General information
Module type ACOPOS plug-in module
B&R ID code 0x1067
Slot Slots 2, 3 and 4
Power consumption Max. 7.5 W
Depends on the current consumption of the connected encoder
Certifications
CE Yes
UKCA Yes
UL cULus E225616
Power conversion equipment
KC Yes
Encoder inputs
Quantity 1
Signal transmission Differential signal transfer
Module-side connection 15-pin female DSUB
Status indicators UP/DN LEDs
Electrical isolation
Encoder - ACOPOS Yes
Encoder monitoring Yes
Max. encoder cable length 50 m
Encoder power supply
Supply voltages Internal, optionally 5 V / 15 V
Load capacity
5 VDC 350 mA
15 VDC 350 mA
Short-circuit proof, overload protection Yes
Sense lines
For 5 VDC Yes, 2, compensation of max. 2 V
For 15 VDC No
Incremental encoders
Counter size 32-bit
Input frequency Max. 200 kHz
Evaluation 4x
Signal form Square wave pulse
Counter frequency Max. 800 kHz
Reference frequency Max. 200 kHz
Distance between edges Min. 0.6 µs
Inputs A, A\, B, B\, R, R\
Differential voltage inputs A, B, R
Minimum 2.5 V
Maximum 6 V
SSI absolute encoder
Coding Gray, binary
Baud rate 200 kbit/s
Word size Max. 31-bit
Differential voltage clock output - 120 Ω
Minimum 2.5 V
Maximum 5 V
Differential voltage data input
Minimum 2.5 V
Maximum 6 V
Ambient conditions
Temperature
Operation
Nominal 5 to 40°C
Maximum 55°C
Storage -25 to 55°C
Transport -25 to 70°C
Relative humidity
Operation 5 to 85%
Storage 5 to 95%
Transport Max. 95% at 40°C
Número de material:
8AC123.60-1
Descripción:
  • Incremental encoder and SSI absolute encoder interface for installation in ACOPOS servo drives
  • Monitors encoder input signals
  • Encoder supply voltage of 5V or 15V
  • Compensates for a voltage drop at 5 V encoder voltage supply
ACOPOS plug-in module, incremental encoder and SSI absolute encoder interface
Actualizaciones de hardware de Automation Studio Versión (fecha) Descargar
V4.0 HW Upgrade (8AC123.60-1) EXE / 196 KB
Certificados Versión (fecha) Descargar
ACOPOS KC certificates ZIP / 601 KB
E225616 UL Certificate of Compliance ACOPOS PDF / 242 KB
Documentación Versión (fecha) Descargar
ACOPOS User´s Manual PDF / 49 MB
Datasheet 8AC123.60-1 PDF / 821 KB
E-CAD (plantillas Electro o EPLAN) Versión (fecha) Descargar
ACOPOS EPLAN P8 from V2.4 EXE / 23 MB
M-CAD (plantillas mecánicas) Versión (fecha) Descargar
3D file STEP 8AC123.60-1 ZIP / 118 KB

Seleccione país e idioma

B&R Logo