• Sitio web
  • Referencia
  • Número de serie
Iniciar sesión
Conectado comoNombre de usuarioCerrar sesión
B&R Logo
  • Especificaciones

  • Información básica

  • Accesorios

  • Descargas

  • Revisiones

  • Número de serie

    Communication module1x CAN bus, 1x POWERLINK (V1/V2) managing or controlled node
    B&R ID code0x1DF5
    Ready relayNormally open and normally closed contact, max. 30 VDC, max. 6 A
    Status indicatorsStatus of the POWERLINK station, network activity, link/collision for IF2
    Bus function (IF2)Yes, using LED status indicators and software
    Data transfer (IF1)Yes, using software
    Station status (IF2)Yes, using LED status indicators and software
    Power consumption4.0 W
    Electrical isolation
    IF1 - IF2Yes
    PC - IFxYes
    ULcULus E115267
    Industrial control equipment
    SRAM1 MB, battery-backed
    IF1 interface
    SignalCAN bus
    This CAN bus interface can be configured as a CANopen master in Automation Studio 3.0 and higher.
    Design4-pin male multipoint connector
    Max. distance1000 m
    Transfer rateMax. 1 Mbit/s
    IF2 interface
    FieldbusPOWERLINK (V1/V2) managing or controlled node
    TypeType 3
    See the POWERLINK help system under "General information, Hardware - IF/LS".
    Design1x shielded RJ45 port
    Cable lengthMax. 100 m between two stations (segment length)
    Transfer rate100 Mbit/s
    Physical layer100BASE-T
    Full-duplexPOWERLINK mode: No / Ethernet mode: Yes
    Auto-MDI / MDIXYes
    EN 60529 protectionIP20 when installed
    Operation0 to 55°C
    Storage-25 to 70°C
    Relative humidity
    Operation0 to 95%, non-condensing
    NoteOrder 2x TB704 terminal blocks separately
    Lithium battery included in delivery
    SlotStandard PCI half-size module, Plug & Play
    Installation in
    B&R Automation PCYes
    B&R Panel PCYes
    Desktop PCYes


  • Interface module with CAN bus and POWERLINK
Product description:
Material number:
Logic scanner, PCI half-size module, 1 POWERLINK (V1/V2) interface, managing or controlled node, 1 CAN bus interface, electrically isolated, max. 500 kbit/s, object buffer in transmit and receive direction, 1 MB SRAM (Automation Runtime), order 2x terminal block TB704 separately
Terminal blocks
  • 0TB704.9

    Accessory terminal block, 4-pin, screw clamps 2.5 mm²

  • 0TB704.91

    Accessory terminal block, 4-pin, cage clamps 2.5 mm²

  • 0AC201.91

    Lithium batteries 4 pcs., 3 V / 950 mAh button cell

  • 4A0006.00-000

    Lithium battery, 3 V / 950 mAh, button cell

Infrastructure components
  • 0AC913.93

    Bus adapter, CAN bus, 2 CAN bus interfaces, including 03 m attachment cable (TB704)

Abrir/cerrar todo
This site uses cookies to enable a better customer experience. By continuing to browse the site you are agreeing to our use of cookies. Please find more information about cookies in our Data privacy statement.