Motor
| Nominal speed nN [rpm] | 4500 |
| Number of pole pairs | 5 |
| Nominal torque Mn [Nm] | 1.27 |
| Nominal power PN [W] | 598 |
| Nominal current IN [A] | 1.31 |
| Stall torque M0 [Nm] | 1.4 |
| Stall current I0 [A] | 1.42 |
| Maximum torque Mmax [Nm] | 4.5 |
| Maximum current Imax [A] | 6 |
| Maximum speed nmax [rpm] | 7000 |
| Torque constant KT [Nm/A] | 0.97 |
| Voltage constant KE [V/1000 rpm] | 58.64 |
| Stator resistance R2ph [Ω] | 13.9 |
| Stator inductance L2ph [mH] | 27 |
| Electrical time constant tel [ms] | 1.94 |
| Thermal time constant ttherm [min] | 31 |
| Moment of inertia J [kgcm2] | 0.38 |
| Weight without brake m [kg] | 2.2 |
Holding brake
| Holding torque of brake MBr [Nm] | 3.2 |
| Mass of brake [kg] | 0.6 |
| Moment of inertia of brake JBr [kgcm2] | 0.38 |
Recommendations
| ACOPOS 8Vxxxx.xx... | 1016 |
| ACOPOSmulti 8BVIxxxx... | 0014 |
| ACOPOS P3 8EIxxxx... | 2X2X |
| Cross section for B&R motor cables [mm2] | 0.75 |
| Connector size | 1 |
Options
| Connection type | Single-cable solution |
| Connection direction | Swivel, SCS |
| Encoder | D9 2.2 inductive multi-turn |
| Shaft end | Smooth shaft |
Material number:
8LSAA2.D9045S200-3Description:
Synchronous motor, number of pole pairs: 5 pairs, nominal speed: 4500 rpm stall torque: 1.400 Nm, motor with holding brake, smooth shaft single-cable solution (swivel), single-cable solution, centering diameter 60 mm j6 fit (self-cooling, construction type A), without oil seal, 560 VDC brake holding torque: 3.20 Nm, D9 2.2 ind. multi-turn.
| DT Upgrade | Version (Date) | Download |
|---|---|---|
| V4.0 DT Upgrade (8LSAA2.D9045S200-3) | EXE / 299 KB |
