Productos
Especificaciones
Información básica
Accesorios
Descargas
Revisiones
Número de serie
Status displayGreen LED (DC OK), threshold value Uout = 21.5 V
Isolation voltage
Input - Output4 kV AC (type test)
2 kV AC (routine test)
2 kV AC (routine test)
Input - PE3.5 kV AC (type test)
2 kV AC (routine test)
2 kV AC (routine test)
Output - PE500 VDC (type test)
Connection typeScrew clamp connection
Connection cross section
Wire end sleevesFlexible cables require wire end sleeves in order to fulfill EN 60950 / UL 60950
Flexible0.2 to 2.5 mm² / 24 to 12 AWG
Inflexible0.2 to 2.5 mm² / 24 to 12 AWG
Wire stripping length6.5 mm (input/output)
Certification
CEYes
UL (cULus)cULus E123528
Industrial control equipment
Industrial control equipment
Nominal input voltage100 to 240 VAC
Input voltageAC 85 to 264 V (wide range), 45 to 65 Hz
DC 95 to 250 V
DC 95 to 250 V
Input currentApprox. 0.8 A (120 VAC)
Approx. 0.4 A (230 VAC)
Approx. 0.4 A (230 VAC)
Inrush current limitation<15 A (typical)
I2t<0.6 A2s
Power failure bypass>20 ms (120 VAC)
>100 ms (230 VAC)
>100 ms (230 VAC)
Switch-on time<0.5 s
Power factor (cos φ)0.65
Protective circuitTransient surge protection (varistor)
Internal fuse3.15 A, slow-blow
Required line fuse for line protection6 A (characteristic B)
10 A (characteristic B)
16 A (characteristic B)
10 A (characteristic B)
16 A (characteristic B)
Nominal voltage24 VDC ±1%
Output power60 W
Setting range for output voltage22.5 to 29.5 VDC (>24 VDC power constant)
Output current
-25 to 40°C2.75 A
40 to 55°C2.5 A
>55°CDerating: 2.5% per °C
Current limitationMax. 4.4 A
Control deviation<1% (static load change 10 to 90%)
<2% (dynamic load change 10 to 90%)
<0.1% (input voltage change ±10%)
<2% (dynamic load change 10 to 90%)
<0.1% (input voltage change ±10%)
Rise time<0.5 s (UOUT (10 to 90%))
Residual ripple<50 mVSS (at rated values)
Switching peaks<50 mVSS (at rated values)
Can be connected in parallelYes, to establish redundancy and increase capacity
Can be connected in seriesYes
Protection against internal overvoltagesYes, limited to approximately 35 VDC
Protection functionsOutput protected against continuous short circuit, open circuit and overload
Power back immunityMax. 35 VDC
Output noise suppressionUnit complies with EN 55011 (Class B)
Efficiency>86% (at 230 VAC and rated values)
MTBF>500,000 h, in accordance with IEC 61709 (SN 29500)
Power dissipation
Rated loadMax. 9.9 W
No-load operationMax. 0.7 W
Ventilation/CoolingNormal convection, no fan required
Protection per EN 60529IP20
Rated protectionII
Temperature
Operation-25 to 70°C (>55°C derating)
Storage-40 to 85°C
Transport-40 to 85°C
Relative humidity
OperationMax. 95%, non-condensing
Vibration
Operation<15 Hz, amplitude ±2.5 mm, in accordance with IEC 60068-2-6
15 to 150 Hz, 2.3 g, 90 min
15 to 150 Hz, 2.3 g, 90 min
Shock
Operation30 g in each direction, in accordance with IEC 60068-2-27
Pollution degree2, in accordance with EN 50178
Climate category3K3, in accordance with EN 60721
Housing
MaterialPolycarbonate
Mounting foot: POM plastic
Mounting foot: POM plastic
InstallationEasy rail mounting (DIN rail NS 35, EN 60715) or wall mounting
Dimensions
Width72 mm
Height90 mm
Depth61 mm
Weight300 g
0PS1025.2
- 100 to 240 VAC wide-range input
- Can be connected in parallel for increased capacity and redundancy
- Reliable operation due to long power failure bypass function under full load and high MTBF (>500,000 h)
- International certification package
- Wide temperature range from -25 to 70°C
- Extra flat design
- Easy DIN rail or wall mounting

Product description:
Material number:
0PS1025.2
Description:
24 VDC power supply, 1 phase, 2.5 A, input 100 to 240 VAC, wide range, top-hat rail installation
Abrir/cerrar todo