Por favor elija país e idioma:

Short description
Communication module 1x POWERLINK (V1/V2) managing or controlled node
General information
B&R ID code 0x2152
Ready relay Normally open and normally closed contact, max. 30 VDC, max. 6 A
Status indicators Status of POWERLINK node, network activity, link
Diagnostics
Bus function Yes, using status LED and software
Station status Yes, using status LED and software
Power consumption 2 W
Electrical isolation
PC - IF1 Yes
Certifications
CE Yes
UL cULus E115267
Industrial control equipment
Controller
SRAM 1 MB, battery-backed
Interfaces
Fieldbus POWERLINK (V1/V2) managing or controlled node
Type Type 3
Design 2x shielded RJ45 (hub)
Cable length Max. 100 m between 2 nodes (segment length)
Transfer rate 100 Mbit/s
Transfer
Physical layer 100BASE-TX
Half-duplex Yes
Full-duplex POWERLINK mode: No / Ethernet mode: Yes
Autonegotiation Yes
Auto-MDI / MDIX Yes
Hub propagation delay 0.96 to 1 µs
Operating conditions
Degree of protection per EN 60529 IP20 when installed
Environmental conditions
Temperature
Operation 0 to 55°C
Storage -25 to 70°C
Transport -25 to 70°C
Relative humidity
Operation 0 to 95%, non-condensing
Storage 0 to 95%, non-condensing
Transport 0 to 95%, non-condensing
Mechanical properties
Note Order 1x TB704 terminal block separately
Lithium battery is included in the delivery
Slot Standard PCI half-size module, Plug & Play
Installation in
B&R Automation PC Yes
B&R Panel PC Yes
Desktop PC Yes
Material number:
5LS182.6-1
Description:
  • POWERLINK for real-time Ethernet communication
  • Integrated hub for efficient cabling
  • Configurable ring redundancy
Logic scanner, PCI half-size module, 1 POWERLINK (V1/V2) interface, managing or controlled node, integrated 2-port hub, ring redundancy function, 1 MB SRAM (Automation Runtime), order 1x TB704 terminal block separately
Mandatory Accessories
Terminal blocks
0TB704.9 Accessory terminal block, 4-pin, screw clamp terminal block 2.5 mm²
0TB704.91 Accessory terminal block, 4-pin, push-in terminal block 2.5 mm²
Optional Accessories
Batteries
0AC201.91 Lithium batteries 4 pcs., 3 V / 950 mAh button cell
4A0006.00-000 Lithium battery, 3 V / 950 mAh, button cell
Automation Studio HW Upgrades Version (Date) Download
V2.7 HW Upgrade (5LS182.6-1) / 615 KB
V3.0 HW Upgrade (5LS182.6-1) / 615 KB
V4.0 HW Upgrade (5LS182.6-1) / 504 KB
Documentation Version (Date) Download
Datasheet 5LS182.6-1 PDF / 19 MB

Por favor elija país e idioma:

B&R Logo