8BVE0500HC00.000-1

General information

Cooling and mounting type	Cold plate or pass-through mounting
Certifications
CE	Yes
UKCA	Yes
UL	cULus E225616 Power conversion equipment
EAC	Yes
KC	Yes

DC bus connection

Voltage
Nominal	750 VDC
Continuous power depending on fuse
10 A	6 kW
20 A	12 kW
50 A	30 kW
Continuous current depending on fuse
10 A	8 A_eff
20 A	16 A_eff
50 A	40 A_eff
Reduction of continuous power at ambient temperatures starting at 40°C	1.25% per °Kelvin
Reduction of continuous power depending on installation elevation
Starting at 500 m above sea level	10% per 1000 m
Reduction of continuous power depending on cooling method	No reduction
Peak current depending on fuse
10 A	20 A
20 A	40 A
50 A	100 A
Power dissipation with continuous power	200 W
Variant	ACOPOSmulti backplane

24 VDC power supply

Input voltage	25 VDC ±1.6%
Continuous power depending on fuse
12 A	240 W
20 A	400 W
30 A	600 W
Max. power consumption	5 W
Reduction of continuous power at ambient temperatures starting at 40°C	1.25% per °Kelvin
Variant	ACOPOSmulti backplane

DC bus cable outlet

Quantity	2
Fuse protection
Type	2x melting fuse ø 14 x 51 mm
Tripping characteristic	Ultra fast-acting
Rated current	10 / 20 / 50 A
Protective measures
Fuse-dependent overload protection
10 A	No (overload indicated via LED, dry alarm contacts present)
20 A	No (overload indicated via LED, dry alarm contacts present)
50 A	No (overload indicated via LED, dry alarm contacts present)
Short-circuit and ground fault protection	Yes
Max. line length between two expansion modules	5 m
Variant
DC+, DC-, PE	Connector
Shield connection	Yes
Terminal connection cross section
Flexible and fine-stranded wires
With wire end sleeves	0.5 to 16 mm²
Approbation data
UL/C-UL-US	20 to 6 AWG
CSA	20 to 6 AWG
Terminal cable cross section dimension of shield connection	12 to 22 mm

24 VDC auxiliary supply cable outlet

Quantity	2
Output voltage
DC bus voltage (U_DC): 260 to 315 VDC	25 VDC * (DC bus voltage / 315)
DC bus voltage (U_DC): 315 to 800 VDC	24 VDC ±6%
Fuse protection
Type	Melting fuse ø 10 x 38 mm
Tripping characteristic	Fast-acting
Rated current	12 / 30 A
Protective measures
Overload protection	Yes
Short-circuit proof	Yes
Max. line length between two expansion modules	5 m
Variant
24 VDC, COM	Connector
Shield connection	No
Terminal connection cross section
Flexible and fine-stranded wires
With wire end sleeves	0.25 to 6 mm²
Approbation data
UL/C-UL-US	22 to 10 AWG
CSA	22 to 10 AWG

Alarm contacts

Quantity	2
Type
Alarm contact 1	Normally closed contact
Alarm contact 2	Normally open contact
Electrical isolation
Alarm contact - ACOPOSmulti module	Yes
Alarm contact - Alarm contact	Yes
Nominal voltage	30 VDC
Maximum current	1 A
Switching delay	3 ms
Max. number of switching cycles	100,000
Protection
Overload-proof	No
Short-circuit proof	No

Operating conditions

Permissible mounting orientations
Hanging vertically	Yes
Horizontal, face up	Yes
Standing horizontally	No
Installation elevation above sea level
Nominal	0 to 500 m
Maximum	4000 m
Pollution degree per EN 61800-5-1	2 (non-conductive pollution)
Overvoltage category per EN 61800-5-1	III
Degree of protection per EN 60529	IP20

Ambient conditions

Temperature
Operation
Nominal	5 to 40°C
Maximum	55°C
Storage	-25 to 55°C
Transport	-25 to 70°C
Relative humidity
Operation	5 to 85%
Storage	5 to 95%
Transport	Max. 95% at 40°C

Mechanical properties

Dimensions
Width	53 mm
Height	317 mm
Depth
Cold plate	212 mm
Pass-through mounting	209 mm
Weight	Approx. 2.6 kg
Module width	1

Número de material:

8BVE0500HC00.000-1

Descripción:

For distributing the DC bus power supply and 24 VDC auxiliary supply to multiple mounting plates
For setting up decentralized units in the ACOPOSmulti drive system
Output for overload protection

ACOPOSmulti expansion module 50 A, AS, cold plate or pass-through mounting

Accesorios obligatorios

Fuse sets

8BXS000.0000-00	ACOPOSmulti fuse set: 2x fuse 14 x 51 mm, 50 A, high-speed
8BXS001.0000-00	ACOPOSmulti fuse set: 2x fuse 14 x 51 mm, 20 A, high-speed
8BXS002.0000-00	ACOPOSmulti fuse set: 2x fuse 14 x 51 mm, 10 A, high-speed
8BXS003.0000-00	ACOPOSmulti fuse set: 1x fuse 10 x 38 mm, 30 A, fast-acting
8BXS004.0000-00	ACOPOSmulti fuse set: 1x fuse 10 x 38 mm, 12 A, fast-acting
8BXS005.0000-00	ACOPOSmulti fuse set: 2x fuse 14 x 51 mm, 25 A, high-speed

Terminal block sets

8BZVE050000.000-1A	Screw clamp terminal block set for ACOPOSmulti 8BVE0500Hx00.000-1 modules: 2x 8TB3102.201C-11, 2x 8TB4103.203C-10, 1x 8TB2104.2010-00

