Please choose country and language:

Short description
Bus controller POWERLINK (V1/V2) controlled node with compact link selector
General information
B&R ID code 0x2674
Status indicators Module status, bus function
Diagnostics
Module status Yes, using LED status indicator and software
Bus function Yes, using LED status indicator and software
Power consumption
Bus 2 W
Additional power dissipation caused by actuators (resistive) [W] -
Certifications
CE Yes
ATEX Zone 2, II 3G Ex nA nC IIA T5 Gc
IP20, Ta (see X20 user's manual)
FTZÚ 09 ATEX 0083X
UL cULus E115267
Industrial control equipment
HazLoc cCSAus 244665
Process control equipment
for hazardous locations
Class I, Division 2, Groups ABCD, T5
DNV GL Temperature: B (0 - 55°C)
Humidity: B (up to 100%)
Vibration: B (4 g)
EMC: B (bridge and open deck)
LR ENV1
KR Yes
EAC Yes
KC Yes
Interfaces
Fieldbus POWERLINK (V1/V2) controlled node
Type Type 2
Variant 2x shielded RJ45
Line length Max. 100 m between 2 stations (segment length)
Transfer rate 100 Mbit/s
Transfer
Physical layer 100BASE-TX
Half-duplex Yes
Full-duplex No
Autonegotiation Yes
Auto-MDI/MDIX Yes
Hub propagation delay 0.96 to 1 µs
Min. cycle time
Fieldbus 200 μs
X2X Link 200 μs
Synchronization between bus systems possible Yes
Electrical properties
Electrical isolation POWERLINK isolated from bus and I/O
Operating conditions
Mounting orientation
Horizontal Yes
Vertical Yes
Installation elevation above sea level
0 to 2000 m No limitation
>2000 m Reduction of ambient temperature by 0.5°C per 100 m
Degree of protection per EN 60529 IP20
Ambient conditions
Temperature
Operation
Horizontal mounting orientation -25 to 60°C
Vertical mounting orientation -25 to 50°C
Derating -
Storage -40 to 85°C
Transport -40 to 85°C
Relative humidity
Operation 5 to 95%, non-condensing
Storage 5 to 95%, non-condensing
Transport 5 to 95%, non-condensing
Mechanical properties
Note Order 1x terminal block X20TB12 separately.
Order 1x power supply module X20PS9400 or X20PS9402 separately.
Order 1x bus base X20BB80 or X20BB82 separately.
Spacing
X20BB80 37.5 +0.2 mm
X20BB82 87.5 +0.2 mm
Référence du matériel:
X20BC8084
Description:
  • POWERLINK
  • I/O configuration and firmware update via the fieldbus
  • Integrated compact link selector function
  • 2 active hub expansion modules can be connected to the bus controller
  • Redundant supply possible

The bus controller makes it possible to connect X2X Link I/O nodes to POWERLINK. It is also possible to operate the X2X Link cycle synchronously 1:1 or synchronous to POWERLINK using a prescaler.

POWERLINK is a standard protocol for Fast Ethernet with hard real-time characteristics. The POWERLINK Standardization Group (EPSG) ensures that the standard remains open and is continually developed. www.ethernet-powerlink.org

Systems with redundant cabling can be implemented easily using POWERLINK. Unlike ring redundancy, cable redundancy does not require cable looping, which can sometimes be problematic. This allows the creation of all types of tree structures. When using a device with the link selector function, data is always transferred via the highest quality network lines. The link selector function is integrated in the bus controller.

Informations complémentaires:

Technology information: Redundancy

User's manual: Redundanz für Steuerungssysteme

Accessoires obligatoires
System modules for bus controllers
X20BB80 X20 bus base, for X20 base module (BC, HB, etc.) and X20 power supply module, X20 end plates (left and right) X20AC0SL1/X20AC0SR1 included
X20PS9400 X20 power supply module, for bus controller and internal I/O power supply, X2X Link power supply
X20PS9402 X20 power supply module, for bus controller and internal I/O power supply, X2X Link power supply, supply not electrically isolated
System modules for expandable bus controllers
X20BB82 X20 bus base, for X20 base module (BC, HB, etc.) and X20 power supply module, with 2 expansion slots for 2 X20 add-on modules (IF, HB, etc.), X20 locking plates (left and right) X20AC0SL1/X20AC0SR1 included
Terminal blocks
X20TB12 Bornier X20, 12 points, 24 V codé
Accessoires optionnels
System modules for X20 redundancy systems
X20HB2885 X20 hub expansion module, integrated active 2-port hub, 2x RJ45
X20HB2886 X20 hub expansion module, integrated active 2-port hub, 2 fiber optic interfaces
Automation Studio HW Upgrades Version (Date) Téléchargement
V2.6 HW Upgrade (X20BC8084) EXE / 2 MB
V3.0 HW Upgrade (X20BC8084) EXE / 2 MB
V4.0 HW Upgrade (X20BC8084) EXE / 2 MB
Certificats Version (Date) Téléchargement
244665 CSA HazLoc Certificate of Compliance X20, X67 PDF / 56 KB
DNV GL Type Approval Certificate - X20 / Power Panel T30 PDF / 164 KB
E115267 UL CoC X20 PDF / 1 MB
FTZU 09 ATEX 0083X PDF / 697 KB
KR Type Approval Certificate MIL39390-AC003 (X20 System) PDF / 758 KB
Lloyds Register PDF / 579 KB
Documentation Version (Date) Téléchargement
Data sheet X20(c)BC8084 PDF / 286 KB
POWERLINK Bus Controller User's Manual PDF / 645 KB
Redundancy for control systems PDF / 8 MB
X20 System User´s Manual PDF / 50 MB
E-CAD (Modèles Electro ou EPLAN) Version (Date) Téléchargement
X20 EPLAN P8 from V2.4 EXE / 161 MB
M-CAD (Modèles Mécaniques) Version (Date) Téléchargement
3D File STEP/DXF X20BC and X20IF Module ZIP / 1 MB

Please choose country and language:

B&R Logo