General information
| Certifications | |
| CE | Yes |
Motor
| Nominal speed nN [rpm] | 4500 |
| Number of pole pairs | 2 |
| Nominal torque Mn [Nm] | 0.72 |
| Nominal power PN [W] | 339 |
| Nominal current IN [A] | 0.74 |
| Stall torque M0 [Nm] | 0.8 |
| Stall current I0 [A] | 0.82 |
| Maximum torque Mmax [Nm] | 3.2 |
| Maximum current Imax [A] | 3.75 |
| Maximum speed nmax [rpm] | 12000 |
| Torque constant KT [Nm/A] | 0.97 |
| Voltage constant KE [V/1000 rpm] | 58.64 |
| Stator resistance R2ph [Ω] | 33.5 |
| Stator inductance L2ph [mH] | 66.9 |
| Electrical time constant tel [ms] | 1.81 |
| Thermal time constant ttherm [min] | 30 |
| Moment of inertia J [kgcm2] | 0.2 |
| Weight without brake m [kg] | 1.92 |
Holding brake
| Holding torque of brake MBr [Nm] | 2.2 |
| Mass of brake [kg] | 0.16 |
| Moment of inertia of brake JBr [kgcm2] | 0.12 |
Recommendations
| ACOPOS 8Vxxxx.xx... | 1022 |
| ACOPOSmulti 8BVIxxxx... | 0014 |
| Cross section for B&R motor cables [mm2] | 1.5 |
Options
| Connection type | Connector |
| Connection direction | Angled (swivel) |
| Encoder | E9 inductive 16-line multi-turn |
| Shaft end | Smooth shaft |
Material number:
8LSA26.E9045D000-0Description:
synchronous motor, number of pole pairs: 2 pairs, nominal speed: 4500 rpm stall torque: 0.800 Nm, no brake, smooth shaft, angled connector (swivel), centering diameter 40 mm, j6 fit (self-cooling, construction type A), IP64 protection, without oil seal 560 VDC, brake holding torque: 2.20 Nm, E9 ind. 16-line multi-turn
| Certificates | Version (Date) | Download |
|---|---|---|
| E360421 UL Certificate of Compliance 8LS/8LT/8LV | PDF / 410 KB |
| DT Upgrade | Version (Date) | Download |
|---|---|---|
| V4.0 DT Upgrade (8LSA26.E9045D000-0) | EXE / 322 KB |
| Documentation | Version (Date) | Download |
|---|---|---|
| 8LSA/C...-0 Users manual (Motor version: 0) | PDF / 5 MB | |
| 8LSA/C/O/P...-3 Users manual (Motor version: 3) | PDF / 24 MB |
