B&R Logo
  • Sitio web
  • Referencia
  • Número de serie
Iniciar sesión
Conectado comoNombre de usuarioCerrar sesión
Cargando...
Español España

Please choose your country:

Siganos en:
  • Especificaciones

  • Información básica

  • Accesorios

  • Descargas

  • Revisiones

  • Número de serie

    Status displayGreen LED (DC OK), threshold value Uout = 21.5 V
    Isolation voltage
    Input - Output4 kV AC (type test)
    2 kV AC (routine test)
    Input - PE2 kV AC (type test)
    2 kV AC (routine test)
    Output - PE500 VDC (type test)
    Connection typeScrew clamp connection
    Connection cross section
    Wire end sleevesFlexible cables require wire end sleeves in order to fulfill EN 60950 / UL 60950
    Flexible0.2 to 2.5 mm² / 24 to 14 AWG
    Inflexible0.2 to 2.5 mm² / 24 to 14 AWG
    Wire stripping length9 mm (input/output)
    Nominal input voltage100 to 240 VAC
    Input voltageAC 85 to 264 V (wide range), 45 to 65 Hz
    300 VAC (temporary)
    Input currentApprox. 3 A (100 VAC)
    Approx. 1.5 A (240 VAC)
    Inrush current limitation<15 A
    I2t0.7 A2s
    Power failure bypass>24 ms (120 VAC)
    >24 ms (230 VAC)
    Turn-on time<1 s (typical)
    Power factor (cos φ)0.99
    Discharge current to PE<3.5 mA
    Protective circuitTransient surge protection (varistor)
    Internal fuse6.3 A, slow-blow
    Required line fuse for line protection10 A
    16 A (characteristic B)
    Input voltage <90 VACDerating of the output current: 2.5% per °C
    Nominal voltage24 VDC ±1%
    Output power240 W
    Setting range for output voltage22.5 to 29.5 VDC
    Output current
    -25 to 55°C10.0 A
    >55°CDerating: 2.5% per °C
    Current limitationApprox. 14 A (short circuit)
    Control deviation<1% (static load change 10 to 90%)
    <2% (dynamic load change 10 to 90%)
    <0.1% (input voltage change ±10%)
    Rise time<2 ms (UOUT (10 to 90%))
    Residual ripple<10 mVSS
    Switching spikes<50 mVSS
    Can be connected in parallelYes, to establish redundancy and increase capacity
    Can be connected in seriesYes
    Max. capacitive loadUnlimited
    Protection against internal overvoltagesYes, limited to <35 VDC
    Protection functionsOutput protected against continuous short circuit, open circuit and overload
    Power back immunityMax. 35 VDC
    Output noise suppressionUnit complies with EN 55011 (Class B)
    Effectiveness>89%
    MTBF>500,000 h, in accordance with IEC 61709 (SN 29500)
    Power loss
    Rated loadMax. 30 W
    No-load operationMax. 6.7 W
    Mounting orientation
    HorizontalYes
    VerticalNo
    Ventilation / CoolingNormal convection, no fan required
    EN 60529 protectionIP20
    Rated protectionI, with PE connection
    Temperature
    Operation-25 to 70°C (>55°C derating)
    Storage-40 to 85°C
    Transport-40 to 85°C
    Relative humidity
    OperationMax. 95%, non-condensing
    Vibration
    Operation<15 Hz, amplitude ±2.5 mm, in accordance with IEC 60068-2-6
    15 to 150 Hz, 2.3 g, 90 min
    Shock
    Operation30 g in each direction, in accordance with IEC 60068-2-27
    Degree of pollution2, in accordance with EN 50178
    Climate category3K3, in accordance with EN 60721
    Housing
    MaterialSheet metal, galvanized
    Side panels: Aluminum
    InstallationEasy rail mounting (DIN rail NS 35, EN 60715)
    Dimensions
    Width60 mm
    Height130 mm
    Depth152.5 mm
    Weight1400 g

0PS1100.1

  • 100 to 240 VAC wide-range input
  • High dielectric strength
  • Can be connected in parallel for increased capacity and redundancy
  • Reliable operation due to long power failure bypass function under full load and high MTBF (>500,000 h)
  • International certification package
  • Wide temperature range from -25 to 70°C
  • Closed metal housing
-
Product description:
Material number:
0PS1100.1
Description:
24 VDC power supply, 1 phase, 10 A, input 100 to 240 VAC, wide range, top-hat rail installation
Abrir/cerrar todo
Share
This site uses cookies to enable a better customer experience. By continuing to browse the site you are agreeing to our use of cookies. Please find more information about cookies in our Data privacy statement.