Please choose country and language

Short description
Communication module 2x CAN bus
General information
B&R ID code 0x1F25
Status indicators Module status, data transfer, terminating resistor
Diagnostics
Module status Yes, using status LED
Data transfer Yes, using status LED
Terminating resistor Yes, using status LED
Power consumption 1.2 W
Additional power dissipation caused by actuators (resistive) [W] -
Certifications
CE Yes
ATEX Zone 2, II 3G Ex nA nC IIA T5 Gc
IP20, Ta (see X20 user's manual)
FTZÚ 09 ATEX 0083X
UL cULus E115267
Industrial control equipment
HazLoc cCSAus 244665
Process control equipment
for hazardous locations
Class I, Division 2, Groups ABCD, T5
DNV GL Temperature: B (0 - 55°C)
Humidity: B (up to 100%)
Vibration: B (4 g)
EMC: B (bridge and open deck)
LR ENV1
KR Yes
EAC Yes
KC Yes
Interfaces
Interface IF1
Signal CAN bus
Variant 5-pin male multipoint connector
Max. distance 1000 m
Transfer rate Max. 1 Mbit/s
Terminating resistor Integrated in the module
Controller SJA 1000
Interface IF2
Signal CAN bus
Variant 5-pin male multipoint connector
Max. distance 1000 m
Transfer rate Max. 1 Mbit/s
Terminating resistor Integrated in the module
Controller SJA 1000
Electrical properties
Electrical isolation PLC isolated from CAN (IF1 and IF2) and interfaces from each other
Operating conditions
Mounting orientation
Horizontal Yes
Vertical Yes
Installation elevation above sea level
0 to 2000 m No limitations
>2000 m Reduction of ambient temperature by 0.5°C per 100 m
Degree of protection per EN 60529 IP20
Ambient conditions
Temperature
Operation
Horizontal mounting orientation -25 to 60°C
Vertical mounting orientation -25 to 50°C
Derating -
Storage -40 to 85°C
Transport -40 to 85°C
Relative humidity
Operation 5 to 95%, non-condensing
Storage 5 to 95%, non-condensing
Transport 5 to 95%, non-condensing
Mechanical properties
Note Order 2x TB2105 terminal blocks separately
Slot In X20 CPU
Material number:
X20IF2772
Description:
  • Dual CAN bus connection
  • Integrated terminating resistors

The interface module can be used to expand the X20 CPU for specific applications. It is equipped with 2 CAN bus interfaces.

Mandatory Accessories
Terminal blocks
0TB2105.9010 Accessory terminal block, 5-pin, screw clamps 2.5 mm²
0TB2105.9110 Accessory terminal block, 5-pin, push-in terminal block 2.5 mm²
Automation Studio HW Upgrades Version (Date) Download
V2.6 HW Upgrade (X20IF2772) EXE / 476 KB
V2.6 HW Upgrade (X20IF2772) EXE / 1 MB
V3.0 HW Upgrade (X20IF2772) EXE / 475 KB
V3.0 HW Upgrade (X20IF2772) EXE / 2 MB
V4.0 HW Upgrade (X20IF2772) EXE / 827 KB
Certificates Version (Date) Download
244665 CSA HazLoc Certificate of Compliance X20, X67 PDF / 56 KB
DNV GL Type Approval Certificate - X20 / Power Panel T30 PDF / 171 KB
E115267 UL CoC X20 PDF / 1 MB
FTZU 09 ATEX 0083X PDF / 697 KB
KR Type Approval Certificate MIL39390-AC003 (X20 System) PDF / 758 KB
Lloyds Register PDF / 579 KB
Documentation Version (Date) Download
Datasheet X20IF2772 PDF / 176 KB
X20 System User´s Manual PDF / 50 MB
E-CAD (Electro or EPLAN Templates) Version (Date) Download
X20 EPLAN P8 from V2.4 EXE / 161 MB
M-CAD (Mechan. Templates) Version (Date) Download
3D File DXF/STEP X20 Interface module X20IF2772 ZIP / 39 KB
Dimensions PDF X20 Interface Module X20IF2772 PDF / 4 KB

Please choose country and language

B&R Logo