Short description
| Communication module | 1x RS485/RS422 |
General information
| B&R ID code | 0x1FD0 |
| Status indicators | Data transfer, terminating resistor, operating status, module status |
| Diagnostics | |
| Module run/error | Yes, using status LED and software |
| Data transfer | Yes, using status LED |
| Terminating resistor | Yes, using status LED |
| Power consumption | |
| Bus | 0.01 W |
| Internal I/O | 1.44 W |
| Additional power dissipation caused by actuators (resistive) [W] | - |
| Certifications | |
| CE | Yes |
| ATEX |
Zone 2, II 3G Ex nA nC IIA T5 Gc IP20, Ta (see X20 user's manual) FTZÚ 09 ATEX 0083X |
| UL |
cULus E115267 Industrial control equipment |
| HazLoc |
cCSAus 244665 Process control equipment for hazardous locations Class I, Division 2, Groups ABCD, T5 |
| DNV GL |
Temperature: B (0 - 55°C) Humidity: B (up to 100%) Vibration: B (4 g) EMC: B (bridge and open deck) |
| LR | ENV1 |
| KR | Yes |
| ABS | Yes |
| EAC | Yes |
| KC | Yes |
Interfaces
| Interface IF1 | |
| Signal | RS485/RS422 |
| Variant | Connection made using 12-pin X20TB12 terminal block |
| Max. distance | 1200 m |
| Transfer rate | Max. 115.2 kbit/s |
| FIFO buffer | 1 kB |
| Terminating resistor | Integrated in the module |
| Controller | UART type 16C550 compatible |
Electrical properties
| Electrical isolation | RS485/RS422 (IF1) isolated from bus and I/O power supply |
Operating conditions
| Mounting orientation | |
| Horizontal | Yes |
| Vertical | Yes |
| Installation elevation above sea level | |
| 0 to 2000 m | No limitations |
| >2000 m | Reduction of ambient temperature by 0.5°C per 100 m |
| Degree of protection per EN 60529 | IP20 |
Ambient conditions
| Temperature | |
| Operation | |
| Horizontal mounting orientation | -25 to 60°C |
| Vertical mounting orientation | -25 to 50°C |
| Derating | See section "Derating" |
| Storage | -40 to 85°C |
| Transport | -40 to 85°C |
| Relative humidity | |
| Operation | 5 to 95%, non-condensing |
| Storage | 5 to 95%, non-condensing |
| Transport | 5 to 95%, non-condensing |
Mechanical properties
| Note |
Order 1x X20TB06 or X20TB12 terminal block separately Order 1x X20BM11 bus module separately |
| Pitch | 12.5+0.2 mm |
Material number:
X20CS1030Description:
- RS485/RS422 interface for serial, remote connection of complex devices to the X20 system
- Integrated terminating resistor
In addition to the standard I/O, complex devices often need to be connected. The X20CS communication modules are intended precisely for cases like this. As normal X20 electronics modules, they can be placed anywhere on the remote backplane.
Mandatory Accessories
| Automation Studio HW Upgrades | Version (Date) | Download |
|---|---|---|
| V2.7 HW Upgrade (X20CS1030) | EXE / 461 KB | |
| V2.7 HW Upgrade (X20CS1030) | EXE / 3 MB | |
| V3.0 HW Upgrade (X20CS1030) | EXE / 460 KB | |
| V3.0 HW Upgrade (X20CS1030) | EXE / 4 MB | |
| V4.0 HW Upgrade (X20CS1030) | EXE / 2 MB |
| Documentation | Version (Date) | Download |
|---|---|---|
| Datasheet X20(c)CS1030 | PDF / 831 KB | |
| X20 System User´s Manual | PDF / 56 MB |
| E-CAD (Electro or EPLAN Templates) | Version (Date) | Download |
|---|---|---|
| X20 EPLAN P8 from V2.4 | EXE / 161 MB |
| M-CAD (Mechan. Templates) | Version (Date) | Download |
|---|---|---|
| 3D File DXF/STEP X20 Electronic module | ZIP / 10 KB | |
| 3D File STEP X20 I/O-Slice | ZIP / 872 KB | |
| Dimensions PDF X20 Electronic module | PDF / 3 KB |
