General information
Cooling and mounting type Wall mounting
Certifications
CE Yes
UL cULus E225616
Power conversion equipment
KC Yes
Mains connection
Mains input voltage 3x 220 to 3x 480 VAC ±10%
Frequency 50 / 60 Hz ±4%
Allocation to power supply module 8BVP1650HC00.00x-1
8BVP1650HW00.00x-1
Continuous current 180 Aeff
Peak current <10 s 360 Aeff
Reduction of continuous current depending on ambient temperature
Vertical mounting orientation In preparation
Reduction of continuous current depending on installation elevation
Starting at 1000 m above sea level 14.4 Aeff per 1,000 m
Power dissipation at nominal current 750 W
Variant
U1, V1, W1 M10 threaded bolt
U2, V2, W2 M10 threaded bolt
Shield connection
On mains No
On device No
Terminal connection cross section
Flexible and fine-stranded wires
With wire end sleeves 6 to 120 mm²
Approbation data
UL/C-UL-US 10 AWG to 250 kcmil
CSA 10 AWG to 250 kcmil
Inductance 0.5 mH
Temperature sensor connection
Variant
T+, T- Terminals
Terminal connection cross section
Flexible and fine-stranded wires
With wire end sleeves 0.5 to 2.5 mm²
Approbation data
UL/C-UL-US 30 to 12 AWG
CSA 26 to 12 AWG
Operating conditions
Permissible mounting orientations
Hanging vertically No
Horizontal, face up No
Standing horizontally Yes
Installation elevation above sea level
Nominal 0 to 500 m
Maximum 4000 m
Pollution degree per EN 61800-5-1 2 (non-conductive pollution)
Overvoltage category per EN 61800-5-1 III
Degree of protection per EN 60529 IP10
Ambient conditions
Temperature
Operation
Nominal 5 to 40°C
Maximum 55°C
Storage -25 to 55°C
Transport -25 to 70°C
Relative humidity
Operation 5 to 85%
Storage 5 to 95%
Transport Max. 95% at 40°C
Mechanical properties
Dimensions
Width 475 mm
Height 360 mm
Depth 330 mm
Weight Approx. 79 kg
Número de material:
8BVR1650H000.100-1
Descripción:
  • Connection for temperature sensor
  • Optimally suited for ACOPOSmulti 8BVP power supply modules
ACOPOSmulti regeneration choke, 180 A, 480 V, connection via M10 threaded bolt

Seleccione país e idioma

B&R Logo