Accesorios opcionales

8BVE / 8CVI connection cables

8CCH0002.11120-1	Hybrid cable for connecting 8BVE to 8CVI or 8DI, length 2 m, 2x 2x 0.34 mm² + 4x 0.75 mm² + 5x 2.5 mm², 1x 15-pin female TYCO connector, 1x RJ45 connector, integrated shield fixing, can be used in cable drag chains
8CCH0005.11120-1	Hybrid cable for connecting 8BVE to 8CVI or 8DI, length 5 m, 2x 2x 0.34 mm² + 4x 0.75 mm² + 5x 2.5 mm², 1x 15-pin female TYCO connector, 1x RJ45 connector, integrated shield fixing, can be used in cable drag chains
8CCH0007.11120-1	Hybrid cable for connecting 8BVE to 8CVI or 8DI, length 7 m, 2x 2x 0.34 mm² + 4x 0.75 mm² + 5x 2.5 mm², 1x 15-pin female TYCO connector, 1x RJ45 connector, integrated shield fixing, can be used in cable drag chains
8CCH0009.11120-1	Hybrid cable for connecting 8BVE to 8CVI or 8DI, length 9 m, 2x 2x 0.34 mm² + 4x 0.75 mm² + 5x 2.5 mm², 1x 15-pin female TYCO connector, 1x RJ45 connector, integrated shield fixing, can be used in cable drag chains
8CCH0010.11120-1	Hybrid cable for connecting 8BVE to 8CVI or 8DI, length 10 m, 2x 2x 0.34 mm² + 4x 0.75 mm² + 5x 2.5 mm², 1x 15-pin female TYCO connector, 1x RJ45 connector, integrated shield fixing, can be used in cable drag chains

Expansion cables

8BCA0003.1111A-0	ACOPOSmulti expansion cable, length 3 m, 3x 1.5 mm², integrated shield plate, can be used in cable drag chains
8BCA0003.1312A-0	ACOPOSmulti expansion cable, length 3 m, 3x 4 mm², integrated shield plate, can be used in cable drag chains
8BCA0003.1513A-0	ACOPOSmulti expansion cable, length 3 m, 3x 10 mm², integrated shield plate, can be used in cable drag chains
8BCA0005.1111A-0	ACOPOSmulti expansion cable, length 5 m, 3x 1.5 mm², integrated shield plate, can be used in cable drag chains
8BCA0005.1312A-0	ACOPOSmulti expansion cable, length 5 m, 3x 4 mm², integrated shield plate, can be used in cable drag chains
8BCA0005.1513A-0	ACOPOSmulti expansion cable, length 5 m, 3x 10 mm², integrated shield plate, can be used in cable drag chains
8BCA01X5.1111A-0	ACOPOSmulti expansion cable, length 1.5 m, 3x 1.5 mm², integrated shield plate, can be used in cable drag chains
8BCA01X5.1312A-0	ACOPOSmulti expansion cable, length 1.5 m, 3x 4 mm², integrated shield plate, can be used in cable drag chains
8BCA01X5.1513A-0	ACOPOSmulti expansion cable, length 1.5 m, 3x 10 mm², integrated shield plate, can be used in cable drag chains

Fan modules

8BXF001.0000-00	ACOPOSmulti fan module, replacement fan for ACOPOSmulti modules (8BxP/8B0C/8BVI/8BVE/8B0K)

Shield component sets

8SCS000.0000-00	ACOPOSmulti shield component set: 1x shield plate 1x type 0, 1x hose clamp, B 9 mm, D 12-22 mm
8SCS009.0000-00	ACOPOSmulti shield component set: 1x ACOPOSmulti holding plate SK8-14, 1x shield connection clamp SK14

Terminal blocks

8TB2104.2010-00	4-pin screw clamp terminal block, 1-row, pitch: 5.08 mm, label 1: Numbered consecutively
8TB3102.201C-11	2-pin screw clamp terminal block, 1-row, pitch: 7.62 mm, label 1: Numbered consecutively, coding C: 10
8TB4103.203C-10	3-pin screw clamp terminal block, 1-row, pitch: 10.16 mm, label 3: +DC -DC PE, coding C: 010

Certificados	Versión (fecha)	Descargar
ACOPOSmulti KC certificates		ZIP / 3 MB Para descargar se debe iniciar sesión
E225616 UL Certificate of Compliance ACOPOSmulti (UL 508C)		PDF / 282 KB Para descargar se debe iniciar sesión
E225616 UL Certificate of Compliance ACOPOSmulti (UL 61800-5-1)		PDF / 183 KB Para descargar se debe iniciar sesión
EAC Conformity declaration 8B power sources		PDF / 1 MB Para descargar se debe iniciar sesión
EU Declaration Servos ACOPOSmulti		PDF / 219 KB Para descargar se debe iniciar sesión
UK Declaration Servos ACOPOSmulti		PDF / 109 KB Para descargar se debe iniciar sesión

Documentación	Versión (fecha)	Descargar
ACOPOSmulti User´s Manual		PDF / 302 MB Para descargar se debe iniciar sesión
Datasheet 8BVE0500HC00.000-1		PDF / 1 MB Para descargar se debe iniciar sesión

E-CAD (plantillas Electro o EPLAN)	Versión (fecha)	Descargar
ACOPOSmulti EPLAN P8 from V2.4		EXE / 81 MB Para descargar se debe iniciar sesión

M-CAD (plantillas mecánicas)	Versión (fecha)	Descargar
3D file STEP 8BVE0500HC00.000-1		ZIP / 100 KB Para descargar se debe iniciar sesión