DWL@DWL10000305611
| Version | Langue | Système d'exploitation | Date | Taille | Type | Téléchargement |
|---|---|---|---|---|---|---|
| 1.6.0.0 | * | 01/04/2019 | 3 Mo | EXE | AS2.6_HW_X20CS1030.exe | |
| Description |
V2.7 HW Upgrade (X20CS1030) Revision information X20CS1030 Version 1.6.0.0: ID: 636185 Support new HW-variant 3 Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 638360 Module documentation revised Datasheet V3.27 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\8144_1.fw(15), 1\8144_2.fw(101), 1\8144_3.fw(102) Version 1.5.0.0: ID: 613745 / Support ID: 400263150 Incorrect behavior with configuration setting "Forwarding" corrected Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\8144_1.fw(15), 1\8144_2.fw(101) Version 1.4.2.0: ID: 496165 Module documentation revised Data sheet V3.23 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\8144_1.fw(15), 1\8144_2.fw(15) Version 1.4.1.0: ID: 493110 Module documentation revised Data sheet V3.22 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\8144_1.fw(15), 1\8144_2.fw(15) Version 1.4.0.0: ID: 459505 Currently produced firmware files were added The new firmware was generated to extend the product family. It does not changethe model's behavior. Channel description changed: No Configurationdescription changed: No Firmware changed: Yes ID: 459515 Optimisation of HW description HWX file was optimised for demands of AS 4.x. Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 1\8144_1.fw(15), 1\8144_2.fw(15) Version 1.3.2.0: ID: 446805 / Support ID: 400163580 Documentation changed Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\8144_1.fw(12) Version 1.3.1.2: ID: 410670 Extension of EPLAN data Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\8144_1.fw(12) Version 1.3.1.1: ID: 212240 / Support ID: 400027560 Documentation updated Documentation updated Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\8144_1.fw(12) Version 1.3.1.0: ID: 362020 / Support ID: 400123608 Adaption for Feldbus Designer Pro Customer specific offset values can be provided in Feldbus Designer Pro. Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 1\8144_1.fw(12) Version 1.3.0.1: ID: 315065 / Support ID: 400101137 Rectify syntax failure (AS 2.7) Syntax of upgrade adapted to Automation Studio 2 Channel description changed: Yes Configuration description changed: No Firmware changed: No Firmware: 1\8144_1.fw(12) Version 1.3.0.0: ID: 290400 Support cyclic stream Additional function model "cyclic stream" implemented (AR J4.02) Channel description changed: Yes Configuration description changed: Yes Firmware changed: No Firmware: 1\8144_1.fw(12) Version 1.2.5.0: ID: 222735 Support of ACOPOSinverter (Modbus) from AR version B3.01 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\8144_1.fw(12) Version 1.2.4.0: ID: 221085 New configuration data point : BlockForwardDelay Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 1\8144_1.fw(12) Version 1.2.3.0: ID: 188125 Error in Message FIFO and BC mode corrected Error in Message FIFO and BC mode corrected, new FW V12 Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\8144_1.fw(12) Version 1.2.2.1: ID: 182940 Text corrections in HWC Text corrections in HWC Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\8144_1.fw(11) Version 1.2.2.0: ID: 175080 Enhancement mode SGC and correction of internal communication Enhancement mode SGC and correction of internal communication; new FW V11 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\8144_1.fw(11) Version 1.2.1.0: ID: 169820 Enhancement flat stream function model and Buscontroller mode Enhancement flat stream function model and Buscontroller mode Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\8144_1.fw(10) Version 1.1.0.0: ID: 165390 New Firmware V6 and HWC V1.1.0.0 Support Streamer and Powerlink BC Supervision channel Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\8144_1.fw(6) |
|||||
| Version | Langue | Système d'exploitation | Date | Taille | Type | Téléchargement |
| 1.5.0.0 | * | 26/11/2018 | 2 Mo | EXE | AS2.6_HW_X20CS1030.exe | |
| Description |
V2.7 HW Upgrade (X20CS1030) Revision information X20CS1030 Version 1.5.0.0: ID: 613745 / Support ID: 400263150 Incorrect behavior with configuration setting "Forwarding" corrected Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\8144_1.fw(15), 1\8144_2.fw(101) Version 1.4.2.0: ID: 496165 Module documentation revised Data sheet V3.23 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\8144_1.fw(15), 1\8144_2.fw(15) Version 1.4.1.0: ID: 493110 Module documentation revised Data sheet V3.22 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\8144_1.fw(15), 1\8144_2.fw(15) Version 1.4.0.0: ID: 459505 Currently produced firmware files were added The new firmware was generated to extend the product family. It does not change the model's behavior. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 459515 Optimisation of HW description HWX file was optimised for demands of AS 4.x. Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 1\8144_1.fw(15), 1\8144_2.fw(15) Version 1.3.2.0: ID: 446805 / Support ID: 400163580 Documentation changed Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\8144_1.fw(12) Version 1.3.1.2: ID: 410670 Extension of EPLAN data Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\8144_1.fw(12) Version 1.3.1.1: ID: 212240 / Support ID: 400027560 Documentation updated Documentation updated Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\8144_1.fw(12) Version 1.3.1.0: ID: 362020 / Support ID: 400123608 Adaption for Feldbus Designer Pro Customer specific offset values can be provided in Feldbus Designer Pro. Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 1\8144_1.fw(12) Version 1.3.0.1: ID: 315065 / Support ID: 400101137 Rectify syntax failure (AS 2.7) Syntax of upgrade adapted to Automation Studio 2 Channel description changed: Yes Configuration description changed: No Firmware changed: No Firmware: 1\8144_1.fw(12) Version 1.3.0.0: ID: 290400 Support cyclic stream Additional function model "cyclic stream" implemented (AR J4.02) Channel description changed: Yes Configuration description changed: Yes Firmware changed: No Firmware: 1\8144_1.fw(12) Version 1.2.5.0: ID: 222735 Support of ACOPOSinverter (Modbus) from AR version B3.01 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\8144_1.fw(12) Version 1.2.4.0: ID: 221085 New configuration data point : BlockForwardDelay Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 1\8144_1.fw(12) Version 1.2.3.0: ID: 188125 Error in MessageFIFO and BC mode corrected Error in Message FIFO and BC mode corrected, new FW V12 Channel description changed: No Configuration descriptionchanged: No Firmware changed: Yes Firmware: 1\8144_1.fw(12) Version 1.2.2.1: ID: 182940 Text corrections in HWC Text corrections in HWC Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\8144_1.fw(11) Version 1.2.2.0: ID: 175080 Enhancement mode SGC and correction of internal communication Enhancement mode SGC and correction of internal communication; new FW V11 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\8144_1.fw(11) Version 1.2.1.0: ID: 169820 Enhancement flatstream function model and Buscontroller mode Enhancement flat stream function model and Buscontroller mode Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\8144_1.fw(10) Version 1.1.0.0: ID: 165390 New Firmware V6 and HWC V1.1.0.0 Support Streamer and Powerlink BC Supervision channel Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\8144_1.fw(6) |
|||||
| Version | Langue | Système d'exploitation | Date | Taille | Type | Téléchargement |
| 1.4.2.0 | * | 15/09/2016 | 2 Mo | EXE | AS2.6_HW_X20CS1030.exe | |
| Description |
V2.7 HW Upgrade (X20CS1030) Revision information X20CS1030 Version 1.4.2.0: ID: 496165 Module documentation revised Data sheet V3.23 Channel description changed: No Configuration descriptionchanged: No Firmware changed: No Firmware: 1\8144_1.fw(15), 1\8144_2.fw(15) Version 1.4.1.0: ID: 493110 Module documentationrevised Data sheet V3.22 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\8144_1.fw(15), 1\8144_2.fw(15) Version 1.4.0.0: ID: 459505 Currently produced firmware files were added The new firmware was generated to extend the product family. It does not change the model's behavior. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 459515 Optimisation of HW description HWX file was optimised for demands of AS 4.x. Channel descriptionchanged: No Configuration description changed: Yes Firmware changed: No Firmware: 1\8144_1.fw(15), 1\8144_2.fw(15) Version 1.3.2.0: ID: 446805 / Support ID: 400163580 Documentation changed Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\8144_1.fw(12) Version 1.3.1.2: ID: 410670 Extension of EPLAN data Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\8144_1.fw(12) Version 1.3.1.1: ID: 212240 / Support ID: 400027560 Documentation updated Documentation updated Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\8144_1.fw(12) Version 1.3.1.0: ID: 362020 / Support ID: 400123608 Adaption for Feldbus Designer Pro Customer specific offset values can be provided in Feldbus Designer Pro. Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 1\8144_1.fw(12) Version 1.3.0.1: ID: 315065 / Support ID: 400101137 Rectify syntax failure (AS 2.7) Syntax of upgrade adapted to Automation Studio 2 Channeldescription changed: Yes Configuration description changed: No Firmware changed: No Firmware: 1\8144_1.fw(12) Version 1.3.0.0: ID: 290400 Support cyclic stream Additional function model "cyclic stream" implemented (AR J4.02) Channel description changed: Yes Configuration description changed: Yes Firmware changed: No Firmware: 1\8144_1.fw(12) Version 1.2.5.0: ID: 222735 Support of ACOPOSinverter (Modbus) from AR version B3.01 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\8144_1.fw(12) Version 1.2.4.0: ID: 221085 New configuration data point : BlockForwardDelay Channel description changed:No Configuration description changed: Yes Firmware changed: No Firmware: 1\8144_1.fw(12) Version 1.2.3.0: ID: 188125 Error in Message FIFO and BC mode corrected Error in Message FIFO and BC mode corrected, new FW V12 Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\8144_1.fw(12) Version 1.2.2.1: ID: 182940 Text corrections in HWC Text corrections in HWC Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\8144_1.fw(11) Version 1.2.2.0: ID: 175080 Enhancement mode SGC and correction of internal communication Enhancement mode SGC and correction of internal communication; new FW V11 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\8144_1.fw(11) Version 1.2.1.0: ID: 169820 Enhancement flat stream function model and Buscontroller mode Enhancement flat stream function model and Buscontroller mode Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\8144_1.fw(10) Version 1.1.0.0: ID: 165390 New Firmware V6 and HWC V1.1.0.0 Support Streamer and Powerlink BC Supervision channel Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\8144_1.fw(6) |
|||||
