General information
| Certifications | |
| CE | Yes |
Motor
| Nominal speed nN [rpm] | 3000 |
| Number of pole pairs | 3 |
| Nominal torque Mn [Nm] | 30 |
| Nominal power PN [W] | 9425 |
| Nominal current IN [A] | 18.4 |
| Stall torque M0 [Nm] | 40 |
| Stall current I0 [A] | 24.5 |
| Maximum torque Mmax [Nm] | 187 |
| Maximum current Imax [A] | 156 |
| Maximum speed nmax [rpm] | 4500 |
| Torque constant KT [Nm/A] | 1.63 |
| Voltage constant KE [V/1000 rpm] | 98.4 |
| Stator resistance R2ph [Ω] | 0.21 |
| Stator inductance L2ph [mH] | 3.07 |
| Electrical time constant tel [ms] | 14.62 |
| Thermal time constant ttherm [min] | 65 |
| Moment of inertia J [kgcm2] | 154.7 |
| Weight without brake m [kg] | 36.5 |
Holding brake
| Holding torque of brake MBr [Nm] | 28 |
| Mass of brake [kg] | 1.6 |
| Moment of inertia of brake JBr [kgcm2] | 5.85 |
Recommendations
| ACOPOS 8Vxxxx.xx... | 1320 |
| ACOPOSmulti 8BVIxxxx... | 0330 |
| Cross section for B&R motor cables [mm2] | 4 |
Options
| Connection type | Connector |
| Connection direction | Angled (swivel) |
| Encoder | EB inductive 32-line multi-turn V2 |
| Shaft end | Smooth shaft |
Material number:
8LSA75.EB030DC04-0Description:
Synchronous motor, 3 pole pairs, nN = 3000 Mo=40.000 Nm, with special brake for reinforced bearing, smooth shaft, swivel connector, centering diameter 180 mm, j6 fit, self-cooling, construction type A, IP64, without oil seal, 560 V (DC bus), brake holding torque: 28.00 Nm, EB ind. 32-line multi-turn V2 with Reinforced A-side bearing
| Certificates | Version (Date) | Download |
|---|---|---|
| Declaration Motors Dreh-Sync | PDF / 302 KB | |
| E360421 UL Certificate of Compliance 8LS/8LT/8LV | PDF / 410 KB |
| DT Upgrade | Version (Date) | Download |
|---|---|---|
| V4.0 DT Upgrade (8LSA75.EB030DC04-0) | EXE / 322 KB |
| Documentation | Version (Date) | Download |
|---|---|---|
| 8LSA/C...-0 Users manual (Motor version: 0) | PDF / 5 MB | |
| 8LSA/C/O/P...-3 Users manual (Motor version: 3) | PDF / 24 MB |
