ACPCI.XCOM-00 is equipped with a CANopen master interface and can therefore be used as a master in a CANopen network. Data is exchanged via the dual port memory.

étendre ou réduire
This site uses cookies to enable a better customer experience. By continuing to browse the site you are agreeing to our use of cookies. Please find more information about cookies in our Privacy Policy.